Bargain Bin

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Black) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Black
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: Orange
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (White) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: White
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Green
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Orange
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Green
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Black) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Black
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Red) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Red
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Desert Fox Printed Body Panels Full Set (1 set)

Desert Fox Clear Body Full Set

Desert Fox Dirt Proof Cover (Clear) (1 set)

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

 The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

 The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Diff. Case - BSR 1/8 Rally

BT-4 Rear Suspension Arm Mount R2.0 TU1007

BT-4 Straight shaft (Spool) TU1042-2

Progressive Shock system for BT-4 gives a progressive dampening effect through the shock travel so the effect is softest at the start and harder at the end. Includes blank shock pistons so you can drill your own holes for precise tuning to your individual needs.

Specs:
Length: 14mm
Diameter: 11mm
Piston: 10mm x 2mm

Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)

Hobbyking™ Hardened Steel Pinion gears are the last pinion gears you will ever need to purchase. The Pinion gears are machined from a special steel alloy and are hardened for ultimate strength and durability. During the manufacturing process, extremely tight tolerances are maintained so the pitch of the gear is precise. This means Hobbyking™ Pinion gears run very quietly and efficiently.

As Brass or Aluminum gears wear, the interface between the pinion and spur gears degrade. The hardened Pinions are so tough that you can eliminate the need for spare gears in your toolbox. The Pinion gears are also strong enough to survive any insane power system that you choose to fit in your 3D helicopter.

Specs:
Pitch: 0.7M
Tooth Count: 12T
Fits Shaft Size: 6mm
Weight: 2.65g

Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)

Hardened Helicopter Pinion Gear 6mm/1.0M 16T (1PC)

These replacement drivers have been specifically designed to fit the Turnigy high quality drivers and drive sets (rubber handled type). The replacement shafts are manufactured from high tensile steel and are hard coated to prevent corrosion.

Specs:
Drive Type: Flat head screwdriver
Tip Size: 5mm
Shaft Diameter: 5mm
Shaft Length: 120mm
Weight: 17.06g

Looking for solid, high torque servos for your 1/5th scale car, truck or buggy? The Trackstar TS-500HD servos are just the ticket! The servos have a torque range of 27.3 - 32kg whilst still maintaining good operating speeds across its 4.8 - 7.4v input range. The servo's temperature is maintained by its beautifully machined heat sink housing which has a cool red anodized finish.

The Trackstar TS500HD servos are an excellent choice for everday bashing and can even handle the toughest of off-road tracks in almost any race conditions!

Servos are supplied complete with control horns and all necessary fixtures and fittings.
  
Specs:
Operating Voltage: 4.8 ~ 7.4v
Weight: 188g
Dimensions: 68 x 60 x 30 mm
Torque: 27.3kg (4.8v) 30.5kg (6.0v) 32kg (7.4v) 
Speed: 0.22sec/60deg (4.8v) 0.20sec/60deg (6.0v) 0.19 sec/60deg (7.4v)
Motor: Brushed DC motor 
Gear Train: Metal
Spline Count: 17

Turnigy TGY-AN13 analog car servo suitable for 1:8 & 1:10 scale cars with a tough, metal geartrain.

Supplied with a full hardware pack.

Specs:
Torque: 13.2kg/cm (4.8V)~14.5kg/cm (6.0V)
Speed: 0.15sec/60deg (4.8V)~0.13sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Analog
Gear Train: Metal
Plug: JR type
Size: 40 x 37.5 x 20mm
Weight: 58g
Spline Count: 25

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

This set consists of the lower front fuselage skid plate and the wing center section/belly skid plate for the Durafly EFX Racer series of airplanes.

Avios Yakovlev Yak-52 Military Scheme Replacement Propeller Blades.

A kit of plywood parts for the Durafly Tundra V1, V2, V3, and Night to build a mount/tray for your FPV equipment. The Tundra series is the perfect mount for FPV flying due to its stability and slow flying characteristics.

Durafly® ™ Tundra - Decal Set 

Replacement fuselage for the Durafly Supermarine Spitfire Mk1a & Mk2a 1100mm series.  Comes with magnets and plastic fittings but does not include cowl or battery hatch.