Batteries / Chargers

A compact battery adapter to convert an EC3 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT60 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT90 battery lead to a TR output, compatible with similar types of connectors.

The ToolkitRC MC8 Advanced Multifunction Battery Checker is packed full of features and has a large color screen for complete battery status at a glance. This multifunctional checker can check the status of 1 cell, to 8-cell battery packs, has one-touch battery balancing, and can read output signals for PWM, PPM, or SBUS, as a receiver checker. The PWM output can also be used as a servo tester, and the MC8 can even fast charge your mobile devices via its USB-C 20W output port.

XT-60 Plug Harness for 2S Hardcase Saddle pack Lipoly Batteries

Discharge Plug: XT-60
Battery Plugs: 4mm Bullet Connetor
Balance Plug: JST-XH

Most standard 7S lithium polymer battery packs feature two balance ports, a 4S and 3S balance lead (total 7S). This makes it difficult to charge with most standard battery chargers that only feature one balance port.

With this super useful adapter you can easily charge your 7S battery with any standard 8~10S capable balance charger that accepts JST-XH balance plugs. This adapter takes the 4S and 3S individual plugs from your pack, and combines them to one single 7S balance plug which is able to connect to most standard 8~10S capable chargers.

Specs:
Input: 1 x 4S and 1 x 3S JST-XH balance plug
Output: 7S JST-XH balance plug
Length: 100mm

Most standard 6S lithium polymer battery packs feature two balance ports, 2 * 3S balance lead (total 6S). This makes it difficult to charge with most standard battery chargers that only feature one balance port.

With this super useful adapter you can easily charge your 6S battery with any standard 8~10S capable balance charger that accepts JST-XH balance plugs. This adapter takes the 2 * 3S individual plugs from your pack, and combines them to one single 6S balance plug which is able to connect to most standard 8~10S capable chargers.

Specs:
Input: 2 x 3S JST-XH balance plug
Output: 6S JST-XH balance plug
Length: 100mm

T-Connector Harness for 2 Packs in Parallel (1pc)

Spec:
Weight: 9.0g

XT60 Harness for 2 Packs in Parallel (1pc)

Spec:
Weight: 11.2g

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

This adapter will convert a T-Connector equipped battery to an XT60 for use with an XT60 equipped ESC or an XT60 Charge lead.

Flat style 'AAA' battery holder, holds 4 cells

HXT 4mm to T-Connector Battery Adapter Lead (2pc)

This adapter will convert an HXT 4mm equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 7g (Each)

This adapter will convert a 5.5mm Bullet Connector equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 9g(Each)

This adapter will convert a T-Connector equipped battery to an HXT 4mm for use with an HXT 4mm equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

This adapter will convert an HXT 4mm equipped battery to an XT60 for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

Finally, a simple solution to mis-matched plug types! This very neat, short one piece adapter is an easy way to convert your EC3 plug to XT60. Simply plug your model's EC3 plug on the ESC into the back of this adapter and you can then use batteries with XT60 plugs in your model, it's that easy!

We have designed these plug adapters in-house and paid for the molding. This allows us to keep costs low and they are exclusive to HobbyKing, meaning you will not find these XT60 plug adapters anywhere else!

The XT60 adapters are made from high-temp nylon and gold plated spring connectors, both are included in the injection molding process at the time when forming the connector.

This set includes:
2 x XT60 Male to EC3 Adapter Plug

T-Connector to EC5 Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a EC5 Plug for use with a EC5 equipped ESC or an EC5 Charge lead.

T-Connector to HXT4mm Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a HXT4mm for use with a HXT4mm equipped ESC or an HXT4mm Charge lead.

Mini Tamiya to T-Connector Battery Adapter (2pcs/bag)

This adapter will convert a Mini Tamiya equipped battery to a T-Connector for use with a T-Connector equipped ESC or a T-Connector Charge lead.

A simple way to connect two XT90 equipped battery packs in parallel.

Spec:
Dimensions: 48 x 22 x 22mm  
Weight: 25g (each)

A handy adapter to convert an XT90 equipped battery to a T connector. Useful for use with a T connecter equipped ESC or Charge lead.

Spec:
Weight: 11.6g(Each)

A handy adapter to convert a T plug equipped battery to an XT90 connector. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 10.6g(Each)

HXT 4mm bullet to XT90 Battery Adapter (2pcs)

This adapter will convert a 4mm bullet equipped battery to a XT90 for use with a XT90 equipped ESC or a XT90 Charge lead.

XT90 to 4.0mm bullet Battery Adapter (2pcs/bag)

This adapter will convert a XT90 equipped battery to a 4.0mm bullet for use with a 4.0mm bullet equipped ESC or a 4.0mm bullet Charge lead.

A handy adapter to convert an EC5 equipped battery to an XT90 connector. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 16.6g(Each)

A handy adapter to convert an XT90 equipped battery to an XT60 plug. Useful for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 12g(Each)

HXT3.5mm to XT60 Battery Adapter (2pcs/bag)

This adapter will convert a HXT3.5mm equipped battery to a XT60 for use with a XT60 equipped ESC or a XT60 Charge lead.

HXT4mm to EC3 Battery Adapter (2pcs/bag)

This adapter will convert a HXT4mm equipped battery to a EC3 Plug for use with a EC3 equipped ESC or a EC3 Charge lead.

A JST male plug to 2.54mm pitch male jumper lead for a variety of uses.

This lead is the best solution for batteries that are slightly out of balance; simply plug it into the individual cells on the balance lead, select a 1S charge rate and you can charge them one at a time to ensure they are all at optimum charge. 

Only use this method to restore cells that are slightly out of balance and remember that there could be something wrong with one of the cells so keep a close eye on it while charging.

Overall length: 70mm

JR to EH Adapter wire (2pcs/bag)

Protect your family and home from the hazards of LiPo charging. This LP-Guard bag is a fireproof bag designed to stop and contain fires caused by incorrectly or poorly functioning LiPos, especially during charging.

We urge all customers to always practice extreme caution when charging and never leave a charging LiPo battery unattended.

This is a small bag at 18x22cm that can fit three 2200mah 3S1P LiPo packs comfortably.

The LP-Guard is made from a fiberglass woven fabric, that is similar to fireproof suits worn by some firefighters.

Protect your family and home from the hazard of lipo charging.
This lipo-guard is a fireproof bag, designed to stop and contain the fire caused by incorrectly or poorly functioning lipos, especially during charging.

We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended.

This pack is the jumbo size. It is 25x33cm/10x13

The LP-Guard is made from a fibreglass woven fabric. Similar to fireproof suits worn by some firefighters.

2mm Gold connectors with cut away for easy soldering

Package contains 10 PAIRS of connectors. (20pc)

Spec.
Length: 12.5mm(Each)
Diameter: 2mm
Weight: 0.4g(Pair)

XT90 Battery Harness 10AWG for 2 Packs in Series

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT90 Battery Harness 10AWG for 2 Packs in Parallel

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."