More than just a fancy name, the Turnigy Nano-Tech LiPo batteries are designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and higher discharge rates than similar LiPo batteries.

Designed specifically for the E-flite micro series. A direct replacement for the E-flite 2S 200mah lipoly battery - E-flite part #: EFLB2002S25.

More punch, more power and longer flight times are only the beginning. When tested with the E-flite micros, the differences between a regular pack and the nano-tech where remarkable! Power output and flight time were greatly improved due to the higher discharge rate and true capacity.

Bring your E-flite micro to life with the nano-tech upgrade cells!

Spec.
Capacity: 300mAh
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 35C Constant / 70C Burst
Weight: 16g (including wire, plug & case)
Dimensions: 44x18x12mm
Discharge Plug: E-Flight Ultra Micro

Suited to the following models: E-flite micros utilizing EFLB2002S25 battery

* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

Designed specifically for the Walkera V120D02S and Walkera QR Infra X. This nano-tech battery pack offers 150mAh greater capacity than the original Walkera battery with a much higher discharge rate. More punch and longer flight times are only the beginning. When tested with the Walkera V120D02S the differences between the original battery and the nano-tech where remarkable!

The Turnigy nano-tech round single series cells are the perfect solution for many applications where space and weight are at a premium. These round Lipoly cells can be soldered together to make custom packs to suit your needs.

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! 

Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Spec.
Capacity: 750mAh
Voltage: 1s / 3.7V
Discharge: 35C Constant / 70C Bursts
Weight: 19.5g
Dimensions: 43 x 24 x 9.5mm
Balance Plug: N/A
Discharge Plug: JST + Walkera

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity. These additives create the ability for imbibition in the carrier liquid to supply more ion channels.

This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.

More than just a fancy name. TURNIGY nano-tech Lipoly batteries are designed from the ground up for serious performance. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than similar density lithium polymer (non-nano-tech) batteries.

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

TURNIGY nano-tech lithium polymer batteries are built with a LiCo nano-technology substrate complex greatly improving power transfer and making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non-nano-tech) battery.

Turnigy Nano-Techs has always been a leader of the pack. Now they are even better as the Nano-Tech Plus + batteries have been designed for those that want acute discharge from their batteries to give them leading performance with extra punch.

Turnigy Nano-Techs has always been a leader of the pack. Now they are even better as the Nano-Tech Plus + batteries have been designed for those that want acute discharge from their batteries to give them leading performance with extra punch.

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) batteries.

Typically reserved for high amp draw performance applications Turnigy Nano-Tech batteries represent the pinnacle of performance, reliability, and value for money. Taking these same manufacturing principles and technology, our engineers crafted a line of Lipoly batteries for those seeking dependability, quality, and life cycle. This particular battery is Losi Mini compatible and is supplied with a  JST-DS Losi 2-Pin connector.

More than just a fancy name. TURNIGY nano-tech Lipo batteries were designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short, less voltage sag and higher discharge rates than similar-density lithium polymer (non-nano-tech) batteries.

Specs:
Capacity: 1600mAh
Voltage: 2S1P/2 Cell/7.4V
Discharge: 20C Constant/40C Burst
Weight: 85g (including wire, plug & case)
Dimensions: 88x39x13mm
Balance Plug: JST-XH
Discharge Plug: 2-pin JST

Typically reserved for high amp draw performance applications Turnigy Nano-Tech batteries represent the pinnacle of performance, reliability, and value for money. Taking these same manufacturing principles and technology, our engineers crafted a line of transmitter/receiver-specific LiFePo4 batteries for those seeking dependability, quality, and life cycle unequaled by any other battery on the market today. When quality counts go with the world's most trusted battery.

Turnigy Nano-Tech LiFePo4 batteries (lithium-ion-derived chemistry) utilize lithium iron phosphate as a cathode material. This offers an exceptionally long cycle life and greater thermal/chemical stability when compared to a standard LiPo battery.

More than just a fancy name. TURNIGY Nano-Tech LiPo batteries were designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and higher discharge rates than similar density lithium polymer (non-Nano-Tech) batteries.

For those who love graphs, it means higher voltage under load, straighter discharge curves, and excellent performance. For pilots, it spells stronger throttle punches and unreal straight-up performance, excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings, and graphs can be fudged. Rest assured, TURNIGY Nano-Techs is the real deal, delivering unparalleled performance!

More than just a fancy name. TURNIGY Nano-Tech LiPo batteries were designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and higher discharge rates than similar density lithium polymer (non-Nano-Tech) batteries.

For those who love graphs, it means higher voltage under load, straighter discharge curves, and excellent performance. For pilots, it spells stronger throttle punches and unreal straight-up performance, excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings, and graphs can be fudged. Rest assured, TURNIGY Nano-Techs is the real deal, delivering unparalleled performance!

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

This Turnigy Nano-Tech 2S 350mAh battery is the perfect battery pack for the FMS range of 1/24th RC crawlers, it can also be used in the 1/18th, but it will give a shorter run time. It is lightweight (only 20g) and is supplied with a Molex 2P connector, so it is compatible with most other small crawlers as well.