Vehicles

This 45A brushed ESC is a great replacement for your model's stock ESC or for setting up a new brushed power system in your car or truck. It features a low voltage cut-off for use with lipoly batteries. Its compact and lightweight design make it ideal for use in 1/10 scale drift cars utilizing brushed motors.

Features:
• Low voltage cutoff for use with Lipoly batteries
• Compact and lightweight design
• 5.6V/2A BEC

Specs:
Continuous Current: 45A
Burst Current: 320A (10sec)
Suitable Car: 1/10 on and off road
Battery: 2 cell Lipo (5-6 cells NI-xx)
BEC output: 5.6V/2A switch mode built-in
Motor type: brushed
Operation: Forward/Brake/Reverse
Dimension: 38x28x22mm
Weight: 40g

HobbyKing is now proud to offer the famous Bittydesign approved 1/10 190mm Racing Body Shell and Body accessories!

The Striker-SR 3.0 version body has been developed for many months with several tests with the result of real fast bodyshell that combines a steering efficiency togheter with highest rear stability. It comes with big efra spec downforce rear wing that provide the best balance from front/rear axle of your car.

The bodyshell is EFRA, IFMAR, ROAR and BRCA approved.

The body is particular indicated for surfaces with a high level of grip, the use of our "Ultra Charge" Hard wing is suggested.

Features:
• The body comes with a complete set of lightweight big plastic washers to fix the rear wing perfectly. Steel screws nuts are includeds in the kit (you don't need to purchase any aftermarket accessory to fix our wing)

• Lightweight 0.75mm thickness
• EFRA, IFMAR, ROAR and BRCA approved
• Best performances on high grip surfaces
• Made with high quality polycarbonate
• Clear body sold with Protective film
• Windows masks & decals sheet included

*Note: Body shell requires finishing such as painting, cutting out of the wheel wells and applying decals.

The Precision Spur Gear R2 83T is specially designed for 1/10th scale vehicles using hex type slipper pads such as Team Associated off-road vehicles and a great upgrade for your BZ-222. The Revision 2 version of the gears are precision machined from specially formulated composite material to ensure highest strength, low running noise and excellent reliability. 

The increased contact area improves durability without sacrificing efficiency. The precision machining not only increases the durability of the gears but also provides an improved gear mesh.

All gears feature machined vents and weight reducing holes to minimize heat build-up when running a soft slipper clutch setting. The gears are engraved with size markings for easy identification.

Features:
• Machined composite material for increased strength, low noise and improved reliability
• Increased contact area
• Machined vents and weight reducing holes to minimize heat build-up
• Engraved markings for easy identification

Specs:
Size: 48DPX 83T
Material: Composite
Weight: 5.7g

Screw Grub Hex M5x5mm (10pcs/pack)

Diff.Gear Housing (2pcs) - 118B, A2006, A2023T and A2035

Pins for Front Upright 2 pcs - 118B, A2006, A2023T and A2035

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Red is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Length: 1m
Colour: Translucent Red

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Black is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Lenght: 1m
Colour: Translucent Black

Turnigy 1/2" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

Turnigy 3/8" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

Replacement 2.5mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 3.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 4.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

ARC R11 1/10 Electric Touring Car - R11 Rear (Long) Shock Tower

Part Number: R118023

ARC R11 1/10 Electric Touring Car - R11 Suspension Block #2

Part Number: R112020

Enhance the scale appearance of your drifter or scale crawler with these clever, hidden magnetic fixings.

Now you can increase the fun with your BSR Berserker with this simple to install wheelie bar set. Includes ball-raced wheels, carbon fixing plates and wheel support cradle.

Now you can increase the fun with your BSR Berserker with this simple to install wheelie bar set. Includes ball-raced wheels, carbon fixing plates and wheel support cradle.

The QUICRUN series of ESCS is the latest range of competitively priced brushed and brushless Speed Controllers for use in a wide range of RC vehicle applications. 

The QuicRun WP 1625 is specially designed for beginners and intermediate modelers.

The Turnigy TGY-WP23 is one of the latest standard size servos that has an aluminum center case which acts as a heatsink and gears made of titanium and steel. This servo has a digital amplifier which helps it achieve an incredible 23kg of holding power and is no slouch in the speed department either with a speed of 0.12sec.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

Ultra-Cure Tire Glue has a water-thin viscosity that wicks deep into the bead of the tire and cures in a matter of a few seconds. The tire bead must be tight fitting and should be held together while you apply the CA around the edges of the seam.

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium-grade steel shafts.

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium-grade steel shafts.

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Front Sway Bar Set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy / Nitro  Circus MT