The Durafly SlowPoke is an EPO foam model of the classic balsa design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of local fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking plane.

The H-King MX2 Extreme 30E is perfect to take a pilot from general sport flying to confidently flying 3D aerobatics. It is lightweight, has a powerful brushless motor set-up, and features large control surfaces that make it great for lively tumbling and extreme, spirited types of flying. Things such as hovering, waterfalls, harriers, knife-edge, rolling circles, and other extreme 3D aerobatics are made much easier when flying the MX2 Extreme.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

A replacement canopy for the Volantex Ranger 1600, Ranger 2000, and Phoenix V2 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex ASW 28, suitable for versions V2 and V3. 

A replacement wing set for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement fin, rudder, and horizontal stabilizer for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement wing set for the Volantex Ranger 2400, and Phoenix 2400 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex Ranger 2400 and Phoenix 2400.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 right-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 horizontal stabilizer with hinged elevator and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 vertical stabilizer with hinged rudder and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement set of AVIOS Extra 330LX V2 wing side-force generators. 

Note: This replacement set will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 carbon wing spar.

Note: This replacement will also fit the AVIOS Extra 3300LX V1.

This great-looking and superb flying AVIOS KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.

The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the AVIOS team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.

A replacement wing center section for the AVIOS KingTwin 1700 with factory-applied decals, and wiring. 

A replacement left-hand wing panel for the AVIOS KingTwin 1700 with factory-applied decals, aileron, spars, and latching catch.

A replacement right-hand wing panel for the AVIOS KingTwin 1700 with factory-applied decals, aileron, spars, and latching catch. 

A replacement vertical stabilizer for the AVIOS KingTwin 1700 with factory-applied decals, rudder, anti-collision beacon, and wiring. 

A replacement pair of horizontal stabilizers for the AVIOS KingTwin 1700 with factory-applied decals, elevators, and spars.

A replacement canopy/battery hatch with crystal clear windshield for the AVIOS KingTwin 1700.

A replacement pair of painted motor cowls with dummy exhausts for the AVIOS KingTwin 1700.

A replacement pair of spinners and backplates for the AVIOS KingTwin 1700.

A complete set of replacement pushrods for the AVIOS KingTwin 1700.

A replacement Aerostar 3748-820KV brushless motor with mount and connectors for the AVIOS KingTwin 1700.

A replacement fuselage for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement wing center section for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement set of outer wing panels for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement horizontal stabilizer and elevators for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement vertical stabilizer and rudder for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement set of pre-painted motor cowlings for the 1500mm Avios BushMule V2.

Note: These replacement spare parts for the Avios BushMule V2 are also compatible with V1 Avios BushMule. Please note you may need to repaint it due to the different color schemes in each version.

AVIOS BushMule V2 Twin-Motor Sports/STOL Airplane Replacement Canopy w/Decals.

Note: These replacement spare parts for the AVIOS BushMule V2 are also compatible with V1 AVIOS BushMule. Please note you may need to repaint it due to the different color schemes in each version.

A replacement decal set for the 1500mm AVIOS BushMule V2.

This version of the popular Piper J-3 Cub is in a striking new Swiss color scheme which is a must for all scale pilots. This color scheme uses a lot less paint so there is a bit of a saving in weight which further reduces the already low wing loading. The attention to detail makes it an extremely realistic model, and it comes with a nice, generous size 1400mm wingspan. Like all Cub's with its large wingspan, and stable flying characteristics it is very easy to fly, perfect for low-hour pilots and experts alike. The Swiss Cub also has a new all-metal landing gear which is virtually indestructible, this will survive the hardest of landings. Further weight saving has been achieved by the removal of the metal tail bracing wires, these have been replaced with scale-looking, easy to fit, lightweight elasticated white shock chord.