$10 - $49.99

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3650-5400KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3660-4500KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 3T, 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

An ACE RC Ripper 3720-1100KV brushless motor with prop shaft to upgrade your  H-King MX2 Extreme 30E.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

A replacement pair of wings with flaps and ailerons for the grey XFLY Alpha Jet.

A replacement pair of wings with flaps and ailerons for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the grey XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the grey XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement gun pod for the grey XFLY Alpha Jet.

A replacement set of wheels for the XFLY Alpha Jet (3pcs).

A replacement front oleo strut with wheel for the XFLY Alpha Jet.

A replacement oleo strut with wheel and left side gear door for the grey XFLY Alpha Jet.

A replacement oleo strut with wheel and left side gear door for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement oleo strut with wheel and right side gear door for the grey XFLY Alpha Jet.

A replacement multi-connector system for the XFLY Alpha Jet (2pcs).

A replacement fuselage for the 750mm XFLY T-7A Red Hawk.

A replacement pair of vertical stabilizers for the 750mm XFLY T-7A Red Hawk (2pcs).

A replacement set of main and nose wheel landing gear with wheels for the 750mm XFLY T-7A Red Hawk.

A replacement pair of horizontal stabilizers with rotating shafts for the 975mm XFLY T-7A Red Hawk (2pcs).

A replacement set of missiles and drop tank for the 975mm XFLY T-7A Red Hawk (7pcs).

A replacement set of wheels for the 975mm XFLY T-7A Red Hawk (3pcs).

Replacement multi-function control board for the 975mm XFLY T-7A Red Hawk.

A replacement nose gear servoless retract unit for the 975mm XFLY T-7A Red Hawk.

A replacement horizontal stabilizer with elevator for the XFLY Swift 2100mm Sport Glider.

This optional EDF nacelle unit will convert your XFLY Swift 2100 into an EDF-powered sport glider. The unit includes the XFLY Galaxy 64mm 12-blade fan, and the powerful XFLY 2840-3200KV brushless motor to give your Swift on a 4S battery an incredible performance. Installation is very straightforward, once installed you will only need to remove the prop and fit the supplied nose cone.

Specs:
Type: XFLY Swift 2100 Sport Glider Optional EDF Unit
Fan: 64mm 12-blade
Motor: 2840-3200KV brushless
Thrust: 1250g
Recommended Battery: 14.8V (4S) 2200~3300mAh LiPo (not supplied)

A replacement fuselage with nosegear for the red and white XFLY 850mm Partenavia P68 Twin.

A replacement wing set with ailerons for the red and white XFLY 850mm Partenavia P68 Twin.

A replacement fuselage for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.