Avios Grand Tundra - FPV Hatch (Green/Gold)

Avios Grand Tundra - FPV Hatch (Blue/Silver)

Avios Grand Tundra - Receiver Hatch

Avios Grand Tundra - Water Rudder Set

Missing something? This replacement nose cone and foam insert will get you back in the air in no time. Designed for the Sidewinder Racing Wing 1100mm PNF, buy these quality spare parts for the lowest prices at HobbyKing.

Durafly™ Supermarine Spitfire Mk24 V2 - Replacement Spinner

Repair your Upgraded Durafly Tundra with this spare fuselage set.

Repair your Upgraded Durafly Tundra with this spare fuselage set.

Return to the air in your H-King Cessna 182 Skylane. These high quality spare parts are sturdy and great to have on hand in case of crash landings. Use the replacement wings to get back to what you love.

HobbyKing Bixler 2 EPO 1500mm - Replacement Fuselage (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Main Wing (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Vertical Fin (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Decals (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Canopy

HobbyKing Bixler 2 EPO 1500mm - Replacement Stabilizer (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Wing (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Horizontal Stabilizer (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Vertical Fin (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Sport Canopy

H-King Bixler 3 Glider 1550mm - Replacement Decal Set (Blue/Red)

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Phantom FPV Flying Wing 1550mm - Replacement Motor Cover

Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set

HobbyKing Bixler 2 EPO 1500mm -  Replacement Flap Hinges (6pcs/bag)

Works for both Bixler 2 and Bix3 models.

Hobbyking Bixler 2 EPO 1500mm - Replacement Aileron Hinges (10pcs/bag)

Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch

Pioneer 1020mm - Replacement Horizontal Stabilizer

La Belle Dame 1180mm - Propeller Nuts

This great-looking and superb flying AVIOS KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.

The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the AVIOS team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.