Batteries / Chargers

MPX Connector to T-Connector Battery Adapter Lead(2pcs)

This adapter will convert a MPX Connector equipped battery to a T-Connector for use with an T-Connector equipped ESC or an T-Connector Charge lead.

2mm Gold connectors with cut away for easy soldering

Package contains 10 PAIRS of connectors. (20pc)

Spec.
Length: 12.5mm(Each)
Diameter: 2mm
Weight: 0.4g(Pair)

XT90 Battery Harness 10AWG for 2 Packs in Series

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT90 Battery Harness 10AWG for 2 Packs in Parallel

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

More than just a fancy name. Turnigy nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.

The Turnigy BoltX series of high voltage lithium polymer batteries are here and ready to bring out the next level of power to your high-performance model. Turnigy Bolt batteries are built to the absolute highest standards to provide competition-level performance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!

Turnigy Nano-Tech has always been a leader of the pack. Now they are even better as the Nano-Tech Plus. The Plus batteries have been designed for those that want acute discharge from their batteries for leading performance with extra punch.

4mm Gold Connectors - Low Profile (10pc)

Ideal for use with Hardcase packs for RC cars these plugs will allow you to fit your battery in the tightes of battery compartments.

Low Profile Bullect Connectors are preferred by racers world wide.

Pro Tip: If you find the bullets hard to plug in to your battery take a set of needle nose pliers and gently squeeze two of the four prongs, turn the plug and repeat on the other two prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

The Turnigy BoltX series of high voltage lithium polymer batteries are here and ready to bring out the next level of power to your high-performance model. Turnigy Bolt batteries are built to the absolute highest standards to provide competition-level performance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!

Power your compatible electrical items with the 4mm HXT to DC jack converter. The DC Jack converter has two 2mm jack plug connectors (positive centres) and is ideal for powering chargers or similar electrical items.

Specs:
Length: 210mm
DC Jack: 2mm
Battery Connector: 4mm HXT

2.1mm PCB Mounted DC Power Socket (5pcs)

Specs:
Internal Pin Diameter: 2.1mm
External Socket Diameter: 5.5mm
Length: 14mm
Height: 11mm
Width: 9mm
Max Rating: 1amp @ 12v
Quantity: 5pcs

2.5mm PCB Mounted DC Power Socket (5pcs)

Specs:
Internal Pin Diameter: 2.5mm
External Socket Diameter: 5.5mm
Length: 14mm
Height: 11mm
Width: 9mm
Max Rating: 1amp @ 12v
Quantity: 5pcs

HobbyKing has pushed the boundaries of RC power—from the legendary Blue series to the durable, low-IR of Graphene, and the relentless, hard-hitting delivery of the Rapid.

Now, it’s time to ascend to the absolute peak of RC performance. Welcome to APEX.

Engineered specifically for the brutal demands of modern FPV drone racing, freestyle, and high-speed RC flight, the APEX series introduces a boxy, near-square cell architecture. Designed to sit perfectly under FPV frames or aircraft fuselages, APEX optimizes your center of gravity while maximizing power density.

At the heart of APEX is a pure Cobalt formulation paired with Z-Fold structure. This eliminates the internal resistance bottlenecks found in traditional rolled cells, delivering 180C discharge rate. The APEX maintain rock-solid voltage stability when you punch the throttle hard.

Available in versatile capacities from 1100mAh to 4000mAh and configurations spanning 4S to 8S, APEX is the definitive power source for pilots who refuse to compromise.

HobbyKing Turnigy Graphene Panther 4S 100C lipo battery features ultra-low resistance and stable discharge across 5–52°C. Built for long cycle life, it minimizes voltage sag for drones and EDF jets, a top pick among rc batteries.

2.1mm DC Power Plug to 2.1mm DC Power Socket Extension Lead (2pcs)

Specs:
Plug Internal Diameter: 2.1mm
Plug External Diameter: 5.5mm
Plug Length: 12mm
Socket Internal Pin: 2.1mm
Socket Internal Diameter: 5.5mm
Overall length: 1m
Max rating: 1amp @ 12V
Quantity: 2pcs

The Turnigy Graphene 1500mAh 2S 7.4V 100C LiPo Battery delivers high-discharge power, low internal resistance and stable output for demanding 2S RC applications. Its compact design and T plug make it ideal for compatible RC cars, planes, helicopters and other lightweight models.

