Bargain Bin

Increase your RC signal validity and reduce your probability of signal loss in carbon fiber and/or 3D airframes as well as long-range FPV platforms by using the OrangeRX DSMx/DSM2 compatible 6 Channel Diversity Module.

The OrangeRX DSM2/DSMx Compatible 6 Channel Diversity Module will receive data from up to 6 satellite receivers, check the signal validity, and then outputs the valid signal to any satellite interface-enabled DSM2/DSMx compatible receiver or via direct connection to a UAV or Flybarless Helicopter Flight Controller.

The unit can be powered from external 5V~8.4V or directly from the 3.3V satellite port and incorporates a binding function allowing satellites to be bound without using any additional receiver.

This high quality switch is made in Taiwan and is proven to exceed more than 10000 switch cycles during testing.
This switch is designed for life time use.

Great for repairing your radio or making a swtich for your own project.

Spec.:
Style: 2-Way, Round Head
Dimension(LxWxD): 13x8x7mm(Plastic part only)
Length: 29mm(Switch & Mounting hole)
Mounting Hole Size: M6x8mm
Weight: 3.7g(Each)

30P Pin Header and Socket - 2.54mm Pitch (5 pcs)

Perfect for DIY electronic projects.

This compact, lightweight power supply filter helps clean up dirty DC current that often causes lines in wireless video images. The filter is an LC type that uses large value inductor and capacitor components. Their values are robust enough to remove moderate amounts of power supply noise.

The filter reduces DC-DC switcher supply ripple and helps clean noisy power from a shared battery. For example, if your robot or R/C model's 12V motor battery also powers the video camera and A/V transmitter, then this LC filter can help reduce the video "noise" that may appear when the motor is running.

Note: Installations with severe power supply noise may not be fully cured with this filter. In such cases a shared battery should be avoided.

Features:
• L-C Filter circuit reduces DC supply noise
• Built-in Reverse Polarity protection
• Supports up to 14 VDC at 1.7 Amp (maximum)
• Compact design

Specs:
Voltage drop over filter: 225mV at 900mA
Impedence/ESR: 0.06Ohm at 100kHz/16V
Ripple Current: 1190mA
DC Resistance: 0.25 Ohm/path
Dimensions: 38x12.5x11.5mm
Weight: 6.4g

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 1m
Color: Grey

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 1m
Color: Pink

Great for protecting battery packs, combining batteries or covering an ESC etc.

Great for protecting battery packs, combining batteries or covering an ESC etc.

Great for protecting battery packs, combining batteries or covering an ESC etc.

This adjustable receiver antenna mount is a simple solution to ensure that you get the best range from your equipment.

Self-adhesive pads secure the mount to any flat surface on your model, while the knurled locking screw lets you alter the angle of antenna and fold them flat for transportation.

The antenna tubes can be cut to any length and provide a secure safe way to vertically mount your antennas.

Features:
• Optimal 45deg vertical mounting
• Adjustable angle
• Can be used with any long antenna receiver

Specs:
Weight: 6.6g
Size: 41 x 27 x 15mm
Tube length: 100mm

Included:
2 x Mounts
2 x Self-adhesive pads
4 x Antenna tubes

The Vertical mount cable tidy clip set is the perfect solution for the modeller who likes a neat
and tidy install. The clips are supplied on the sprue and have single wire to triple wire options.

The clips are perfect for foam mounting, but can be used for almost any application simply cut a slot in your model and glue the cable tidy in position!

Specs:
Material: ABS Plastic
Weight Per Set: 30g
Fits Max Cable Diameter: 4mm

The cable tie clip mounting set is the perfect solution for the modeller who likes a neat and tidy install. The clips provide slots for cable ties up to 4mm width and can be simply glued in onto the desired position within your model.

The clips are suitable for fiberglass, foam or wooden models but can be used for almost any application.     

Specs:
Material: ABS Plastic
Weight Per Set: 11g
Fits: 4mm cable ties

Balance Lead Tidy/Saver 4S (4pcs)

Looking for a way of keeping balance leads tidy or out of your multirotor propellers then these little adapters will fit your needs. They come with double sided tape to stick them down.

