Bargain Bin

When it comes to putting rounds down range, no one wants to compromise on firepower! that's why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag, and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Spec.
Capacity: 1300mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 25C Constant / 50C Burst
Weight: 122g (including wire, plug & case)
Dimensions: 144x7.4x18mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)

 
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft

Spec.
Capacity: 1400mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 15C Constant / 25C Burst
Weight: 76g (including wire, plug & case)
Dimensions: 126x13x22mm 
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex) 

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*The length of balance charging wire may vary

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Spec.
Capacity: 1400mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 110g (including wire, plug & case)
Dimensions: 127x20x21mm
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
 
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology

*The length of balance charging wire may vary

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Spec.
Capacity: 1400mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 15C Constant / 25C Burst
Weight: 79g (including wire, plug & case)
Dimensions: 125x7x21mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
 
 
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

*The length of balance charging wire may vary

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Spec.
Capacity: 1400mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 115g (including wire, plug & case)
Dimensions: 128x7x20mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.

 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

*The length of balance charging wire may vary

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 2000mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 15C Constant / 25C Burst
Weight: 106g (including wire, plug & case)
Dimensions: 127x19x21mm 
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex) 

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*The length of balance charging wire may vary

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Spec.
Capacity: 2000mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 15C Constant / 25C Burst
Weight: 109g (including wire, plug & case)
Dimensions: 125x10x21mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
 
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology

*The length of balance charging wire may vary

HobbyKing Slowfly Propeller 12x4.5 Red Std & Reverse Rotation (4pcs).

GWS EP Propeller (RD-1575 381X191mm)

DD:Direct Drive (fast spinning) -Straight Edge
RD:Reduction Drive (Slow Fly, Outrunner or Gearbox) - Curved Edge

All GWS EP Propellers Stocked!
GWS EP Counter Rotating Propeller (RH-9047 228x119mm) (6pcs/set)

GWS EP Propeller (RD-1365 330x165mm)

DD:Direct Drive (fast spinning) -Straight Edge
RD:Reduction Drive (Slow Fly, Outrunner or Gearbox) - Curved Edge

GWS EP Propeller (RD-1410 356x254mm)

DD:Direct Drive (fast spinning) -Straight Edge
RD:Reduction Drive (Slow Fly, Outrunner or Gearbox) - Curved Edge

All GWS EP Propellers Stocked!
GWS EP Propeller (RD-1390 330x228mm)

DD:Direct Drive (fast spinning) -Straight Edge
RD:Reduction Drive (Slow Fly, Outrunner or Gearbox) - Curved Edge

5mm Male Gold Plated Spring Connector - Low Profile (10pcs)

Pro Tip: If you find the bullets hard to plug in to your battery, take a set of needle nose pliers and gently squeeze two of the six prongs, turn the plug and repeat on the other four prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

GWS Style 14x4.7 Slowfly Propeller Grey (2pcs).

GWS Style 14x4.7 Slowfly Pusher Propeller Grey (2pcs).

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!   

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 51mm
Overall length: 48mm
Center hole: 6mm
Construction: Aluminum/Nylon
Weight: 20g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 63mm
Overall length: 60mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 26g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 75mm
Overall length: 68mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 43g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 75mm
Overall length: 68mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 43g

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

The Quad plate has 4 10x10mm slots for motor arms and 45x45mm posts for flight controller mounting. The center plate as other provisions for mounting other Bits and holes at 10mm intervals.

Specs:
Size: 100x100mm
Weight: 77g
Color: Green

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

*This item is only available as 1m lengths, if you wish to purchase longer continuous lengths use R12A1062-06

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 10AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

Alloy Prop Saver & Adapter w/ Band
Weight: 2.5g

Please select below for your size;
Available: 4mm

High quality carbon fiber round tube that can be used for many applications or custom projects.

Specs:
Length: 330mm
Outer diameter: 16mm
Inner diameter: 14mm

A replacement pair of wing interplane struts for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement wing spar for the XFLY Alpha Jet.

A replacement screw set for the XFLY Alpha Jet (12pcs).

A replacement screw set for the 750mm XFLY T-7A Red Hawk (12pcs).

A replacement set of control horns for the 750mm XFLY T-7A Red Hawk (4pcs).

A replacement set of main and nose wheel landing gear with wheels for the 750mm XFLY T-7A Red Hawk.

A replacement wing spar for the 975mm XFLY T-7A Red Hawk.

A replacement set of screws for the 975mm XFLY T-7A Red Hawk (20pcs).

Replacement nose cone for the 975mm XFLY T-7A Red Hawk.