Vehicles

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 4074
Number of pole: 4
Motor KV: 2000
Max Current: 120A
Max Voltage: 25V / 6S Lipoly
Case Length: 74mm
Case Dia: 40mm
Shaft Dia: 5.0mm
Total Length: 91mm
Weight: 380g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Weight: 275g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-2200KV
Poles: 4
KV: 2200
Max Current: 70A
Max Voltage: 25.2V/6S Lipo
Max Watts: 1750w
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1900KV
Poles: 4
KV: 1900
Max Current: 61A
Max Voltage: 29.4V/7S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1650KV
Poles: 4
KV: 1650
Max Current: 70A
Max Voltage: 33.6V/9S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK2845-3650KV
Poles: 4
KV: 3650
Max Current: 48A
Max Voltage: 16.8V/4S Lipo
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Specs:
Size: XK2845-1980KV
Poles: 4
KV: 1980
Max Power: 220W
Max Current: 24A
Max Voltage: 33V (2-4S LiPo)
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Spec.:
Size: XK2858-2900KV
Poles: 4
KV: 2900
Max Power: 1300W
Max Current: 58A
Max Voltage: 23V (6S LiPo)
Case Length: 58mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 70mm
Weight: 160g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Diff. Case - BSR 1/8 Rally

Front CVD (1set) - BSR 1/8 Rally

6.8 Steering Ball Stud (6pcs) - BSR 1/8 Rally

Fibre Reinforced Fan Mount - BZ-444 Pro 1/10 4WD Racing Buggy

Clear Body (PVC) w/Masking Tape - BSR Racing BZ-444 RTR 1/10 4WD Racing Buggy

*Note: This body only suitable for RTR version chassis only!!!

Option Alu. Front Arm Mount Set - BSR Racing BZ-444 or BZ-444 Pro 1/10 4WD Racing Buggy

6mm Ball Stud - BSR Racing BZ-444 or 444 Pro 1/10 4WD Racing Buggy (8pcs)

Replacement battery support brace for BT-4 - Plastic. 

BT-4 Rear Suspension Arm Mount R2.0 TU1007

BT-4 Solid Axle TU1042

BT-4 Straight shaft (Spool) TU1042-2

Progressive Shock system for BT-4 gives a progressive dampening effect through the shock travel so the effect is softest at the start and harder at the end. Includes blank shock pistons so you can drill your own holes for precise tuning to your individual needs.

Specs:
Length: 14mm
Diameter: 11mm
Piston: 10mm x 2mm

These replacement drivers have been specifically designed to fit the Turnigy high quality drivers and drive sets (rubber handled type). The replacement shafts are manufactured from high tensile steel and are hard coated to prevent corrosion.

Specs:
Drive Type: Flat head screwdriver
Tip Size: 5mm
Shaft Diameter: 5mm
Shaft Length: 120mm
Weight: 17.06g

Turnigy analog micro servo offering good torque, high speed, excellent centering and a great price!

The strong gear train is all metal geared.

Specs:
Weight: 9g
Size: 23.1mmx12.0mmx25.9mm
Torque: 1.6kg.cm (4.8v)2 kg.cm (6.0v)
Speed: 0.08 sec/60deg (4.8v)0.07 sec/deg (6.0v) 
Voltage: 4.8-6.0v
Type: Analog Micro
Gear Train: Metal
Ball Bearing: No
Lead Length: 240mm
Plug: JR/Futaba
Spline Count: 20

Looking for solid, high torque servos for your 1/5th scale car, truck or buggy? The Trackstar TS-500HD servos are just the ticket! The servos have a torque range of 27.3 - 32kg whilst still maintaining good operating speeds across its 4.8 - 7.4v input range. The servo's temperature is maintained by its beautifully machined heat sink housing which has a cool red anodized finish.

The Trackstar TS500HD servos are an excellent choice for everday bashing and can even handle the toughest of off-road tracks in almost any race conditions!

Servos are supplied complete with control horns and all necessary fixtures and fittings.
  
Specs:
Operating Voltage: 4.8 ~ 7.4v
Weight: 188g
Dimensions: 68 x 60 x 30 mm
Torque: 27.3kg (4.8v) 30.5kg (6.0v) 32kg (7.4v) 
Speed: 0.22sec/60deg (4.8v) 0.20sec/60deg (6.0v) 0.19 sec/60deg (7.4v)
Motor: Brushed DC motor 
Gear Train: Metal
Spline Count: 17

If you're looking for the ultimate steering servo for your 1/10th touring, drift car or buggy, we have just the thing!

The TrackStar TS-D99X is a standard size low profile digital servo featuring a titianium geartrain, coreless motor and a fast 0.08sec transit time. Add to that it's excellent performance and tricked out looks, and you have one outstanding steering servo for the price!

Specs:
Weight: 45g
Size: 40mmx20mmx25.5mm
Torque: 8kg.cm (4.8V)~10kg.cm (6.0V)
Speed: 0.09 sec/60deg (4.8V)~0.08 sec/60deg (6.0V)
Voltage: 4.8V~6.0V
Type: Digital Standard
Gear Train: Titanium
Ball Bearing: Dual BB
Servo teeth: 25T
Lead Length: 285mm
Plug: JR/Futaba

The Turnigy TG9d is the new standard in low cost digital servos in the 9 gram class. Boasting the holding power and precision of digital, something needed for your small, high performance park flyers. We include a selection of servo arms to work with most applications. With a price tag that rivals cheaper analog servos, the TG9d is a awesome upgrade that won't beak the bank.

Features:
• Plastic Bushing
• Heavy Duty Output Spline
• Servo arms & screw included
• Perfect for high performance parkflyers

Specs:
Size : 22.4x12.5x23mm 
Voltage : 4.8v~6v
Weight: 9g / 0.39oz
Speed : 0.10 sec/60 (4.8V)0.09 sec/60 (6.0V)
Torque : 1.6kg-cm (4.8V)1.8kg-cm (6.0V)
Working Temp : -30C~60C 
Gears: Nylon White type
Spline Count: 21

If you're looking for the ultimate steering servo for your 1/12th pan car, we have just the thing!

The TrackStar TS-P12S is a mini size high speed digital servo featuring a titianium geartrain, coreless motor and a fast 0.05sec transit time. Add to that it's excellent performance and tricked out looks, and you have one outstanding steering servo for the price!

Specs:
Weight: 28g
Size: 36mmx15mmx29mm
Torque: 2.8 kg.cm (4.8V)~3.6 kg.cm (6.0V)
Speed: 0.06 sec/60deg (4.8V)~0.05 sec/60deg (6.0V)
Voltage: 4.8V~6.0V
Type: Digital Standard
Gear Train: Titanium
Ball Bearing: Dual BB
Servo teeth: 25T
Lead Length: 285mm
Plug: JR/Futaba

Turnigy TGY-AN13 analog car servo suitable for 1:8 & 1:10 scale cars with a tough, metal geartrain.

Supplied with a full hardware pack.

Specs:
Torque: 13.2kg/cm (4.8V)~14.5kg/cm (6.0V)
Speed: 0.15sec/60deg (4.8V)~0.13sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Analog
Gear Train: Metal
Plug: JR type
Size: 40 x 37.5 x 20mm
Weight: 58g
Spline Count: 25

Basher RZ-4 1/10 Rally Racer - Composite Rear Upright (2pcs)

Basher RZ-4 1/10 Rally Racer - 30mm Complete Rear Tire Set - Yellow (2pcs)

TrackStar TS3t Temperature Sensor for Electric Car/Boat

Specs:
Lenght: 390mm
Plug: JR plug