Bargain Bin

This is a replacement pre-painted canopy and battery hatch for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted canopy and battery hatch for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Red Reno Racer.

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Commemorative Russian WW2 Warbird.

Want even more speed and power for your H-King Reno Aces Racer? Then upgrade to this optional high-power Pro 3108-1160KV brushless and turn it into a ballistic missile with unlimited vertical performance. There is no need to change the supplied propeller or ESC, both are fine with this upgrade.

A replacement crankshaft set for the Turnigy TP10 10cc gas engine. This set includes the crankshaft, conrod, prop-driver woodruff key, and prop nut.

A replacement crankcase set for the Turnigy TP10 10cc gas engine, this set includes the crankcase, gasket, and 2 x screws.

A replacement crankcase for the Turnigy TP26 26cc gas engine.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement pair of horizontal stabilizers with elevators for the H-King F-16 Fighting Falcon 550mm.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-16 Fighting Falcon 550mm.

A replacement canopy and battery hatch for the H-King F-18 Super Hornet 588mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

Model: TGY-1501MG
Voltage: 4.8~6.0v
Speed: 0.16~0.14sec
Torque: 15.5~17.0kg/cm
Weight: 60g
Size: 40.7x20.5x39.5mm
Spline Count: 25

Alloy Oleo Set Twin Nosewheel/Stirrup Mains for 90mm EDF/1.20 Class 3pc - Superb looking and high quality Oleo leg's for Warbirds and scale models & Jet's, complete with axles, wheel spacers and steel mounting pins.

Specs:
Length to axle centreline Mains: 125mm (not inc pin)
Length to axle centreline Noseleg: 115mm (not inc pin)
Retract Mounting Pin: 5mm
Axle: 4mm
Maximum Wheel Diameter Main: 70mm (20mm Wide)
Weight: 138g

Phantom FPV Flying Wing 1550mm - Replacement Motor Cover

The Pro Mini is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or breakout board to provide USB power and communication to the board.
 
The Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

Mini USB Adapter (included):
This board converts a USB connection into 5 volt TX and RX signals that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI (drivers are included with the Arduino software).

Features:
• ATmega328 running at 8MHz with external resonator (0.5% tolerance)
• USB connection off board
• Supports auto-reset
• 3.3V regulator
• Max 150mA output
• Over current protected
• Reverse polarity protected
• DC input 3.3V up to 12V
• On board Power and Status LEDs

Specs:
Operating Voltage: 3.3V
Input Voltage: 3.35 -12V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40mA
Flash Memory: 16KB (of which 2 KB used by bootloader)
SRAM: 1KB
EEPROM: 512 bytes
Clock Speed:  8MHz
Dimensions: 18x33mm
Weight: 2.3g

Includes:
1 x Pro Mini Microcontroller
1 x Mini USB Adapter

*Note: This is not an original Arduino brand product.

Arduino 10DOF with ITG-3205, ADXL345, HMC5883L, and BMP085

*Note: This is not an original Arduino brand product.

A good quality, strong, easy-to-use, iron-on plastic film covering with good shrinking properties that is suitable for most RC model airplanes.

Specs:
Material: Plastic film
Color: Small red/white chequered pattern
Adhesive: Heat-activated
Width: 638mm
Quantity: 5 meters

Please note: Parcel weight includes special tube packaging.

UltraDetail Scale Cockpit - Viperjet 90.

Specs:
Width: 105mm
Length: 353mm
Heigth: 70mm

Quanum Skull Crusher 2WD - Drive Shaft/CVJ

A2032 and A2033 33434 CVD

The ImmersionRC 5v - 12v Step Up Converter provides power to drive 12v cameras from the 5v outputs of ImmersionRC's A/V transmitters.

The highly efficient step-up regulator, has almost zero RF emissions and with a 250mA maximum output current, the converter can power most of the commonly used FPV cameras. The step up converter is super lightweight and compact weighing in at just 2g.

Features:
• Converts 5V to 12v to power a multitude of FPV cameras
• 90% efficiency
• Super lightweight and compact (the size of a regular postage stamp)
• Minimal RF emissions

Specs:
Weight: 2g
Dimensions: 28 x 13 x 3mm
Material: PCB

GWS EP Propeller (RD-1410 356x254mm)

DD:Direct Drive (fast spinning) -Straight Edge
RD:Reduction Drive (Slow Fly, Outrunner or Gearbox) - Curved Edge

Turnigy 3D Gas wood propeller 24x10.

Specs.
Prop Size: 24x10
Shaft Size: 10mm

Turnigy 3D Gas wood propeller 25x10.

Specs.
Prop Size:25x10
Shaft Size: 10mm

XT150s are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 75mm
Overall length: 68mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 43g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 82mm
Overall length: 75mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 49g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 82mm
Overall length: 75mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 49g

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (2S):
5.25x5.5: 48W, 6.7A, 323g static thrust
5.5x6.5: 62W, 8.5A, 412g static thrust
6x6: 74W, 10A, 466g static thrust

Performance Data (3S):
4.1x4.1: 58W, 5A, 284g static thrust
4.5x4.1: 74W, 7A, 363g static thrust
5x4.1: 100W, 9.5A, 472g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):
9x6: 66W, 9.2A, 487g static thrust
10x4.7: 73W, 10.3A, 492g static thrust
11x4.7: 90W, 12.8A, 563g static thrust

Performance Data (3S):
7x6: 97W, 9A, 602g static thrust
8x4.5: 114W, 10.7A, 633g static thrust
8x6: 137W, 12.9A, 774g static thrust