All Planes

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The H-King Viper 64 is affordable, very stable, and has predictable handling qualities, making it the ideal choice for your first venture into flying EDF jets. It has stunning looks, and the performance on its 6S set-up gives it a fantastic turn of speed and the ability to perform big, jet-style maneuvers, this makes it also the perfect sports jet for the more experienced RC pilot. The H-King Viper 64 is based on a small two-seater homebuilt jet airplane designed by the Viper Aircraft Corporation in the States during the late 1990s.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.