Bargain Bin

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Black) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Black
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: Orange
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (White) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: White
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Green
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Orange
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Green
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Black) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Black
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Red) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Red
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-locking and have an insert fitted to suit 5mm motor shafts.

Specs:
Length: 5inch
Pitch: 3 inch
Center Hole:5mm
Weight:  5.3g each
Rotation: Clockwise and counterclockwise

The MultiStar White edition multirotor propeller started as an optimized blade design for the target motor/RPM combinations in Multirotor use. After comparing a host of construction options, a wood core was selected for its super stiff property’s, light weight and vibration resistant properties.

The MultiStar White Edition Propellers come packaged in a set of two CW/CCW and matching mounting hardware and thrust washers. The high visibility White color adds safety and style to your multi-rotor setup.

Specs:
Size: 9.4X4.3
Mounting Style: Hub Style with CW/CCW shaft nuts included 

Included:
One CCW and one CW propeller
Mounting Hardware and thrust washer (DJI Style shaft nuts)

JST SM 2 Pins Plug (Male To Female) 
Soft, high strand Silicon Wire (10cm)
Male and Female included.

Aerostar Composite Propeller 13x4 Bone (CCW) (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

These propellers are beautifully finished and highly efficient

APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)

These propellers are beautifully finished and highly efficient

T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)

6 LED Strip RED

Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 5/32" (4.0mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up, so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.

Specs:
Size: 10-4.5
rotation: CW
Hub: slot (DJI) style, 8mm bottom Dia  7mm flat to flat and drop down to 6mm top hole

Included:
Two CW Props

Very well made and finished lightweight alloy oleo struts with offset and trailing link, they are sprung loaded and will accept a wheel of up to 76mm (3ins) diameter.

5.6mm x 18mm M3 Nylon Tapped Spacer (10pc).

Perfect for mounting Multi-rotor control boards.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2 x 4mm
Weight: 0.07g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2 x 6mm
Weight: 0.07g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 4mm
Weight: 0.10g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 8mm
Weight: 0.18g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.50g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 12mm
Weight: 0.65g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2 x 4mm
Weight: 0.11g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 4mm
Weight: 0.18g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 6mm
Weight: 0.21g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.81g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 8mm
Weight: 0.20g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.55g(Each)

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set includes the separator tool. Additional adapter sets for T-plugs are available here

Also available for XT-60

Specs:
Plug Type: T-Plug
Qty: 20
Weight: 0.9g (pair)