$0.01 - $0.99

5030 Propellers (Black) - 3xCW and 3xCCW - 6pcs per bag

Suited to the Turnigy Micro-quad

5030 Propellers (Red) - 3xCW and 3xCCW - 6pcs per bag

Suited to the Turnigy Micro-quad

This extendable magnetic pick-up tool is a great addition to any toolbox, it makes picking up small metal parts that fall in hard to reach places extremely easy.

Specs:
Magnet Diameter: 7mm
Extended Length: 635mm
Magnet Strength: 1.5kg lift capacity

These are clear versions on the popular 5x3 propeller for mini quad, the clear plastic catches the light from LED illumination to create a glowing disk in the sky great for night flying. The clear plastic is extremely durable and even stronger than some colored variants. 

Features:
• Clear frosted designed for LED night illumination
• Extremely durable material
• Standardized 5mm mounting for a direct replacement

Specs:
Size: 5x3 or 5030
Hub: 5mm
rotation: CW/CCW 

Included:
2 x CW rotation
2 X CCW rotation

Ghost 6030 Orange Propellers For Night Flying LED Illumination Set Of 4 (CW/CCW)

Specs:
Material: Nylon
Size: 6 x 3
Qty: 4pc (2 x CW 2 x CCW)
Color: Orange

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Green
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Black) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Black
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: Orange
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (White) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: White
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Green
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Orange
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Green
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Black) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Black
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Red) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Red
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Diff. Case - BSR 1/8 Rally

Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)

Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)

Hardened Helicopter Pinion Gear 6mm/1.0M 16T (1PC)

These replacement drivers have been specifically designed to fit the Turnigy high quality drivers and drive sets (rubber handled type). The replacement shafts are manufactured from high tensile steel and are hard coated to prevent corrosion.

Specs:
Drive Type: Flat head screwdriver
Tip Size: 5mm
Shaft Diameter: 5mm
Shaft Length: 120mm
Weight: 17.06g

A kit of plywood parts for the Durafly Tundra V1, V2, V3, and Night to build a mount/tray for your FPV equipment. The Tundra series is the perfect mount for FPV flying due to its stability and slow flying characteristics.

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-locking and have an insert fitted to suit 5mm motor shafts.

Specs:
Length: 5inch
Pitch: 3 inch
Center Hole:5mm
Weight:  5.3g each
Rotation: Clockwise and counterclockwise

The MultiStar White edition multirotor propeller started as an optimized blade design for the target motor/RPM combinations in Multirotor use. After comparing a host of construction options, a wood core was selected for its super stiff property’s, light weight and vibration resistant properties.

The MultiStar White Edition Propellers come packaged in a set of two CW/CCW and matching mounting hardware and thrust washers. The high visibility White color adds safety and style to your multi-rotor setup.

Specs:
Size: 9.4X4.3
Mounting Style: Hub Style with CW/CCW shaft nuts included 

Included:
One CCW and one CW propeller
Mounting Hardware and thrust washer (DJI Style shaft nuts)

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

Possibly one of the hottest debates in recent R/C history...balsa or foam? This is the shirt all of you balsa bandits have been waiting for. Slap your foamy friends across the face and tell them to read this.

Size: Large

*Note: Other sizes available

TrackStar TS3t Temperature Sensor for Electric Car/Boat

Specs:
Lenght: 390mm
Plug: JR plug

Spice up your Turnigy ActionCAm with these high quality original replacement faceplates in a wide variety of colors. Swapping out these faceplates is a breeze, simply pop off the original and snap on the new. With these optional faceplates you can easily make your Turnigy ActionCam match your favorite color, your model or even your outfit!

Spec.:
Color: Bronze

TrackStar Shock End Caps 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Suspension Spring Retainer 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Big Bore Suspension Spring Retainer 13mm (4) S124103

Compatible with the following Shock Absorbers
S124300, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:55mm
Spring Rate:  1.8Kg
Color: Red

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:55mm
Spring Rate:  1.5Kg
Color: Silver

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326