$5 - $9.99

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.

Accurately drill your propellers for your TP 35cc gas engine with this easy-to-use drilling jig. The jig is CNC machined from aluminum stock and is supplied with a clamping screw to hold the propeller secure whilst drilling.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 2000mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 155g (including wire, plug & case)
Dimensions: 126x21x29mm 
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex) 

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*Note: The length of Balance charging wire may vary

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefield, no one wants to compromise on firepower! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go-to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 2000mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 162g (including wire, plug & case)
Dimensions: 125x10x21.5mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex) 

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high-rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

The ToolkitRC SC100 adapter cable is used for powering low-wattage battery chargers or other devices with an XT60 input connector from a USB-C power supply at up to 100W.

Specs:
Type: ToolkitRC SC100 XT60~USB-C Protocol Cable
Input: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Output Voltage: 5~20V max
Output Current: 5A max
Output Connector: XT60
Length: 50cm
Weight: 35g