Batteries / Chargers

HXT3.5mm to XT60 Battery Adapter (2pcs/bag)

This adapter will convert a HXT3.5mm equipped battery to a XT60 for use with a XT60 equipped ESC or a XT60 Charge lead.

HXT4mm to EC3 Battery Adapter (2pcs/bag)

This adapter will convert a HXT4mm equipped battery to a EC3 Plug for use with a EC3 equipped ESC or a EC3 Charge lead.

A JST male plug to 2.54mm pitch male jumper lead for a variety of uses.

This lead is the best solution for batteries that are slightly out of balance; simply plug it into the individual cells on the balance lead, select a 1S charge rate and you can charge them one at a time to ensure they are all at optimum charge. 

Only use this method to restore cells that are slightly out of balance and remember that there could be something wrong with one of the cells so keep a close eye on it while charging.

Overall length: 70mm

JR to EH Adapter wire (2pcs/bag)

2mm Gold connectors with cut away for easy soldering

Package contains 10 PAIRS of connectors. (20pc)

Spec.
Length: 12.5mm(Each)
Diameter: 2mm
Weight: 0.4g(Pair)

XT90 Battery Harness 10AWG for 2 Packs in Series

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT90 Battery Harness 10AWG for 2 Packs in Parallel

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

4mm Gold Connectors - Low Profile (10pc)

Ideal for use with Hardcase packs for RC cars these plugs will allow you to fit your battery in the tightes of battery compartments.

Low Profile Bullect Connectors are preferred by racers world wide.

Pro Tip: If you find the bullets hard to plug in to your battery take a set of needle nose pliers and gently squeeze two of the four prongs, turn the plug and repeat on the other two prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

Power your compatible electrical items with the 4mm HXT to DC jack converter. The DC Jack converter has two 2mm jack plug connectors (positive centres) and is ideal for powering chargers or similar electrical items.

Specs:
Length: 210mm
DC Jack: 2mm
Battery Connector: 4mm HXT

Ideal for making a neat job of a charging station etc.

Features:
• Male/Female XT60 connector
• Panel mounting bracket
• Neat XT60 protective cover
• Mounting screw set.

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

LED battery voltage indicator for recievers powered by conventional NiCD or NiMh batteries. Features sticky foam backing for vibration isolation. This voltage indicator can be switched between 4.8V and 6.0V receiver pack applications. This ultra light weight, compact, and simple device is great to assess your battery pack condition at a quick glance. Simple green, yellow, or red indicators give you a confusion free answer to the question of "do I have enough battery left?"

Specs:
Dimensions: 40mm x 20mm x 4.7mm
Weight (including lead): 4g
Plug: Universal RX

Tired of being stuck with the basic USB charger for your TRX4M batteries? Well, we've got just the solution! This handy little charge lead converts your TRX4M battery plug to a JST and 2S balance plug for use with standard, hobby-grade battery chargers. Now you can not only charge with ease but also properly store your batteries by utilizing your charger's storage mode.

Tired of being stuck with the basic USB charger for your TRX4M batteries? Well, we've got just the solution! This handy little charge lead converts your TRX4M battery plug to an XT60 and 2S balance plug for use with standard, hobby-grade battery chargers. Now you can not only charge with ease but also properly store your batteries by utilizing your charger's storage mode.