2.5mm DC Power Plug to 2.5mm DC Power Socket Extension Lead (2pcs)

Specs:
Plug Internal Diameter: 2.5mm
Plug External Diameter: 5.5mm
Plug Length: 12mm
Socket Internal Pin: 2.5mm
Socket Internal Diameter: 5.5mm
Overall length: 1m
Max rating: 1amp @ 12V
Quantity: 2pcs

1.3mm DC Power Plug to 2.1mm DC Power Socket Adapter (2pcs)

Specs:
Plug Internal Diameter: 1.3mm
Plug External Diameter: 3.5mm
Plug Length: 10mm
Socket Internal Pin: 2.1mm
Socket Internal Diameter: 5.5mm
Overall length: 160mm
Max rating: 1amp @ 12V
Quantity: 2pcs

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Spec.
Capacity: 1200mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 99g (including wire, plug & case)
Dimensions: 125x6x21mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
 
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology

*The length of balance charging wire may vary

1.3mm DC Power Plug with 15cm Lead (2pcs)

Specs:
Internal Diameter: 1.3mm
External Diameter: 3.5mm
Plug Length: 10mm
Overall length: 35mm
Wire: Red/Black 150mm
Max rating: 1amp @ 12V
Quantity: 2pcs

The popular T style plug and socket has been improved with the addition of clip-on insulating caps. These caps replace the need for heatshrink tubing and will accommodate up to 10awg wire.

Ideal for making a neat job of a charging station etc.

Features:
• Male/Female XT60 connector
• Panel mounting bracket
• Neat XT60 protective cover
• Mounting screw set.

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

LED battery voltage indicator for recievers powered by conventional NiCD or NiMh batteries. Features sticky foam backing for vibration isolation. This voltage indicator can be switched between 4.8V and 6.0V receiver pack applications. This ultra light weight, compact, and simple device is great to assess your battery pack condition at a quick glance. Simple green, yellow, or red indicators give you a confusion free answer to the question of "do I have enough battery left?"

Specs:
Dimensions: 40mm x 20mm x 4.7mm
Weight (including lead): 4g
Plug: Universal RX

Mount this handy device somewhere on your model where it can be seen clearly and plug it into a spare channel on your receiver, if no channel is available then use a Y lead. This unit will give you a visual check of your LiPoly or LiFe receiver battery each time you switch on. The easy to read series of LED's will show you whether it is safe to carry on or if the battery requires charging.

Specs:
Voltage Range: 6.6~7.4V
Dimensions: 40x21x2.5mm
Weight: 4g
Lead Length: 320mm
Plug: JR type

Turnigy batteries are known the world over for performance, reliability, and price. It’s no surprise to us that Turnigy Lipoly packs are to go-to pack for those in the know. Turnigy batteries deliver full capacity and performance at a price everyone can afford.

You won't find a better deal on lipoly batteries anywhere!

Spec.
Minimum Capacity: 1000mAh
Configuration: 1S / 3.7v / 1Cell
Constant Discharge: 20C
Cell Weight: 24g
Cell Size: 67 x 34 x 6mm

WARNING: Soldering Lipoly Cells takes a degree of skill and experience. Do not attempt to solder your own packs if you are not confident in your soldering abilities. No Warranty is implied or given once you have soldered the cell tabs. Please check cells for warranty purposes prior to soldering.

Turnigy batteries are known the world over for performance, reliability, and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.   

Turnigy batteries are equipped with heavy-duty discharge leads to minimize resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold-plated connectors and JST-XH style balance connectors. All Turnigy Lipoly battery packs are assembled using IR-matched cells. 

Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.  

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells.

You won’t find a better deal in Lipoly batteries anywhere!

Spec.
Minimum Capacity: 1000mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 30C
Peak Discharge (10sec): 40C
Pack Weight: 70g
Pack Size: 73 x 34 x 15mm
Charge Plug: JST-XH
Discharge plug: XT60

Designed specifically to suit the 1/18 Brushless 4WD Stadium Truck. 

Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.   

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells. 

You won’t find a better deal in Lipoly batteries anywhere! 

Spec.
Minimum Capacity: 1300mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 76g
Pack Size: 74 x 34 x 17mm
Charge Plug: JST-XH
Discharge plug: XT60 

Note: Suits the 1/18 Brushless 4WD Stadium Truck w/ 18Amp System 

Turnigy batteries are known the world over for performance, reliability, and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.  

Turnigy batteries are equipped with heavy-duty discharge leads to minimize resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with JST 2 pin and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells.

You won’t find a better deal in Lipoly batteries anywhere!