P-51D Shangri La - Replacement Horizontal Tail

Super Kinetic - Replacement Motor Mount

Super Kinetic - Replacement Canopy

Super Kinetic - Replacement Control Wire - Steel (With Ball Link)

Super Kinetic - Replacement Decals (2pcs/set)

The HobbyKing® ™ Walrus is a very capable, fun model that appeals to both new and experienced pilots alike. Easy to fly and easy to build, the Walrus is great value for money!

Made from tough EPO foam, the Walrus is simple to assemble, the colourful decals are pre-applied, and the brushless outrunner motor, ESC, and all servos are pre-installed, even the folding prop and spinner have been factory fitted! As well as being easy to assemble, the Walrus is very practical and features a stiff, CF-reinforced 2pc Plug-in-wing and a large canopy area that allows you to fit a wide range of lipoly packs. Its somewhat portly proportions also make the Walrus super easy to hand-launch. The great-looking scheme is perfect for orientation, and its appealing size gives the Walrus plenty of presence, as well as the ability to handle a little wind.

Durafly™ SkyMule 1500mm - Bottom Servo Hatch

HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set

HobbyKing® Bixler 3 Trainer 1550mm - Replacement Landing Gear

HobbyKing® Bix3 Trainer 1550mm - Replacement Tail Wheel

HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set

HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter

HobbyKing™ Wingnetic 805mm - Replacement Fuselage

HobbyKing™ Bixler 3 Trainer 1550mm - Replacement Wing Spar

HobbyKing™ Bix3 Trainer 1550mm - Replacement Wing Bolts

2 Pieces Included

Hobbyking™ Super-G Autogyro - Blade Grip Bolts

Includes 3 pieces

HobbyKing Hall Cherokee Glider 1700mm - Fuselage Set

EPO Fuselage with decals, plastic. control rods

Durafly™ EFX Racer - Replacement Fuselage (Yellow)

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

Durafly™ EFX Racer - Replacement Battery Hatch (Yellow)

Durafly™ EFX Racer - Replacement Horizontal Stabilizer

Durafly™ EFX Racer - Replacement Cowl (Yellow)

This set consists of the lower front fuselage skid plate and the wing center section/belly skid plate for the Durafly EFX Racer series of airplanes.

Avios Yakovlev Yak-52 HobbyKing Scheme Replacement Canopy.

Durafly® ™ Tundra - Horizontal Tail / Elevator. This assembly is suitable for the V1, V2, and the Night versions of the Tundra.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

The B-17 Flying Fortress remains one of the most famous allied bombers of WW2.  Although it served in every theatre of the war, it was in the European Theatre of Operations (ETO) with the renowned 8th Air Force in particular, that this sturdy and well-armed heavy bomber flew its way into the history books.

Building on the success of our original HobbyKing "Memphis Belle" model we have redesigned this huge 1875mm wingspan warbird and now bring to you the best flying and best-looking rendition of this iconic heavy bomber available anywhere in this size. 

Our fantastic model is simple and fast to assemble right out of the box with all of the servos and ESCs pre-installed.  It is made from EPO foam, so it's as tough as you would expect and as the one-piece wing is removable, it is also very practical to transport.

The pre-fitted electric scale wheels retract forward like the real aircraft and are large enough to tackle almost any surface.  There is also plenty of power on tap from the four upgraded 850kv brushless motors. Counter-rotating props make zero torque, smooth take off's, the order of the day and with pre-fitted split flaps, landings are also stress-free.

But it's the attention to detail on this version that is impressive.  Panel lines have been reduced and two new accurate scale color schemes are now available.  Olive drab/grey and overall silver. These two schemes represent the vast majority of B17's that went into action and as an additional feature, we've also included a choice of two 8th Air Force decal sets for each color scheme as well as an optional chin turret so that you can create either an early "F" or later "G" variant. 

As a Flying Fortress, our model also bristles with guns, with top and ball turrets as well as tail, nose, and waist gun positions.  Dummy Wright Cyclone engines are finished with three-blade counter-rotating scale props and hubs and finally, working navigation & landing lights add to the overall realism level of this impressive model.

Beneath the surface, our B-17 has been beefed up with additional wing bracing and of course, she has been test flown extensively and it's in the air that this model really comes into its own.

You will be struck at how easy it is to fly, almost like a powered glider at times and even though it's more than capable of performing non-scale aerobatics including loops and rolls, it is at slower speeds that it looks every bit the heavy bomber.

With its impressive wingspan, low passes translate into a real presence in the air and the sound of those four props driving it forward just adds to the experience.

Our B-17 is a scale pilot's dream model. It's a big airplane that looks great, flies beautifully, and definitely has the "wow" factor that will have heads turning wherever and whenever you fly it.

XFLY J-65 Twin 40mm EDF WHITE PNP RC plane

The Walrus is an extremely stable RC plane for the new flyer to the seasoned pro. Now you can light up the sky and enjoy the fun of night flying. LED super bright lights will light up your nightlife!

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.