Bargain Bin

Replacement elevator pushrod for your H-King Skipper All Terrain 700mm airplane (2pcs).

Replacement rudder pushrod for your H-King Skipper All Terrain 700mm airplane (2pcs).

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement aluminum alloy rudder support set for the Aquaholic V3 brushless racing boat.

A replacement coupler for connecting the motor to the 4mm flexi-shaft that will fit either the Aquaholic V2 or the V3 brushless racing boat.

A replacement pair of control horns for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement set of 16 screws for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement linkage set with ballinks for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm (4pcs).

Turnigy Slowfly Propeller 7x3.8 Pusher Black (4pcs).

A replacement short 5mm flexi-shaft for the 2024 version of the HydroPro Inception. Please see the attached pictures for the version that this suits.

A replacement screw set for the XFLY Alpha Jet (12pcs).

A replacement set of control horns for the grey XFLY Alpha Jet (5pcs).

A replacement set of control horns for the blue "Patrouille de France" XFLY Alpha Jet (5pcs).

A replacement set of linkages for the 750mm XFLY T-7A Red Hawk (4pcs).

A replacement set of control horns for the 975mm XFLY T-7A Red Hawk (4pcs).

A replacement pair of winglets for the green/white XFLY Eagle Twin 40mm EDF Flying Wing Racing Jet.

A replacement set of 4 linkages for the 750mm XFLY Sukhoi Su-27 Flanker.

A replacement set of 8 screws for the 750mm XFLY Sukhoi Su-27 Flanker.

TF Model ESC and LED lighting power distribution board suitable for most quads and multi-rotors including SMACK TF250, OrcaTF280, TF650, TF680 and TF690.  A 3 position control channel can be setup to change the LED from Solid, Slow blinking and fast blinking LED lights.

Specs:
Dimensions: 50 x 50mm
Weight: 14g
ESC Output : 6
5V Output : 1
12V Output : 1
Mounting Holes : 45mm

Prop Nut/Spinner 22mm Alloy 3/8"-24

Prop Nut/Spinner 22mm Alloy M7x1.00 Anodised Black

Prop Nut/Spinner 22mm Alloy M10x1.00 Anodised Black

Hex spinner prop nut Alloy M7x1.0

This is the carbon fiber main frame base plate for the HK-550GT helicopter.

Excellent double sided tape for outdoor use. This tape is strong and padded.

Great for using on applications that need a bit of padding such as mounting receivers, flight controllers or ESCs. 

Specs:
Width: 20mm
Length: 1500mm

HXT 4mm Connector to T-plug conversion charge lead

This will connect to a Lipo fitted with HXT 4mm connectors and a charge lead fitted with a T-plug

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

The KK2, the shining light for those that want to fly multirotors but don’t want to learn a programming language or sell a kidney to afford it. This is one of those great shirts that the image where to the untrained eye it is just a circuit board unless you stumble a crossed a fellow rotor-head, to which you will most likely get the nod of approval.

Size: MEDIUM

*Note: Other sizes available

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

The KK2, the shining light for those that want to fly multirotors but don’t want to learn a programming language or sell a kidney to afford it. This is one of those great shirts that the image where to the untrained eye it is just a circuit board unless you stumble a crossed a fellow rotor-head, to which you will most likely get the nod of approval.

Size: XL

*Note: Other sizes available

Polyester Hook and Loop Peel-n-stick (Black) (1 Meter)

Volantex 759-8 Phoenix 2000 - Propeller Blades.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Tamiya premium quality, clog free, wet and dry sanding paper. Ideal for modelers looking for the perfect finish. The pack contains 2 x P180, 1 x P240, 2 x P320. 

Specs:
Grades: P180, P240, P320
Dimensions: 229 x 93mm
Quantity: 5 pcs