$1 - $1.99

This is a great tool for measuring the main blade pitch on your flybarless or flybar helicopter head. It is designed to hold your smartphone while using a leveling application to measure your heli blade's degrees of pitch. There are many free applications available for download on your smartphone that will work for this purpose. Just be sure to download one that displays the measurement in degrees.

This handy tool is constructed from lightweight yet rigid glass fiber. It features spring loaded foam padded mount posts which will accommodate holding of just about any smartphone. This tool is especially helpful when measuring blade pitch on your flybarless helicopter head since there is no flybar to use for reference with a traditional style pitch gauge.

Note: All necessary hardware is included. Just add your own smartphone after downloading one of the many free IOS/Android leveling applications.

Specs:
Maximum height of adjustable mount posts: 95mm
Maximum width of main blade: 75mm

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2 x 6mm
Weight: 0.07g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 4mm
Weight: 0.10g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.50g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 12mm
Weight: 0.65g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 4mm
Weight: 0.18g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.55g(Each)

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set includes the separator tool. Additional adapter sets for T-plugs are available here

Also available for XT-60

Specs:
Plug Type: T-Plug
Qty: 20
Weight: 0.9g (pair)

Great for protecting battery packs, combining batteries or covering an ESC etc.

Upgrade your Quanum DIY FPV V2 Goggles with this V2 add on kit.  It incorporates many new features that you have all been asking for and will effectively bring your V2 Goggle set up to V2Pro specs at minimal cost. 

A new, clear acrylic three lens set (1X, 1.25X or 1.5X magnification) and lens frame adapter providing a superior improvement in quality over the previous fresnel lens set. 

A battery pouch with velcro flap and buckle has been added and is excellent for mounting your battery on to the goggle's headstrap (behind the user's head) and will take a battery up to 77mm x 35mm x 22mm.

An EVA foam adapter for mounting a smartphone onto your goggles will turn your V2's into a Virtual Reality headset for gaming etc. Recommended for smartphone sizes up to Samsung Galaxy S6. Smartphone ports are accessible on the ends and the V2's neoprene glove front straps will hold it in place.

Extra comfortable sponge rubber strips with double sided tape have been added for extra cushioning when wearing the goggles and are simply cut to size to match the users requirements. 

Features:
• New clear acrylic lens set and frame (1.0X, 1.25X and 1.50X magnification)
• Battery pouch
• Metal “S” loop for top strap adjustment to improve wearer comfort and fitting
• Extra comfortable sponge rubber cushoining strips for facial comfort
• EVA foam adapter for smartphone for mounting
• A set of extension/conversion cables including:
      a) 3.5mm female phone jack to 2.5mm male phone plug adapter
      b) FPV DC jack to 1x5521 DC plug, 2x3315 DC plug (Length = 350mm)
      c) 3.5mm phone female to RCA male cable (Length = 150mm)
      d) XT60 male to FPV DC jack (Length = 210mm)
      e) 3.5mm phone female to RCA female cable (lenght = 150mm)

Note: A set of modification instructions are located in the "Files" tab below showing the alternate mounting method for the goggle monitor allowing for an increase in focal plane length.

Also available for use with this product:

Quanum DIY FPV Goggle V2Pro Upgrade Glove (Urban Digital Cam)

Quanum DIY FPV Goggle V2Pro Upgrade Glove (Black/Red)

Quanum DIY FPV Goggle V2Pro Upgrade Glove (Fluro Pink)

These new prop hubs are ideal for achieving that finished look to your model and the new raised motor mount will assist in providing some additional clearance for the back of the shaft against the model's firewall.

This package will fit the SK3 Series of motors in the following sizes only: 2822, 2826, 2830, 2836.

Includes:
1 x Prop hub
1 x motor mount
4 x mounting screws

TrackStar SEG 21 Racing Engine replacement rear cover.

*Color may vary

Nitro Rumble - head button

Rim (2pc) - Basher 1/16 Mini Nitro Circus MT

Upgrade Spur Gear 87T 48P for BSR Racing BZ-222 Racing Buggy

Servo Saver Mount, Servo Saver Tie Rod (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35023

Covers for Body (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35033

Servo Tape (Clear) 25mm x 1m

This awesome servo tape is super strong and when the backing is removed it is completely clear. This tape has the amazing property of being very sticky and will securely fasten your servos, receivers, speed controls and transponders to your aeroplane, helicopter car or boat, yet when you wish to remove them, they come right off without the servo tape breaking apart plus there is no residue left on the surface!!

Very clean, very secure and incredibly versatile.

Size
Width: 25mm
Depth: 1mm
Length: 1m

Self Adhesive Wing Tape 45mic x 45 mm x 100m (Wide - Black) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 24 mm x 100m (Narrow - Yellow) - Perfect for adding strength and color to your foam model!

HXT 4mm Connector to T-plug conversion charge lead

This will connect to a Lipo fitted with HXT 4mm connectors and a charge lead fitted with a T-plug

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

The KK2, the shining light for those that want to fly multirotors but don’t want to learn a programming language or sell a kidney to afford it. This is one of those great shirts that the image where to the untrained eye it is just a circuit board unless you stumble a crossed a fellow rotor-head, to which you will most likely get the nod of approval.

Size: MEDIUM

*Note: Other sizes available

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

The KK2, the shining light for those that want to fly multirotors but don’t want to learn a programming language or sell a kidney to afford it. This is one of those great shirts that the image where to the untrained eye it is just a circuit board unless you stumble a crossed a fellow rotor-head, to which you will most likely get the nod of approval.

Size: XL

*Note: Other sizes available

Polyester Hook and Loop Peel-n-stick (Black) (1 Meter)

Volantex 759-8 Phoenix 2000 - Propeller Blades.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Tamiya premium quality, clog free, wet and dry sanding paper. Ideal for modelers looking for the perfect finish. The pack contains 2 x P180, 1 x P240, 2 x P320. 

Specs:
Grades: P180, P240, P320
Dimensions: 229 x 93mm
Quantity: 5 pcs

TF Model ESC and LED lighting power distribution board suitable for most quads and multi-rotors including SMACK TF250, OrcaTF280, TF650, TF680 and TF690.  A 3 position control channel can be setup to change the LED from Solid, Slow blinking and fast blinking LED lights.

Specs:
Dimensions: 50 x 50mm
Weight: 14g
ESC Output : 6
5V Output : 1
12V Output : 1
Mounting Holes : 45mm

Prop Nut/Spinner 22mm Alloy 3/8"-24

Prop Nut/Spinner 22mm Alloy M7x1.00 Anodised Black

Prop Nut/Spinner 22mm Alloy M10x1.00 Anodised Black

Hex spinner prop nut Alloy M7x1.0

This is the carbon fiber main frame base plate for the HK-550GT helicopter.

Excellent double sided tape for outdoor use. This tape is strong and padded.

Great for using on applications that need a bit of padding such as mounting receivers, flight controllers or ESCs. 

Specs:
Width: 20mm
Length: 1500mm

Nylon Spacer 20mm M3 F/F Red (10pcs)

Specs:
Shape: Hex
Length: 20mm
Screw Thread: M3 Female/Female
Qty: 10