Vehicles

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 1700kv
Poles: 4
Max voltage: 22.2v (6S)
Max Current: 84A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Weight: 270g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Weight: 275g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-2200KV
Poles: 4
KV: 2200
Max Current: 70A
Max Voltage: 25.2V/6S Lipo
Max Watts: 1750w
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1900KV
Poles: 4
KV: 1900
Max Current: 61A
Max Voltage: 29.4V/7S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK2845-3650KV
Poles: 4
KV: 3650
Max Current: 48A
Max Voltage: 16.8V/4S Lipo
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Specs:
Size: XK2845-1980KV
Poles: 4
KV: 1980
Max Power: 220W
Max Current: 24A
Max Voltage: 33V (2-4S LiPo)
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Spec.:
Size: XK2858-2900KV
Poles: 4
KV: 2900
Max Power: 1300W
Max Current: 58A
Max Voltage: 23V (6S LiPo)
Case Length: 58mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 70mm
Weight: 160g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

The FT009 is a High Speed, V-hull racing boat that is fast, fun and easy to use. Its stylish design is nice to look at and it really performs for a boat of this size. If you capsize the FT009 during high speed cornering no problems! It has an inbuilt self-righting function, just apply the throttle and it flips up the right way. All out full speed power runs and sharp banking turns on your favourite waterway are a blast, the FT009 is a ton of fun packed into 460mm of high speed boat.

Being completely ready to run, it is great for both beginners and experienced boaters alike and would make an ideal One Design race boat for novices wanting to get into RC electric boat racing. It’s powered by a 7.4, 1500mAh V Li-ion battery which really packs a punch and comes with a 2.4GHz transmitter offering interference free running at any boating site. The motor, ESC and steering servo are all pre-installed.

A great little boat at a great price.

Features:
• Completely "Ready to Run"
• 7.4V 1500Li-ion battery powered Battery charger
• 2.4GHz transmitter included
• 100 to 150 meters operational distance
• Speed approximately 30 km/h
• Charging time approximately 4 hours
• Run time approximately 5 to 6 minutes
• Sealed receiver compartment
• Sealed main hatch
• Water cooling for motor
• Forwards, backwards, left and right directional control
• Self-righting function

Specs:
Length: 460mm
Motor: 540 brushed racing motor
Battery: 7.4V 1500 MAh Li-ion
Transmitter: 2.4GHz
Color: Orange 

Included:
V-Hull Racing Boat
2.4GHz Transmitter
7.4V Li-ion Battery
110~240VAC Battery Charger (UK style plug)
Spare Propeller
Bow Bumper
Boat stand

Required:
6 x AA batteries for transmitter

Note: Check accessories listing below for mains power adapters.

The FT009 is a High Speed, V-hull racing boat that is fast, fun and easy to use. Its stylish design is nice to look at and it really performs for a boat of this size. If you capsize the FT009 during high speed cornering no problems! It has an inbuilt self-righting function, just apply the throttle and it flips up the right way. All out full speed power runs and sharp banking turns on your favourite waterway are a blast, the FT009 is a ton of fun packed into 460mm of high speed boat.

Being completely ready to run, it is great for both beginners and experienced boaters alike and would make an ideal One Design race boat for novices wanting to get into RC electric boat racing. It’s powered by a 7.4, 1500mAh V Li-ion battery which really packs a punch and comes with a 2.4GHz transmitter offering interference free running at any boating site. The motor, ESC and steering servo are all pre-installed.

A great little boat at a great price.

Features:
• Completely "Ready to Run"
• 7.4V 1500Li-ion battery powered Battery charger
• 2.4GHz transmitter included
• 100 to 150 meters operational distance
• Speed approximately 30 km/h
• Charging time approximately 4 hours 
• Run time approximately 5 to 6 minutes
• Sealed receiver compartment
• Sealed main hatch
• Water cooling for motor
• Forwards, backwards, left and right directional control
• Self-righting function

Specs:
Length: 460mm
Motor: 540 brushed racing motor
Battery: 7.4V 1500 MAh Li-ion
Transmitter: 2.4GHz
Color: Green 

Included:
V-Hull Racing Boat
2.4GHz Transmitter
7.4V Li-ion Battery
110~240VAC Battery Charger 
Spare Propeller
Bow Bumper
Boat stand

Required:
6 x AA batteries for transmitter

Note: Check accessories listing below for mains power adapters. 

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

Features:
• 【HIGH SPEED RC BOATS WITH BRUSHLESS MOTOR】The water-cooled brushless motor provide more power to the remote controlled boat Vector SR48 to make waves at 30MPH and blow other radio controlled boats out of the water! Innovative hull design with low resistance, stable racing and fast speed.
• 【MULT-FUNCTION REMOTE CONTROL BOAT】Auto self-righting features get the RC racing boat back to the game quickly while the boat is capsizing. The special reverse-function will keep you stay away of obtacle, just need to reverse it back to route. Have more fun with the remote control watercraft.
• 【HAVE MORE FUN WITH THE BRUSHLESS RC BOATS & SHIPS】High waterproof system with only a single cover can keep the water out of fast rc boat. 2.4Ghz radio-controlled distance of over 656ft, good interferrence ability, allows more than 20 remote control boats to be raced at the same time.
• 【BEST FAST RC BOATS FOR ADULTS & KIDS, BOYS & GIRLS】No matter your skill level, features everything experts and beginners alike want in VectorS. Fully assembled, no installation required. Include all parts needed to get the RC racing boat started. RTR version will make it portable with you wherever you go. Now just have fun with your kids!

