Bargain Bin

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3660-4500KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 3T, 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

An ACE RC Ripper 3720-1100KV brushless motor with prop shaft to upgrade your  H-King MX2 Extreme 30E.

UltraDetail Scale Cockpit - Viperjet 90.

Specs:
Width: 105mm
Length: 353mm
Heigth: 70mm

Quanum Skull Crusher 2WD - Drive Shaft/CVJ

A2032 and A2033 33434 CVD

The ImmersionRC 5v - 12v Step Up Converter provides power to drive 12v cameras from the 5v outputs of ImmersionRC's A/V transmitters.

The highly efficient step-up regulator, has almost zero RF emissions and with a 250mA maximum output current, the converter can power most of the commonly used FPV cameras. The step up converter is super lightweight and compact weighing in at just 2g.

Features:
• Converts 5V to 12v to power a multitude of FPV cameras
• 90% efficiency
• Super lightweight and compact (the size of a regular postage stamp)
• Minimal RF emissions

Specs:
Weight: 2g
Dimensions: 28 x 13 x 3mm
Material: PCB

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Each cell is hand-picked and matched for the ultimate in quality to deliver the power, durability and run time needed for the high performance models of today. Each pack is checked and tested at each stage of assembly to guarantee the highest possible quality. This careful matching and checking process allows the packs to achieve a mind boggling discharge rate of up to 140C. If you're the discerning racer or hardcore basher that needs to squeeze every last drop of performance out of your batteries, this is the pack for you!

Replacement fuselage for the Durafly Goblin Racer in Yellow/Black/Silver.

Replacement tailplane and elevator for the Durafly Goblin Racer in Yellow/Black/Silver.

Replacement fuselage for the Durafly Goblin Racer in Pink/Blue/Black.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Drive Shaft Support Set.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement CNC Aluminum Rudder Assembly w/Plastic Mounting Bracket.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Stainless Steel Turn Fins w/Mounting Set.

A replacement fuselage with canopy for the Volantex Ranger 1600, and Ranger 2000 electric gliders.

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

P-51D Shangri La - Replacement Horizontal Tail

HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)

Super Kinetic - Replacement Brushless Motor (2630-KV1000)

HobbyKing™ Wingnetic 805mm - Replacement Fuselage

YEP ESC series offers a super smooth linear throttle responce making them exceptional fixed wing and helicopter ESCs.  The features offered in this ESC are only matched by the most expensive european brands at a fraction of the cost. The super smooth soft start, along with its ultra high resolution throttle response puts this ESC in a class of its own!

Desert Fox Printed Body Panels Full Set (1 set)

Desert Fox Dirt Proof Cover (Clear) (1 set)

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

 The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

 The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Looking for solid, high torque servos for your 1/5th scale car, truck or buggy? The Trackstar TS-500HD servos are just the ticket! The servos have a torque range of 27.3 - 32kg whilst still maintaining good operating speeds across its 4.8 - 7.4v input range. The servo's temperature is maintained by its beautifully machined heat sink housing which has a cool red anodized finish.

The Trackstar TS500HD servos are an excellent choice for everday bashing and can even handle the toughest of off-road tracks in almost any race conditions!

Servos are supplied complete with control horns and all necessary fixtures and fittings.
  
Specs:
Operating Voltage: 4.8 ~ 7.4v
Weight: 188g
Dimensions: 68 x 60 x 30 mm
Torque: 27.3kg (4.8v) 30.5kg (6.0v) 32kg (7.4v) 
Speed: 0.22sec/60deg (4.8v) 0.20sec/60deg (6.0v) 0.19 sec/60deg (7.4v)
Motor: Brushed DC motor 
Gear Train: Metal
Spline Count: 17

Durafly® ™ Tundra - Decal Set 

Replacement fuselage for the Durafly Supermarine Spitfire Mk1a & Mk2a 1100mm series.  Comes with magnets and plastic fittings but does not include cowl or battery hatch. 

Replacement Durafly™ Spitfire Mk1a & Mk2a Main Wing, comes with control horns installed.

Please note:  No servos or extension leads are supplied with the replacement wing.

Option Alu. Steering Knuckle Arms - Basher PBull 1/18 4WD Desert Buggy (2pcs)

The QE58-2 is a great micro 5.8GHz selectable 25mW ~ 200mW video transmitter. Small enough to fit on most multi-rotors but can also be used on other platforms.

This QE58-2 transmits a full range of 40 channels, weighs less than 17g (with supplied antenna) and incorporates a 5V power output for video cameras. Great for all FPV conditions. 

Selectable 200mW feature is activated by snipping the jumper wire in the bottom right hand corner of the VTX board.

Features:
• Micro sized and lightweight (7.5g)
• Easy install, plug and play
• Push button control instead of switch to change channels
• Selectable 25mW's ~ 200mW's (23dBm, +/-1dBm) of clean output power
• 5V Output for camera
• 40 Channels
• Microphone

Specs:
Modulate: Wideband FM
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Transmitter power: 25 ~ 200mW (23dBm, +/-1dBm)
Frequency range: 5645-5945MHz
Operating Voltage: 7~20V (2S~5S LiPoly)
Input current: 200mA
Output Voltage: 5V
Operating Temperature: -10~85deg C
Video Band Width: 0~8MHz
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0Vp-p
Audio Input Impedance: 10K Ohm
Weight: 7.5g
Antenna Connector: SMA Female
Size (LxW): 31x22mm (excluding antenna)

Included:
1 x Quanum ELITE QE58-2 5.8GHz Selectable 25mW ~ 200mW Wireless AV Transmitter
1 x SMA antenna
1 x Power in and video cable

Channels:
Band A: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
Band B: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band C: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band D: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917
Band E: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866

Aluminum Rear Lower Suspension Arm (2Pcs/Bag) - A2003T, A2027, A2029, A2035 and A3007

Spare Part - RC Adapter Multiplex for Scherrer Rx700LR Long Range UHF System

Rx700NR is a small and very light weight receiver with 9 channels that has a range of up to 20km! It also has an optimized input filter which will prevent interference from strong 2.4 GHz video systems.

The Rx700NR will work with any Scherrer long range transmitter and will provide you with a solid and safe signal for your flights. The antenna is mounted directly on the board and with a total weight of only 8 grams this receiver is perfect for UAVs where the focus is on weight and longer flight times.

Features:
• Up to 20km range
• External firmware upgrade port
• Running LED
• Completely new software
• Selectable PPM/PWM
• Sequential failsafe

Specs:
Board Dimensions: 26 x 53mm
Weight: 8g
Number of channels: 9
Output: PPM output 
Rssi output: 0.5 to 3.3V from min to mix
Supply voltage: 4 -10 V
Supply current RX: 18mA at 5V
System: Wideband frequency hopping 
Band: 433 and 440 MHz 
User firmware upgradeable: Yes
Wide user temperature range: -40C to +70C ambient

The Turnigy MX series of servos are reknown for their quality and reliability. Each servo is supplied with mounting screws, grommets and a variety of servo arms.

Specs:
Voltage: 4.8~6V
Torque: 2.5~3.0kg/cm
Speed: 0.14~0.12sec/60°
Weight: 17g
Dimensions: 28.2x12.8x27mm
Gears: Plastic
Bearings: Single BB
Motor: Cored
Type: Digital
Servo Plug: JR type
Servo Lead Length: 260mm