Bargain Bin

Mini Tamiya to T-Connector Battery Adapter (2pcs/bag)

This adapter will convert a Mini Tamiya equipped battery to a T-Connector for use with a T-Connector equipped ESC or a T-Connector Charge lead.

A handy adapter to convert an XT60 equipped battery to an MPX style connector. Useful for use with MPX equipped ESC or Charge leads.

Spec:
Weight: 5.3g(Each)

This handy little device allows you to program your ZYX Flybarless Controller wirelessly via Bluetooth connectivity with your Android device. Now there is no longer a need to bring your PC to the field for making programming adjustments!

Simply plug this device into the data port of your ZYX unit, install the free ZYX programming app on your Android mobile device and you are all set! It's that easy. You will be able to access all of the same programming options that are available on the PC software directly from your Android device.

This is a must have for any ZYX user with an Android mobile device!

Features:
• Compact size
• Easy to use
• Bluetooth wireless connectivity
• Free Android app available
• Eliminates the need to bring your PC to the field

Specs:
Dimensions: 32x14x5mm
Weight: 3g

*Note: This device currently supports Android 1.6 and above versions of the operating system.

Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set

Nylon Spinner w/ Accessories
Adapter rings supplied to accept a variety of shaft sizes.

Lock Nuts 6-32 (bag of 100pc)

The HobbyKing helicopter pitch gauge is made from ultra-rigid fiberglass board and features dual ball bearings to ensure accurate measurements every time. This pitch gauge is supplied in kit form to keep production costs down which means we can pass the savings on to you!

Specs:
Measurement: +/- 20 Deg
Size: 145mm x 105mm
Max Blade Width: 80mm

Note: An assembly guide can be found in the FILES tab below.

Use this adapter to convert an XT-60 Charge lead for charging JST equiped batteries. 

Super Kinetic - Replacement Motor Mount

Super Kinetic - Replacement Canopy

HobbyKing® Bix3 Trainer 1550mm - Replacement Tail Wheel

HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set

13x4.7 SF Turnigy Carbon Mixed slow fly prop w/adapters (2 pcs).

Made of nylon, these E-Props are lightweight and durable. Available in both rotations, they are perfect for your twin-motor aircraft or drones, includes adaptors.

11x5 ABS Electric propeller (Green) 2pcs with adapter rings.

Diff. Case - BSR 1/8 Rally

Hobbyking™ Hardened Steel Pinion gears are the last pinion gears you will ever need to purchase. The Pinion gears are machined from a special steel alloy and are hardened for ultimate strength and durability. During the manufacturing process, extremely tight tolerances are maintained so the pitch of the gear is precise. This means Hobbyking™ Pinion gears run very quietly and efficiently.

As Brass or Aluminum gears wear, the interface between the pinion and spur gears degrade. The hardened Pinions are so tough that you can eliminate the need for spare gears in your toolbox. The Pinion gears are also strong enough to survive any insane power system that you choose to fit in your 3D helicopter.

Specs:
Pitch: 0.7M
Tooth Count: 12T
Fits Shaft Size: 6mm
Weight: 2.65g

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

This set consists of the lower front fuselage skid plate and the wing center section/belly skid plate for the Durafly EFX Racer series of airplanes.

Avios Yakovlev Yak-52 Military Scheme Replacement Propeller Blades.

Basher RZ-4 1/10 Rally Racer - Composite Rear Upright (2pcs)

Doll Stand - Basher PBull 1/18 4WD Desert Buggy

Clear Body - Basher PBull 1/18 4WD Desert Buggy

TrackStar Shock End Caps 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Big Bore Suspension Spring Retainer 13mm (4) S124103

Compatible with the following Shock Absorbers
S124300, S160323, S160326

TrackStar Shock Bottom Cap Set with O-Ring S120052

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100, S124300, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length: 55mm
Spring Rate:  1.2Kg
Color: Gold

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length: 65mm
Spring Rate:  1.8Kg
Color: Silver

Compatible with the following Shock Absorbers
S160085, S160100

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:65mm
Spring Rate:  1.2Kg
Color: Blue

Compatible with the following Shock Absorbers
S160085, S160100

Aluminum Rear Lower Suspension Arm (2Pcs/Bag) - A2003T, A2027, A2029, A2035 and A3007

6 LED Strip RED

Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.