Specs:
Material: ABS
Art.No.: 797-4
Motor: Brushless 20A Water Cooling
Maximum speed: 30MPH
Remote Control: 2.4GHz control remote
Remote Control Distance: 200 meters
Remote Control Battery: 4 AA batteries (not included)
Ship Battery: 11.1V 1000mAh lithium battery
Charger: USB charging cable
Use Time: 15+ minutes
Charging Time: 120 minutes
Product Dimensions: 45 x 12 x 10cm
Product Weight: 380g
Packing: Graphic Carton

Included:
1 x Boat
1 x Remote Control
1 x Charger
1 x Manual

Required:
4 x AA batteries for transmitter

Features:
• 【HIGH SPEED RC BOATS WITH BRUSHLESS MOTOR】The water-cooled brushless motor provide more power to the remote controlled boat Vector Lumen S to make waves at 30+MPH and blow other radio controlled boats out of the water! Innovative hull design with low resistance, stable racing and fast speed.
• 【MULT-FUNCTION REMOTE CONTROL BOAT】Auto self-righting features get the RC racing boat back to the game quickly while the boat is capsizing. The special reverse-function will keep you stay away of obtacle, just need to reverse it back to route. Have more fun with the remote control watercraft.
• 【2 RECHARGEABLE BATTERIES】Our RC Jet Boat is powered by TWO 7.4V 1000mAh powerful rechargeable batteries, giving you over 30 minutes of continuous racing adventure on the water. Compared with other RC boats on Amazon, our RC Jet Boat stands out with its long life and excellent performance, making every voyage on the water full of passion and challenges!
• 【HAVE MORE FUN WITH THE BRUSHLESS RC BOATS & SHIPS】High waterproof system with only a single cover can keep the water out of fast rc boat. 2.4Ghz radio-controlled distance of over 656ft, good interferrence ability, allows more than 20 remote control boats to be raced at the same time.
• 【DURABILITY AND LONGEVITY】Our racing boat is constructed with high-quality materials, including an upgraded anti-collision silicone head for enhanced durability. Built to withstand harsh conditions and the rigors of extreme racing, it ensures long-lasting performance. A low battery and weak signal alarm system keeps you informed, ensuring a pleasant and uninterrupted water journey.
• 【BEST FAST RC BOATS FOR ADULTS】No matter your skill level, features everything experts and beginners alike want in Vector lumen S. Fully assembled, no installation required. Include all parts needed to get the RC racing boat started. RTR version will make it portable with you wherever you go.

Specs:
Color: Azul,Verde
Age Range: 16-18 años,Más de 18 años,Más de 15 años
Marca: Volantex
Control Channels: 2 canales
Frecuencia: 2.4GHz
Are Batteries Required: Yes
Additional Features: Portable, Rechargeable

Included:
1 x RC Boat
1 x Battery(built in)
1 x Remote Controller
1 x USB Charging Cable
1 x Display Bracket
1 x Manual
1 x Tool
1 x Spare Propeller

Required:
4 x AA batteries for transmitter

Features:
• 【HIGH SPEED RC BOATS WITH BRUSHLESS MOTOR】The Arrobolt Lumen S is propelled by a powerful water-cooled brushless motor, designed for enthusiasts seeking exhilarating speeds up to 35+MPH. This motor, coupled with an innovative low-resistance hull, ensures stable and swift racing. The full-throttle control allows for precise speed adjustments, providing a responsive and engaging experience that hobbyists crave.
• 【MULT-FUNCTION REMOTE CONTROL BOAT】Auto self-righting features get the RC racing boat back to the game quickly while the boat is capsizing. The special reverse-function will keep you stay away of obtacle, just need to reverse it back to route. Have more fun with the remote control watercraft.
• 【HAVE MORE FUN WITH THE BRUSHLESS RC BOATS & SHIPS】High waterproof system with only a single cover can keep the water out of fast rc boat. 2.4Ghz radio-controlled distance of over 656ft, good interferrence ability, allows more than 20 remote control boats to be raced at the same time.
• 【DURABILITY AND LONGEVITY】 Our racing boat is constructed with high-quality materials, including an upgraded anti-collision silicone head for enhanced durability. Built to withstand harsh conditions and the rigors of extreme racing, it ensures long-lasting performance. A low battery and weak signal alarm system keeps you informed, ensuring a pleasant and uninterrupted water journey.
• 【BEST FAST RC BOATS FOR ADULTS】No matter your skill level, features everything experts and beginners alike want in Arrobolt lumen S. Fully assembled, no installation required. Include all parts needed to get the RC racing boat started. RTR version will make it portable with you wherever you go.

Specs:
Color: Green,Red
Age Range: 16-18 Years,Over 18 Years,Over 15 Years
Brand: Volantex
Control Channels: 2 Channels
Frequency: 2.4GHz
Required Assembly: Ready to Go/RTR/RTF (All included)

Included:
1 x RC Boat
1 x Battery(built in)
1 x Remote Controller
1 x Display Bracket
1 x Manual
1 x Tool
1 x Spare Propeller

Required:
4 x AA batteries for transmitter