Bargain Bin

Durafly™ SkyMule 1500mm - Bottom Servo Hatch

HobbyKing™ Bix3 Trainer 1550mm - Replacement Wing Bolts

2 Pieces Included

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 38mm White - Mount hole 6mm

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 70mm Yellow - Mount hole 8mm

This extendable magnetic pick-up tool is a great addition to any toolbox, it makes picking up small metal parts that fall in hard to reach places extremely easy.

Specs:
Magnet Diameter: 7mm
Extended Length: 635mm
Magnet Strength: 1.5kg lift capacity

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Diff. Case - BSR 1/8 Rally

Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)

Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)

Hardened Helicopter Pinion Gear 6mm/1.0M 16T (1PC)

These replacement drivers have been specifically designed to fit the Turnigy high quality drivers and drive sets (rubber handled type). The replacement shafts are manufactured from high tensile steel and are hard coated to prevent corrosion.

Specs:
Drive Type: Flat head screwdriver
Tip Size: 5mm
Shaft Diameter: 5mm
Shaft Length: 120mm
Weight: 17.06g

A kit of plywood parts for the Durafly Tundra V1, V2, V3, and Night to build a mount/tray for your FPV equipment. The Tundra series is the perfect mount for FPV flying due to its stability and slow flying characteristics.

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

Possibly one of the hottest debates in recent R/C history...balsa or foam? This is the shirt all of you balsa bandits have been waiting for. Slap your foamy friends across the face and tell them to read this.

Size: Large

*Note: Other sizes available

TrackStar TS3t Temperature Sensor for Electric Car/Boat

Specs:
Lenght: 390mm
Plug: JR plug

Spice up your Turnigy ActionCAm with these high quality original replacement faceplates in a wide variety of colors. Swapping out these faceplates is a breeze, simply pop off the original and snap on the new. With these optional faceplates you can easily make your Turnigy ActionCam match your favorite color, your model or even your outfit!

Spec.:
Color: Bronze

TrackStar Shock End Caps 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Suspension Spring Retainer 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Big Bore Suspension Spring Retainer 13mm (4) S124103

Compatible with the following Shock Absorbers
S124300, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:55mm
Spring Rate:  1.8Kg
Color: Red

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:55mm
Spring Rate:  1.5Kg
Color: Silver

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length: 65mm
Spring Rate:  2.1Kg
Color: Red

Compatible with the following Shock Absorbers
S160085, S160100

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:65mm
Spring Rate:  1.5Kg
Color: Gold

Compatible with the following Shock Absorbers
S160085, S160100

The Quanum Elite X50-2 transmitter packs 200mW of ultra clean 5.8GHz power for your FPV kit! This is a must have Tx for those who are looking for longer range.

The X50 transmits on the full range of 40 channels and has an easy to use channel switching system.

The unit comes in a unique metal alloy case that is not only damage resistant but also acts as a heat sink.  The case also has fixing points so that the unit can be bolted to your model making it far more secure.

A key feature of this system is the R Band also known as race band, which is 37mhz apart from the next channel, all 8 sub-channels in R Band will not interfere with each other, this is great news for FPV racers. 

Features:
• Bulit-in microphone 
• Super mini, light weight only 12.5g 
• Five bands 40 channels with R-Band 
• Elegant design with CNC aluminum case 
• One switching button for band and channel selection
• Vertical antenna connection

Specs: 
Video format: NTSC/PAL 
Antenna connector: SMA female connector (Vertical)
Power input: 7-20V (3S LiPo battery suggested) 
Power output: 5V 
Output impedance: 50 Ohm 
Transmitting power: 200mW 
Frequency range: 5645-5945Mhz 
Working current: 200mA at 12V 
Video bandwidth: 8Mhz 
Audio carrier frequency: 6.5Mz 
Audio input impedance: 10K Ohm 
Dimensions: 32x24x9.4mm
Weight: 12.5 grams

Frequency Range:
FRA: 5740MHz, 5760MHz, 5780MHz, 5800MHz, 5820MHz, 5840MHz, 5860MHz, 5880MHz 
FRB: 5705MHz, 5685MHz, 5665MHz, 5645MHz, 5885MHz, 5905MHz, 5925MHz, 5945MHz 
FRC: 5865MHz, 5845MHz, 5825MHz, 5805MHz, 5785MHz, 5765MHz, 5745MHz, 5725MHz 
FRD: 5658MHz, 5695MHz, 5732MHz, 5769MHz, 5806MHz, 5843MHz, 5880MHz, 5917MHz 
FRE: 5733MHz, 5752MHz, 5771MHz, 5790MHz, 5809MHz, 5828MHz, 5847MHz, 5866MHz  

Includes:
Quanum Elite X50-2  5.8GHz 40CH 200mW Wireless AV Transmitter 
Antenna 
Cable 
Manual

Battery Support/Bumper Bracket F/R - A2023T, A2027, A2029 and A2035

JST SM 2 Pins Plug (Male To Female) 
Soft, high strand Silicon Wire (10cm)
Male and Female included.

Perfect for snorkeling, diving, surfing or any other water based activity where you want to use your Gopro Hero 4 Session to capture the action.  

Made of clear heavy duty plastic, the housing has been designed to allow funtional control of the camera and comes with a heavy duty rubber seal that provides the housing with a depth rating of 40 metres.

Specs:
Material: Heavy duty clear plastic
Weight: 55g
Dimensions: 48 x 48 x 46mm

On screen display (OSD) module for Shark X6/X8 flight controllers.

Specs:
Input voltage: 5V DC
Operating Temperature: -10°C ~ 50°C
Cable length: 130mm
Dimensions: 33 x 20 x 11mm
Weight: 10.5g 

Included:
OSD module

6 LED Strip RED

Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR

Make use of that free wind power electricity!

For use with the EK5100 Wind Turbine kit is this versatile charging unit.

Simply connect it up to your wind turbine and it can be used to charge your mobile phone, your ipod or your rechargable batteries. 

Includes:
Ek5400 Charger
Leads and cables

Make light and music with that free wind power electricity!

For use with the EK5100 Wind Turbine kit is this melody and light board.

Simply connect it up to your wind turbine and it can be used to power the sound and light board in various modes.

Includes:
Ek5300 Board
Instructions

Spare Part - RC adapter plug for MPX for Scherrer LR UHF System