Vehicles

Alu. Stabilizer Holder - 1/10 Hobbyking Mission-D 4WD

63mm TurnFin Set L&R - Suit HobbyKing Vanquish 1075MM BOAT

Spec.:
Height: 63mm
Width: 24.7mm
Weight: 32g

RJX X-TRON 500 6 x 12 x 4mm Bearing # X500-8003 (2pcs)

Screw Countersunk Phillips M2.5x12mm (10pcs/pack)

A 1/10 scale model of a typical Formula-1 tunnel hull racing boat that is a stunning design and made of high quality fiberglass, it is beautifully finished in high gloss gel-coat and has eyecatching graphics already applied.

This is a hull only so that you can customize your own motor, ESC,  battery and radio set up to make this one really fast boat.

Specs:
Length: 650mm
Width: 270mm
Height: 190mm
Weight: 730g (hull only)

Required:
540 size outboard motor unit
ESC to suit above unit
2~3S 3000mah to 4000mah lipoly battery
1 x standard size servo
1 set of steering linkages
2ch transmitter and receiver system

Exhaust Pipe Holder 1/16 Turnigy 4WD Nitro Racing Buggy (1pcs/Bag)
Part No.: 30812

Light Set (Complete) - A2033 (1pair)

Quanum Skull Crusher 2WD - Drive Shaft/CVJ

A2032 and A2033 33434 CVD

Clutch Gears 14T - A3015

Metal Rear Shock Shaft - A3015 (2pcs)

Full Alloy Metal Steering Knuckle Arms L/R - A2038 & A3015 (1pair)

Front C Hub L/R - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Steering Knuckles - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Big Hex Wheel Nuts - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (4pcs)

Basher Nitro Circus MT, SaberTooth Truggy - Wheel Hub

Rear Outdrive - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (2pcs)

Dogbones Cup - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Basher Nitro Circus MT, SaberTooth Truggy - Outdrive Washers

Diff. Box Gasket - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (6pcs)

44T Spur Gear - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Basher Nitro Circus MT, SaberTooth Truggy - Middle Diff. Outdrive

Steering Linkage Plate - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Gearbox Washers (13.2*16*0.2) - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (10pcs)

Pins - Nitro Circus Basher 1/8 Scale Monster Truck (10pcs)

Part no.: BS33516

Servo Linkage - Nitro Circus Basher 1/8 Scale Monster Truck (4pcs)

Part no.: BS33519

Manifold 1set(nickel plating) - A3007

One Way Ball Bearing - Trooper Nitro

4mm Gold Connectors - Low Profile (10pc)

Ideal for use with Hardcase packs for RC cars these plugs will allow you to fit your battery in the tightes of battery compartments.

Low Profile Bullect Connectors are preferred by racers world wide.

Pro Tip: If you find the bullets hard to plug in to your battery take a set of needle nose pliers and gently squeeze two of the four prongs, turn the plug and repeat on the other two prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 26 x 16 x 8mm + 15mm pin length 
Material: Aluminum

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 23.5 x 13 x 8mm + 8mm pin length
Material: Plastic / Steel

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions:  26x16x10mm + 10mm pin Length
Material: Plastic / brass

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 10AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Black

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

*This item is only available as 1m lengths, if you wish to purchase longer continuous lengths use R12A1062-06

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Black

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Blue