Bargain Bin
-
-
NTM Accessory Pack for 63 Series Motors$5.67Learn MoreStandard accessory pack for 63 series motors.
CNC Machined (take a close look at the cross mount, even that is machined rather than punched) from billet 6061 alloy for strength and balance.Produced in-house by hexTronik to reduce costs and deliver better value to you!
Shaft Diameter: 10mm
Shaft Length: 49mm
Cross Plate Bolt Holes: 70mmMotor Mounting Bolt Holes: 30mm & 44mm
Weight: 85g (Total) -
Nylon Spinner 38mm - 1.5inch$2.76Nylon Spinner w/ Accessories
Learn More
Adapter rings supplied to accept a variety of shaft sizes. -
Nylon Spinner 70mm - 2.75inch$4.80
Nylon Spinner w/ Accessories
Learn More
Adapter rings supplied to accept a variety of shaft sizes. -
Nylon Spinner 95mm - 3.75inch$4.78Nylon Spinner w/ Accessories
Learn More
Adapter rings supplied to accept a variety of shaft sizes. -
Nylon Spinner 102mm - 4inch$4.78
Nylon Spinner w/ Accessories
Learn More
Adapter rings supplied to accept a variety of shaft sizes. -
31mm Folding Prop Spinner 2.5mm Collet Adapter$2.73Spinner for folding Prop (Small)
Learn More
Collet style, will fit 2.3~2.5mm motor shafts
Prop shaft bolt is 5mm
Requires a propeller to suit 5mm shafts.
Weight: 9g
Diameter: 31mm -
Light Foam Wheel Diam: 25, Width: 12mm (5pcs/bag)$3.18Very well formed, light weight and firm, foam wheels.
Learn More -
-
-
-
One Way Air Refill Valve (Screw Lock)$10.33One Way Air Refill Valve (Screw Lock type)Learn MoreSize : D12xD10xd2.5xL25mm -
Nylon Clevis M3 30x9 (5pcs/bag)$1.10Nylon Clevis M3 30x9 for M3 Bolt (5pcs/bag)
Learn More
Weight:1g (Each) -
RC Controller Stick Ends. (JR)$5.99RC Controller Stick Ends. (JR) Add some bling style to your transmitter stick!Learn More -
Propeller Adapter (Collet Type) 4mm$2.37Propeller Adapter (Collet Type) 4MM
Spec:
Learn More
Motor Shaft: 4mm
Prop Shaft: 6mm
Prop Shaft length: 24mm
Weight: 14.2 grams -
Prop adapter w/ Alu Cone 4mm shaft (Grub Screw Type)$3.89Propeller adapter.
To suit;
4mm Motor Shaft.
6mmx20mm Propeller Shaft.
Alloy adapter with grub screw and alloy end cone.1pc Only.Learn More -
Anderson Powerpole Compatible PA45 Tube (10pcs/bag)$1.28Anderson Powerpole Compatible PA45 Tube (10pcs/bag)
Learn More -
Quanum 2.4Ghz Flexible Antenna.$5.25To be used with Quanum transmitter module.
Standard attachment fits most radio 2.4Ghz antenna location.The flexible antenna actually has a slightly better range than the standard antenna and can be used in difficult or small locations such as glider fuselages.
Learn More -
XT-60 to JST Charging Adapter (2pc)$2.29Use this adapter to convert an XT-60 Charge lead for charging JST equiped batteries.
Learn More -
-
-
-
Prop adapter w/Ally Cone M10x8mm shaft (Grub Screw Type)$3.42Prop adapter w/ Alu Cone M10x8mm shaft (Grub Screw Type).
Learn More
Specs:
Shaft Size: Suits 8mm motor shafts
Prop Mounting Thread: M10
Material: Aluminum
Quantity: 1pc -
-
UltraDetail Scale Cockpit$8.75UltraDetail Scale Cockpit perfect for many scale glider applications!
Specs:
Width: 76mm
Length: 270mm
Heigth: 130mm
Learn More -
-
HK-450 Glowing Tail and Light Set (Align part # HS1275)$4.06Night flying has never been more fun!
The HK-450 glow set includes flybar paddles, tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.Included.
HK-450 Flybar paddles.
HK-450 tail rotors.
HK-450 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # HS1275)Learn More -
HK-500 Glowing Tail and Light Set (Align part # H50031).$4.06Learn MoreNight flying has never been more fun!
The HK-500 glow set includes tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.
Included.
HK-500 tail rotors.
HK-500 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # H50031) -
Durafly™ Micro Series - Replacement Motor MountSpecial Price $0.90 Regular Price $1.15Durafly® ™ Micro Series - Replacement Motor Mount
Learn More -
Super Kinetic - Replacement Folding Prop Blades (1pair)Special Price $2.50 Regular Price $3.09Super Kinetic - Replacement Folding Prop Blades (1pair)
Learn More -
-
-
Durafly™ SkyMule 1500mm - Bottom Servo Hatch$2.67Durafly™ SkyMule 1500mm - Bottom Servo Hatch
Learn More
Login and Registration Form