Bargain Bin

The Orange OpenLRS 433MHz TX Module is designed for use with APM flight control software and can be programmed to use your choice of protocol and any channel in the 433MHz range. Fully user-customizable, the transmitter system can even be programmed to utilize additional features such as telemetry, operative remote control via stics (cPPM ready), and mission control.
It is equipped with Bluetooth technology so the user can connect it to a tablet, smartphone, or PC. All telemetry data, mission planning, and flight modes will be available in APM Mission Planner on PC or Droid Planner, or similar apps for Android devices. Thanks to the Bluetooth function, no additional leads are required to setup/program the transmitter module.

The OrangeRx 6ch compact receiver has been designed for FPV racing drones with carbon frames. The extra-length antenna allows you to route them outside of the frame for extended range and a robust link to your transmitter.

OrangeRx receivers are built using original components, 32-bit MCUs, and with state of the art SMT automation to ensure a quality product each and every time. Every single receiver is manufactured using impedance-controlled PCBs with exact tuning to provide signal stability and range that exceeds any of the previous generation ORX products. In fact, our testing has shown that the R617XL exceeds the range of other receivers in the same class.

All R617XL OrangeRx receivers are QC tested using our latest method that ensures range checking takes place as the receiver is programmed. Simply put, if the R617XL cannot pass the range check it cannot be programmed, this ensures 100% of R617XLs are guaranteed to work flawlessly. The R617XL ushers in a new era of quality, reliability, and performance for the OrangeRx lineup.

The receiver features "True Diversity" technology, which is especially important for long-range flights and in situations where you need that more robust reception. This receiver is very useful where carbon is used in the construction of your model where the antenna can be in the shadow of the airframe. If one of the antennae cannot receive a signal due to its orientation then the satellite will use the other one to receive the commands from the transmitter.

There's a lot to be said for the simple things in life, and with RC equipment becoming ever more flexible it's a refreshing change to find a simple, 4 channel radio that dispenses with the need for programming before you can use it.

The Turnigy TGY-i4X AFHDS/2A does exactly that and is a great entry level 4-channel telemetry 2.4ghz transmitter that can be switched between 1st and 2nd generation Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology. The Turnigy TGY-i4X has a nice quality look and feel, while the programming is limited to one-switch V-tail/elevon mixing and servo reversing only. The transmitter is capable of being upgraded to up to 10 channels, see manual for details.

An ergonomically designed, ultra slim case design fits comfortably in your hands, an advantage during long flights. Digital trims and easy to read battery indicator LEDs give the TGY-i4X a modern feel with all the essential features you need. With a low profile antenna, the TGY-i4X is easy to transport and store. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers.

The TGY-i4X comes with the TGY-i4X 4-channel receiver and is a superb budget radio for both new and experienced pilots alike!

Features:
• Entry level 4 channel 2.4ghz radio
• One switch V-tail/elevon mixer
• Easy to use servo reversing switches
• Standard Wing/Elevon/V-Tail
• Trainer port
• Simple LED battery indicator
• 1-Button binding

Transmitter Specs:
Channels: 4 (Expandable to 10)
Frequency: 2.40~2.48GHz
Bandwidth: 500KHz
DSC Port: PS2
Output: PPM Charger
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142 RF
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 6V (4 x AA batteries)
Range: 100~300m
Dimensions: 174 x 89 x 190mm
Weight: 335g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Receiver Specs:
Channel: 4
Frequency: 2.40~2.48GHz
Power: 4.5V~6.6V/<30ma
Weight: 13g
Antenna length: 26mm
Dimensions: 45 x 23 x 9mm

Included:
Turnigy TGY-i4X transmitter
Turnigy TGY-i4X receiver
Bind plug
Manual

Requires:
4 x AA batteries

Instruction Manual is available under the "Files" tab.

The Turnigy TGY-iA6C is a new style in receivers. It builds on the reliability of the TGY-iA6B receiver but it is built specifically for using with PPM, i.BUS and S.BUS configurations. This is an excellent addition to your Turnigy TGY-i6s and TGY-i10 transmitters.

Dual antennas give the iA6C for unparalleled reception. Built-in connections allow you to use our optional telemetry sensors. 

An excellent receiver for multi-rotor drones as it cuts down on cabling and with built-in battery monitoring.

Features:
• Reliable, interference free 2.4GHz AFHDS 2A signal operation
• PPM, i.BUS, S.BUS
• Ultra-light weight design
• Dual antennas for most reliable interference free operation
• Connection ports for use with optional telemetry sensors
• Battery monitoring

Specs:
Channel: 8
Frequency: 2.4GHz ISM Frequency Range
Band width: 500KHz
Band quantity: 135
RF Power: <20dBM
System: AFHDS2A
Code type: GFSK
Output data: PPM, i.BUS, S.BUS
Antenna length: 26mm
Power: 4.0V~6.5V
Wireless Update: Yes
Channel data: Center position: 1500±30us; range: 1000~2000±30us
Channel delay: <15ms
Net Weight: 7.9g
Dimensions: 41x25x10mm
Range: >300 meters
Certification: CE0678, FCC ID: N4ZIA6C00, RCM

Aluminum alloy neck strap adjuster suitable for DJI transmitters or similar.

Futaba Trainer Cable (Buddy Box Cable) 2.8m

The Turnigy Voltage Protector helps prevent your receiver from dropping below its required operating voltage. This helps to eliminate "brownouts" and prevents your receiver from rebooting. It will also help reduce the load on your ESC's BEC and reduce the likelihood of glitching. Simply plug it into any spare channel on your receiver.

Operating Voltage : 3.2V - 11.1V (1s ~ 3s LiPo)
Capacitor voltage: 16v
Storage Capacity: 3300uf
Weight: 6.1g

The RMILEC Adapter Converter Board is the perfect solution to allow easy connection to an SBUS receiver. The T4363NB18 adapter supports 5V power supply and can be used not only for matching 12FG or 14MZ transmitters but can also be individually placed in another location as a relay station.

The board is supplied complete with hardware including, JST battery connectors, on/off switch, terminals, fixtures and fittings.

Please note: soldering of on/off switch and terminals is required.

Specs:
Material: PCB
Weight: 39.65g
Dimensions: 90 x 115mm