The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

The HobbyKing™ Paramotor is extremely easy to fly due to its very gentle and stable flight characteristics yet once you are used to it, it will perform loops and rolls with ease. Due to the design, the huge high-performance 2250mm sail opens quickly for easy launching and it will retain its shape even in turbulence. The single skin durable sail is made from 100% ripstop fabric and comes pre-rigged with tough nylon chords that are ready to attach to the durable aluminum gondola.

The Durafly SlowPoke is an EPO foam model of the classic balsa design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of local fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking plane.

The H-King MX2 Extreme 30E is perfect to take a pilot from general sport flying to confidently flying 3D aerobatics. It is lightweight, has a powerful brushless motor set-up, and features large control surfaces that make it great for lively tumbling and extreme, spirited types of flying. Things such as hovering, waterfalls, harriers, knife-edge, rolling circles, and other extreme 3D aerobatics are made much easier when flying the MX2 Extreme.

The Tundra has firmly established itself in the RC community and has now become the go-to electric RC plane model for most RC pilots. From intermediate pilots to the more experienced flier this RC plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all round toughness.

The Tundra has firmly established itself in the RC community and has now become the go-to model for most RC pilots. From intermediate pilots to the more experienced flier this electric RC plane will do it all. The Tundra is an extremely versatile RC airplane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all round toughness.

The Tundra has firmly established itself in the RC community and has now become the go-to electric RC plane for most RC pilots. From intermediate pilots to the more experienced flier this quality-built RC foam plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all-round toughness.

The Tundra has had a massive cult following over the years within the RC community as it's easily one of the best flying electric RC planes on the market with an impressive flight envelope. This was followed sometime later with the launch of the Grand Tundra which encompassed all your favorite features but on a larger scale. The Grand Tundra Plus keeps 99% of the features of the original version, the one change that has been made is to the wing servo connectors, these have a new design to give a stronger and more reliable connection.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

This great-looking and superb flying AVIOS KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.

The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the AVIOS team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.

This version of the popular Piper J-3 Cub is in a striking new Swiss color scheme which is a must for all scale pilots. This color scheme uses a lot less paint so there is a bit of a saving in weight which further reduces the already low wing loading. The attention to detail makes it an extremely realistic model, and it comes with a nice, generous size 1400mm wingspan. Like all Cub's with its large wingspan, and stable flying characteristics it is very easy to fly, perfect for low-hour pilots and experts alike. The Swiss Cub also has a new all-metal landing gear which is virtually indestructible, this will survive the hardest of landings. Further weight saving has been achieved by the removal of the metal tail bracing wires, these have been replaced with scale-looking, easy to fit, lightweight elasticated white shock chord.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.