$2 - $4.99

Upgrade Spur Gear 87T 48P for BSR Racing BZ-222 Racing Buggy

Covers for Body (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35033

Durafly™ Spitfire Mk24 - 5-Blade Hub Set

Servo Tape (Clear) 25mm x 1m

This awesome servo tape is super strong and when the backing is removed it is completely clear. This tape has the amazing property of being very sticky and will securely fasten your servos, receivers, speed controls and transponders to your aeroplane, helicopter car or boat, yet when you wish to remove them, they come right off without the servo tape breaking apart plus there is no residue left on the surface!!

Very clean, very secure and incredibly versatile.

Size
Width: 25mm
Depth: 1mm
Length: 1m

Looking for the professional finish on your next quadcopter project? look no further! This simple and easy to install light module set, will not only provide you with a proffesional look but will also allow your quadcopter to be seen in any conditions with its super bright LEDs

The LED flash light set offers a wide voltage input range from 2-6s and is suitable for quadcopters up to 500mm diameter. 

Features:
• Suitable for quadcopters up to 500mm diameter
• Wide input voltage, 2-6s capability
• High efficiency frequency conversion circuit
• Low power consumption
• No flashing delay or brightness reduction
• High power output
• Simple frequency adjustment

Specs:
LED Cable Length: 500mm
System Weight: 48g
Input Voltage 7.4v ~ 22.2v

SWAT 34 inch Tactical Rifle Gun Bag (Kryptek Nomand)

Features:
• 1000D CORDURA Nylon Construction
• Two ways carrying method (Handheld / Shoulder)
• Padded loop protective edge
• Heavy Duty Zipper 
• Able to carry single rifle with length upto 34” inch
• Main Compartment (850mm X 310mm X 70mm)
• Magazine Pouches (Inside the Bag) carry up to Four M4 / M16 / AK 5.56
7.62 Type magazines
• Low profile zipper front pouch for tools and spare parts

Specs:
Weight: 950g
Material: 1000D Nylon
Color/Pattern: Kryptek Nomand(KN)
Dimension: 850mm X 310mm X 70mm 
Manufacturer: SWAT

SWAT 41 inchTactical Rifle Gun Bag (Kryptek Highlander)

Features:
• 1000D CORDURA Nylon Construction
• Two ways carrying method (Handheld / Shoulder)
• Padded loop protective edge
• Heavy Duty Zipper 
• Able to carry single rifle with length upto 41” inch
• Main Compartment (1020mm X 285mmX 70mm)
• Magazine Pouches (Inside the Bag) carry up to Five M4 / M16 / AK 5.56 / 7.62 Type magazines
• Low profile zipper front pouch for tools and spare parts

Specs:
Weight: 1050g
Material: 1000D Nylon
Color/Pattern: Kryptek  Highlander(KH)
Dimension:  1020mm X 285mm X 70mm
Manufacturer: SWAT 

SWAT 38inch Extreme Double Rifle Gun Bag (Kryptek Typhon)

Features:
• 1000D CORDURA Nylon Construction
• Two ways carrying method (Handheld / Shoulder)
• Padded loop protective edge
• Heavy Duty Zipper 
• Able to carry TWO rifle with length upto 38” inch
• Main Compartment (950mm X 275mm X 70mm)
• Sub-Rifle Compartment (820mm X 255mm x 60mm) 
• Magazine Pouches (Inside The Bag) carry up to Four M4 / M16 / AK 5.56 /
7.62 Type magazine

Specs:
Weight: 1650g
Material: 1000D Nylon
Color/Pattern: Kryptek Typhon
Dimension: Main Compartment (950mm X 275mm X 70mm) , Sub (820mm X
255mm x 60mm) 
Manufacturer: SWAT 

SWAT 3 Day Assault Backpack (Kyrptek Mandrake)

Features:
• Nylon Fabric Construction
• Withstand harsh combat situation 
• Heavy-duty zipper on main compartment 
• CamelBak & Hydration System ready with drink tube exit hole 
• Velcro Patch is ready to be attached onto the front 
• Come with Chest & waist belt for comfort use 
• Highest quality side release buckles 
• Come with cushion padded shoulder harness for comfort use 
• Perfect for Law Enforcement, Military Ops. Also great for outdoor skirmish game use

Spec:
Color: Kyrptek Mandrake
Weight: 1000g
Material: 1000 Denier CORDURA 
Size: Main bag (450mm X 350mm X 160mm) ; Front bag (390mm x 300mm x 60mm)
Manufacturer: SWAT

Protect your Xiaoyi action cam from dirt, splashes and minor knocks with this custom molded silicone case and lens cap set.
Can be used with similar sized cameras.

Specs:
Material: Silicone
Color: Red
Internal dimensions: 60.4 x 42 x 21.2mm

The Precision Spur Gear R2 83T is specially designed for 1/10th scale vehicles using hex type slipper pads such as Team Associated off-road vehicles and a great upgrade for your BZ-222. The Revision 2 version of the gears are precision machined from specially formulated composite material to ensure highest strength, low running noise and excellent reliability. 

The increased contact area improves durability without sacrificing efficiency. The precision machining not only increases the durability of the gears but also provides an improved gear mesh.

All gears feature machined vents and weight reducing holes to minimize heat build-up when running a soft slipper clutch setting. The gears are engraved with size markings for easy identification.

Features:
• Machined composite material for increased strength, low noise and improved reliability
• Increased contact area
• Machined vents and weight reducing holes to minimize heat build-up
• Engraved markings for easy identification

Specs:
Size: 48DPX 83T
Material: Composite
Weight: 5.7g

Polyester Hook and Loop Peel-n-stick (Black) (1 Meter)

Volantex 759-8 Phoenix 2000 - Propeller Blades.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Volantex Phoenix 2000  Replacement Spinner.

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

Hex spinner prop nut Alloy M10x1.00

Excellent double sided tape for outdoor use. This tape is strong and padded.

Great for using on applications that need a bit of padding such as mounting receivers, flight controllers or ESCs. 

Specs:
Width: 20mm
Length: 1500mm

Lightweight Aluminium Round Section Spacer M3x38mm (Silver) (10pcs)

Lightweight aluminium spacers featuring a round cross section and a hex section (at each end) to fit a 5mm spanner. Ideal for use with helicopter and drone frames or similar applications where strong, accurate construction is required.

Specs:
Thread: M3
Length: 38mm
Weight: 1.5g each

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Belly Ball Turret.

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement canopy / battery hatch.

ARC R11 1/10 Electric Touring Car - R11 Rear (Long) Shock Tower

Part Number: R118023

ARC R11 1/10 Electric Touring Car - R11 Suspension Block #2

Part Number: R112020

K&S precision metal is synonymous with the hobby industry, scale builders and hobbyists. Piano wire comes in a variety of sizes and is perfect for producing your own landing gear, control rods, scale buildings, railway models or RC boat models the possibilities are enormous.

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges, colors and lengths to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.