Bargain Bin
-
-
One Way Air Refill Valve (Screw Lock)$10.33One Way Air Refill Valve (Screw Lock type)Learn MoreSize : D12xD10xd2.5xL25mm -
Nylon Clevis M3 30x9 (5pcs/bag)$1.10Nylon Clevis M3 30x9 for M3 Bolt (5pcs/bag)
Learn More
Weight:1g (Each) -
RC Controller Stick Ends. (JR)$5.99RC Controller Stick Ends. (JR) Add some bling style to your transmitter stick!Learn More -
Propeller Adapter (Collet Type) 4mm$2.37Propeller Adapter (Collet Type) 4MM
Spec:
Learn More
Motor Shaft: 4mm
Prop Shaft: 6mm
Prop Shaft length: 24mm
Weight: 14.2 grams -
Prop adapter w/ Alu Cone 4mm shaft (Grub Screw Type)$3.89Propeller adapter.
To suit;
4mm Motor Shaft.
6mmx20mm Propeller Shaft.
Alloy adapter with grub screw and alloy end cone.1pc Only.Learn More -
Anderson Powerpole Compatible PA45 Tube (10pcs/bag)$1.28Anderson Powerpole Compatible PA45 Tube (10pcs/bag)
Learn More -
Quanum 2.4Ghz Flexible Antenna.$5.25To be used with Quanum transmitter module.
Standard attachment fits most radio 2.4Ghz antenna location.The flexible antenna actually has a slightly better range than the standard antenna and can be used in difficult or small locations such as glider fuselages.
Learn More -
XT-60 to JST Charging Adapter (2pc)$2.29Use this adapter to convert an XT-60 Charge lead for charging JST equiped batteries.
Learn More -
-
-
-
Prop adapter w/Ally Cone M10x8mm shaft (Grub Screw Type)$3.42Prop adapter w/ Alu Cone M10x8mm shaft (Grub Screw Type).
Learn More
Specs:
Shaft Size: Suits 8mm motor shafts
Prop Mounting Thread: M10
Material: Aluminum
Quantity: 1pc -
-
UltraDetail Scale Cockpit$8.75UltraDetail Scale Cockpit perfect for many scale glider applications!
Specs:
Width: 76mm
Length: 270mm
Heigth: 130mm
Learn More -
-
HK-450 Glowing Tail and Light Set (Align part # HS1275)$4.06Night flying has never been more fun!
The HK-450 glow set includes flybar paddles, tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.Included.
HK-450 Flybar paddles.
HK-450 tail rotors.
HK-450 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # HS1275)Learn More -
HK-500 Glowing Tail and Light Set (Align part # H50031).$4.06Learn MoreNight flying has never been more fun!
The HK-500 glow set includes tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.
Included.
HK-500 tail rotors.
HK-500 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # H50031) -
Durafly™ Micro Series - Replacement Motor MountSpecial Price $0.90 Regular Price $1.15Durafly® ™ Micro Series - Replacement Motor Mount
Learn More -
-
-
Durafly™ SkyMule 1500mm - Bottom Servo Hatch$2.67Durafly™ SkyMule 1500mm - Bottom Servo Hatch
Learn More -
Nylon Spinner with Alloy Backplate 38mm Red$3.71Excellent Quality Nylon Spinner with Lightened Alloy Backplate 38mm White - Mount hole 6mm
Weight: 12gLearn More -
Nylon Spinner with Alloy Backplate 70mm Black$8.47Excellent Quality Nylon Spinner with Lightened Alloy Backplate 70mm Yellow - Mount hole 8mm
Learn MoreWeight: 47g
-
Telescopic Magnetic Pick-Up Tool$4.39This extendable magnetic pick-up tool is a great addition to any toolbox, it makes picking up small metal parts that fall in hard to reach places extremely easy.
Specs:
Learn More
Magnet Diameter: 7mm
Extended Length: 635mm
Magnet Strength: 1.5kg lift capacity -
OrangeRx Silicone Protection Cover for Non Satellite Receivers$2.07Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.
Specs:
Learn More
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g -
Orange RX Silicone Rubber Shell for R620 Series Receivers$1.64Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Learn More
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.
Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g -
OrangeRx Silicone Protection Cover for Satellite Receivers$2.09Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.
Learn More
Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g -
Orange RX Silicone Rubber Shell for R615 Series Receivers$1.66Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.Specs:
Learn More
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g -
OrangeRx Silicone Rubber Shell for R620 Series Receivers (Black)$1.66Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.Specs:
Learn More
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g -
-
Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)$2.11Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)
Learn More
Login and Registration Form