There are different sizes depending on the cell count of your battery.

The Orange OpenLRSng is an open-source receiver that can be programmed to use your choice of protocol and any channel in the 915MHz range. It is a fully user-customizable RF receiver that can even be programmed to utilize additional features such as telemetry, operative remote control via sticks (cPPM ready), and mission control.

The Orange OpenLRS 433MHz TX Module is designed for use with APM flight control software and can be programmed to use your choice of protocol and any channel in the 433MHz range. Fully user-customizable, the transmitter system can even be programmed to utilize additional features such as telemetry, operative remote control via stics (cPPM ready), and mission control.
It is equipped with Bluetooth technology so the user can connect it to a tablet, smartphone, or PC. All telemetry data, mission planning, and flight modes will be available in APM Mission Planner on PC or Droid Planner, or similar apps for Android devices. Thanks to the Bluetooth function, no additional leads are required to setup/program the transmitter module.

Upgrade your Quanum DIY FPV V2 Goggles with this V2 add on kit.  It incorporates many new features that you have all been asking for and will effectively bring your V2 Goggle set up to V2Pro specs at minimal cost. 

A new, clear acrylic three lens set (1X, 1.25X or 1.5X magnification) and lens frame adapter providing a superior improvement in quality over the previous fresnel lens set. 

A battery pouch with velcro flap and buckle has been added and is excellent for mounting your battery on to the goggle's headstrap (behind the user's head) and will take a battery up to 77mm x 35mm x 22mm.

An EVA foam adapter for mounting a smartphone onto your goggles will turn your V2's into a Virtual Reality headset for gaming etc. Recommended for smartphone sizes up to Samsung Galaxy S6. Smartphone ports are accessible on the ends and the V2's neoprene glove front straps will hold it in place.

Extra comfortable sponge rubber strips with double sided tape have been added for extra cushioning when wearing the goggles and are simply cut to size to match the users requirements. 

Features:
• New clear acrylic lens set and frame (1.0X, 1.25X and 1.50X magnification)
• Battery pouch
• Metal “S” loop for top strap adjustment to improve wearer comfort and fitting
• Extra comfortable sponge rubber cushoining strips for facial comfort
• EVA foam adapter for smartphone for mounting
• A set of extension/conversion cables including:
      a) 3.5mm female phone jack to 2.5mm male phone plug adapter
      b) FPV DC jack to 1x5521 DC plug, 2x3315 DC plug (Length = 350mm)
      c) 3.5mm phone female to RCA male cable (Length = 150mm)
      d) XT60 male to FPV DC jack (Length = 210mm)
      e) 3.5mm phone female to RCA female cable (lenght = 150mm)

Note: A set of modification instructions are located in the "Files" tab below showing the alternate mounting method for the goggle monitor allowing for an increase in focal plane length.

Also available for use with this product:

Quanum DIY FPV Goggle V2Pro Upgrade Glove (Urban Digital Cam)

Quanum DIY FPV Goggle V2Pro Upgrade Glove (Black/Red)

Quanum DIY FPV Goggle V2Pro Upgrade Glove (Fluro Pink)

The OrangeRx 6ch compact receiver has been designed for FPV racing drones with carbon frames. The extra-length antenna allows you to route them outside of the frame for extended range and a robust link to your transmitter.

OrangeRx receivers are built using original components, 32-bit MCUs, and with state of the art SMT automation to ensure a quality product each and every time. Every single receiver is manufactured using impedance-controlled PCBs with exact tuning to provide signal stability and range that exceeds any of the previous generation ORX products. In fact, our testing has shown that the R617XL exceeds the range of other receivers in the same class.

All R617XL OrangeRx receivers are QC tested using our latest method that ensures range checking takes place as the receiver is programmed. Simply put, if the R617XL cannot pass the range check it cannot be programmed, this ensures 100% of R617XLs are guaranteed to work flawlessly. The R617XL ushers in a new era of quality, reliability, and performance for the OrangeRx lineup.

