A replacement vertical stabilizer with rudder, mounting screw, and factory-applied decals for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement hatch cover that is supplied with a clear, and gold canopy for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement domed spinner with propeller hub assembly for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

This version of the Yak-11 is the Red Reno Racer, this is not a totally scale color scheme, but is loosely based on the Strega P-51 Reno Mustang. As mentioned above, being the racer version it is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 95A ESC and 16x6 prop will give the Yak-11 an incredible turn of speed in excess of 100mph. It is quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform with the Yak, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement tail set for the AVIOS Albatross V2. This set includes the vertical and horizontal stabilizers, control horns, rudder, rudder servo with pushrod, and decals.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement canopy/cockpit hatch for the AVIOS Albatross V2, includes the clear window glazing.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of wing floats for the AVIOS Albatross V2.

Note: These are also suitable for the Albatross V1, but of course the colors are different.

A replacement clear water rudder with spring for the AVIOS Albatross V2.

Note: This is suitable for the Albatross V1 as well.

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

A replacement fuselage with decals and canopy for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement wing set with flaps, ailerons, and decals for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement engine nacelle and cowl for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the US Coast Guard version of the Avios C-130 V2. Please note that this spare part is not suitable for the original versions of the C-130.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement set of landing gear doors for the Civilian Cargo version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement nose landing gear set which includes servoless retract unit, gear doors, actuators, wiring, and housing for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement main landing gear set which includes servoless retract unit, actuating rods, wheels struts, and axles for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

A complete replacement set of decals for the US Coast Guard version of the Avios C-130 V2.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement carbon wing joining spar for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin.