Chargers

Smart charging: The HOTA T8 charger and checker is equipped with intelligent features to ensure safe and efficient charging of your batteries.

Hota T6 battery charger is a small size charger designed for 1-6s LiHV/Life/Lilon/Lixx/Lipo batteries . It supports DC/PD input, with DC input charging powersoared to 300W, the maximum charging current can reach 15A. It is small, safe and reliable, great for the fpv racing drone batteries.

Specification:
Max Charge Capacity: DC 500W
Charge Current: 0.1A-20.0A
Max Discharge Capacity: 15W
Discharge Current: 0.1A-1.5A
Input Voltage: DC 10-34V
Ouput Voltage: DC 1-35

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

The IMAX B6 V2 follows the lineage of the original B6 but has been improved by increasing the maximum charge power from 50W to 60W, and the maximum charge current from 5A to 6A. Another addition to the V2 is an "AGM Charge" for charging AGM Pb batteries and a "Cold Charge" for charging Pb batteries in cold weather. AGM Pb batteries can be charged up to 5 times faster than conventional Pb batteries, this mode enables this different higher charging rate process. When charging Pb batteries in cold weather special consideration is also required, a cold Pb battery requires a higher charge voltage than when it is warmer, the V2 will also sort this for you when the "Cold Charge" mode is selected. Another additional feature is the "DJI Battery Program", which allows you to charge DJI Mavic TB4X batteries using your B6 charger.

The HOTA range of chargers/dischargers is quickly becoming renowned for their quality, reliability, and numerous great features. This amazing dual charger/discharger can charge up to 2 x 300W all in a tiny package measuring 111x70x45mm and weighing just 292g. It offers loads of protection to safeguard against damaging itself or your battery packs such as temperature protection, capacity protection, input and output reverse protection, short circuit protection, and much more. See the attached user manual for the full list of features and protections.

The ISDT Q8 packs a real punch, with the ability to charge 8 LiPo, LiIon, or LiFe cells, and 7 LiHv cells at up to a staggering 30A (1000W max). It features an up-to-date touch screen that accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging/discharging features with ease. This allows for fast, and easy programming and is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 2.4" IPS LCD screen, this also has a viewing angle of up to 178°. 

The ISDT P20 has the ability to charge 2 x 8S LiPo, LiIon, LiFe, or 7S LiHv, 12S Pb, and 16S NiMh/NiCd battery packs up to 20A and a max of 500W per channel, each channel can operate independently of the other. You can even combine both channels in parallel for synchronous balance charging at up to 35A and 800W. The display accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging features with ease. This allows for fast, and easy programming which is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 3.5" IPS LCD screen which has a wide viewing angle. 

ISDT is renowned for its ergonomically designed, small, state-of-the-art battery chargers and accessories. The K1 smart charger continues this great pedigree of efficient and user-friendly chargers.

The ISDT K1 is a simple to use, no-nonsense dual input (AC/DC) charger that can charge two battery packs simultaneously. It has the ability to charge 2 x 6S LiPo, LiIon, LiFe, or LiHV, 10S Pb, or 16S NiMh/NiCd battery packs at up to 10A. Also, each channel can operate independently of each other, meaning that two different sizes or different chemistry batteries can be charged at the same time. You can even combine both channels in parallel for synchronous balance charging to achieve even more output power. The max charging current on AC power is 100W per channel, and on DC power it is 250W per channel. The four programming keys are simple and intuitive to use in conjunction with the color LCD display screen.

The HOTA range of chargers/dischargers is quickly becoming renowned for their quality, reliability, and numerous great features. This amazing 1000W 4-channel charger/discharger can charge 4 x 1~6S LiPo and batteries at up to 4 x 250W, or you can combine 2 outputs together to achieve up to 500W. It offers loads of protection to safeguard against damaging itself or your battery packs such as temperature protection, over-voltage, over-current, input and output reverse protection, short circuit protection, and much more (see the attached manual for the full list). It utilizes a highly optimized algorithm for charging management, and its advanced circuit design offers a 94% operating efficiency.

The ToolkitRC M7AC is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M7AC is lightweight, and compact, and it has a built-in power supply so that it can operate from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC Q4AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q4AC has a built-in 100W power supply that allows it to be powered from a 100~240V AC mains power source. It also has the ability to operate on a 10~18V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M9 is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), wattmeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M9 is lightweight and compact, and it operates on a 7~35V DC power supply which makes it perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M4 Pocket is an ultra-compact palm-size balance charger, despite its small size, it can charge a 1~4S battery pack at up to 80W. It is simple and intuitive to use, has an easy-to-read, wide angle, IPS 1.54"x240x240 pixel full-color LCD screen, and a simple, single programming button.

The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging, and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M7 is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, resistance measuring, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, and so much more. The M7 is lightweight and compact, and it operates on a 7~28V DC power supply which makes it perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M4AC is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V) and can charge 1~4S battery packs at up to 2.5A, and a maximum of 30W.

The ToolkitRC M6D is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, and smart consumer-grade drone battery charging, it also has a multilingual user interface. The M6D is a DC unit only, so requires an input voltage of 7~28V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can be connected to a mains power supply that can supply the correct DC voltage, and a current of 30A.

The ToolkitRC M8S is a versatile, multifunction tool that integrates functions such as charging, discharging, resistance measuring, signal test/signal source for servo, and receiver testing, PWM/PPM/SBUS, ESC watt meter, smart consumer-grade drone battery charging, and so much more.  The M8S is a DC unit only, so requires an input voltage of 7~30V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can be connected to a mains power supply that can supply the correct DC voltage, and a current of 18A.

This Turnigy balance charger is simple to use, reliable and safe for any modeler. It features smart charge protection to ensure the batteries are not overcharged and has real-time monitoring increasing the cycle life of your battery packs. It can be powered from any 12V output and charges at 800mA. Charging is through the JST-XH balance lead on your compatible battery. Suits all Turnigy, Zippy, and most other battery types. You can easily connect several of these chargers to the same power source to charge multiple packs at once.

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart charger/balancer. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection, and much much more. Programming is extremely straightforward and intuitive with the simple-to-use touch buttons, easy-to-read LCD screen, and easy-to-follow menus.

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart charger/balancer. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection, and much much more. Programming is extremely straightforward and intuitive with the simple-to-use touch buttons, easy-to-read LCD screen, and easy-to-follow menus.

TURNIGY continues to lead the way in compact AC/DC battery chargers with the ACCUCELL C150 smart charger/balancer. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries as well as having battery management systems, 20 charge/discharge memories, error protection, and much much more. Programming is extremely straightforward and intuitive with the simple-to-use touch buttons, easy-to-read LCD screen, and easy-to-follow menus.

Turnigy has moved into the next decade of the 21st century with the T240 touchscreen charger. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries. It also has battery management, security settings, and operation data memory, and can charge two different battery chemistries simultaneously. Programming is very straightforward by using the 3.2-inch color LCD touchscreen display.

Turnigy has moved into the next decade of the 21st century with the T240 touchscreen charger. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries. It also has battery management, security settings, and operation data memory, and can charge two different battery chemistries simultaneously. Programming is very straightforward by using the 3.2-inch color LCD touchscreen display.

Turnigy has moved into the next decade of the 21st century with the T240 touchscreen charger. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries. It also has battery management, security settings, and operation data memory, and can charge two different battery chemistries simultaneously. Programming is very straightforward by using the 3.2-inch color LCD touchscreen display.

The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC Q4AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q4AC has a built-in 100W power supply that allows it to be powered from a 100~240V AC mains power source. It also has the ability to operate on a 10~18V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC Q4AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q4AC has a built-in 100W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 10~18V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M7AC is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M7AC is lightweight and compact, and it has a built-in power supply so that it can operate from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M7AC is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M7AC is lightweight and compact, and it has a built-in power supply so that it can operate from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M4AC is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V) and can charge 1~4S battery packs at up to 2.5A, and a maximum of 30W.