Bargain Bin

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
8x6: 322W, 31A, 1459g static thrust
9x4.7: 376W, 36A, 1549g static thrust
9x5: 392W, 38A, 1624g static thrust

Performance Data (4S):
7x6: 463W, 33A, 1789g static thrust
8x3.8: 490W, 35A, 1668g static thrust
8x4.5: 551W, 40A, 1909g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (3S):
9x7.5: 400W, 39A, 1880g static thrust
10x6: 453W, 45A, 1950g static thrust
11x5.5: 538W, 54A, 2163g static thrust

Performance Data (4S):
8x6: 520W, 38A, 2016g static thrust
9x4.5: 588W, 43A, 2064g static thrust
10x3.8: 689W, 51A, 2235g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (10S):
15x10: 1350W, 38A, 5773g static thrust
16x10: 1658W, 47A, 6798g static thrust
17x10: 2000W, 57A, 7876g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (10S):
18x8: 1630W, 46A, 6330g static thrust
19x8: 1923W, 54A, 7231g static thrust
20x8: 2240W, 64A, 8162g static thrust

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

A replacement pair of wings with flaps and ailerons for the grey XFLY Alpha Jet.

A replacement pair of wings with flaps and ailerons for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the grey XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the grey XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement gun pod for the grey XFLY Alpha Jet.

A replacement set of wheels for the XFLY Alpha Jet (3pcs).

A replacement front oleo strut with wheel for the XFLY Alpha Jet.

A replacement oleo strut with wheel and left side gear door for the grey XFLY Alpha Jet.

A replacement oleo strut with wheel and left side gear door for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement oleo strut with wheel and right side gear door for the grey XFLY Alpha Jet.

A replacement multi-connector system for the XFLY Alpha Jet (2pcs).

A replacement fuselage for the 750mm XFLY T-7A Red Hawk.

A replacement pair of vertical stabilizers for the 750mm XFLY T-7A Red Hawk (2pcs).

A replacement set of main and nose wheel landing gear with wheels for the 750mm XFLY T-7A Red Hawk.

A replacement pair of horizontal stabilizers with rotating shafts for the 975mm XFLY T-7A Red Hawk (2pcs).

A replacement set of missiles and drop tank for the 975mm XFLY T-7A Red Hawk (7pcs).

A replacement set of wheels for the 975mm XFLY T-7A Red Hawk (3pcs).

Replacement multi-function control board for the 975mm XFLY T-7A Red Hawk.

A replacement nose gear servoless retract unit for the 975mm XFLY T-7A Red Hawk.

A replacement horizontal stabilizer with elevator for the XFLY Swift 2100mm Sport Glider.

This optional EDF nacelle unit will convert your XFLY Swift 2100 into an EDF-powered sport glider. The unit includes the XFLY Galaxy 64mm 12-blade fan, and the powerful XFLY 2840-3200KV brushless motor to give your Swift on a 4S battery an incredible performance. Installation is very straightforward, once installed you will only need to remove the prop and fit the supplied nose cone.

Specs:
Type: XFLY Swift 2100 Sport Glider Optional EDF Unit
Fan: 64mm 12-blade
Motor: 2840-3200KV brushless
Thrust: 1250g
Recommended Battery: 14.8V (4S) 2200~3300mAh LiPo (not supplied)

A replacement wing set with ailerons for the red and white XFLY 850mm Partenavia P68 Twin.

A replacement fuselage for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.