The receiver features "True Diversity" technology, which is especially important for long-range flights and in situations where you need that more robust reception. This receiver is very useful where carbon is used in the construction of your model where the antenna can be in the shadow of the airframe. If one of the antennae cannot receive a signal due to its orientation then the satellite will use the other one to receive the commands from the transmitter.

The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.

Upgrade your 150cc size gas engine model with the Turnigy RotoMax 150cc Brushless outrunner motor. This motor will provide clean and efficient power for your large-scale aircraft without the mess and hassle of fuel.

Specs:
Battery: 14 Cell/51.8V
RPM: 150kv
Max current: 200A
Watts: 9500w
No load current: 51.8V/5.2A
Internal resistance: 0.011 ohm
Weight: 2530g
Diameter of shaft: 10mm
Winding: 8T
Stator Pole: 24
Motor Pole: 20
Stator Diameter: 101
Lamination Thickness: 0.2mm
Suggested ESC: 250A 14S Compatible

Performance Data (14S):
26x10: 7401W, 154A, 21,398g static thrust
27x10: 8225W, 172A, 23,266g static thrust
28x10: 9076W, 192A, 25,141g static thrust

Multistar 1704 V2 Prop Adapter Set 2 x CW / 2 x CCW.

High-quality prop adapter set to fit the Multistar 1704 range of motors. The package contains 2 x clockwise and 2 x counter-clockwise adapters and a complete set of the required fixing screws.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):

4x2: 24W, 3.35A, 131g static thrust
4x3: 31W, 4.4A, 180g static thrust
4.1x4.1: 40W, 5.7A, 235g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (2S):
5.25x5.5: 48W, 6.7A, 323g static thrust
5.5x6.5: 62W, 8.5A, 412g static thrust
6x6: 74W, 10A, 466g static thrust

Performance Data (3S):
4.1x4.1: 58W, 5A, 284g static thrust
4.5x4.1: 74W, 7A, 363g static thrust
5x4.1: 100W, 9.5A, 472g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (2S):
12x8: 81W, 11A, 524g static thrust
13x10: 95W, 13A, 577g static thrust
14x10: 102W, 15A, 579g static thrust

Performance Data (3S):
11x3.8: 136W, 13A, 639g static thrust
11x5.5: 158W, 15A, 753g static thrust
11x7: 173W, 16A, 827g static thrust

TrackStar V2 electric motor replacement sensor incorporating rear bearing for 3.5T~8.5T motors.  

Trackstar V2 motor front case with bearing and isolator paper.

Modified rotor for Trackstar V2 motors.
This rotor has a permanent sintered neodymium N38UH magnet.
Includes washer and spacer set. 

Specs:
Magnet: N38UH Neodymium Magnet
Dimensions: 12 x 5 x 25.3mm
Shaft: 5 x 12.25mm

These new prop hubs are ideal for achieving that finished look to your model and the new raised motor mount will assist in providing some additional clearance for the back of the shaft against the model's firewall.

This package will fit the SK3 Series of motors in the following sizes only: 2822, 2826, 2830, 2836.

Includes:
1 x Prop hub
1 x motor mount
4 x mounting screws

These new prop hubs are ideal for achieving that finished look to your model and the new raised motor mount will assist in providing some additional clearance for the back of the shaft against the model's firewall.

This package will fit the SK3 Series of motors in the following sizes only: 3530

Includes:
1 x Prop hub
1 x motor mount
4 x mounting screws

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 1000mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 20C Constant / 40C Burst
Weight: 72g (including wire, plug & case)
Dimensions: 101x20x16mm
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*The length of balance charging wire may vary

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 1000mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 20C Constant / 40C Burst
Weight: 78g (including wire, plug & case)
Dimensions: 104x22x7.5mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*Note: The length of Balance charging wire may vary

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft

Spec.
Capacity: 1200mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 25C Constant / 50C Burst
Weight: 59g (including wire, plug & case)
Dimensions: 118x16x7mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*The length of balance charging wire may vary

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 1200mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 25C Constant / 50C Burst
Weight: 85g (including wire, plug & case)
Dimensions: 120x17x7.5mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*The length of balance charging wire may vary

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefield, no one wants to compromise on firepower! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go-to pack for anyone who is serious about Airsoft.