A replacement rigging set that includes stranded flying wire and crimps for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

This version of the popular Piper J-3 Cub is in a striking new Swiss color scheme which is a must for all scale pilots. This color scheme uses a lot less paint so there is a bit of a saving in weight which further reduces the already low wing loading. The attention to detail makes it an extremely realistic model, and it comes with a nice, generous size 1400mm wingspan. Like all Cub's with its large wingspan, and stable flying characteristics it is very easy to fly, perfect for low-hour pilots and experts alike. The Swiss Cub also has a new all-metal landing gear which is virtually indestructible, this will survive the hardest of landings. Further weight saving has been achieved by the removal of the metal tail bracing wires, these have been replaced with scale-looking, easy to fit, lightweight elasticated white shock chord.

A replacement painted fuselage for the H-King Swiss J-3 Piper Cub, includes the windscreen and side windows, note that the engine cowl is not supplied with the replacement fuselage.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement pair of wings for the H-King Swiss J-3 Piper Cub, includes the ailerons and decals.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement horizontal stabilizer with elevator for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement vertical stabilizer with rudder for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement cowl with dummy engine for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement 12x6 propeller for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement all-metal main landing gear set with scale wheels for the H-King Swiss J-3 Piper Cub. This main landing gear is virtually indestructible and will survive the hardest of landings.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement tailwheel assembly complete with tailwheel and mounting screws for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement set of 3 carbon wing spars for joining the wings of the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement center wing canopy for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement accessory pack for the H-King Swiss J-3 Piper Cub. This set includes: Pushrods, Control Horns, Y Lead, Screws, and an Allen Key.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement 3648-700KV brushless motor with propeller adaptor for the H-King Swiss J-3 Piper Cub, and the Durafly SlowPoke.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different as will the Durafly SlowPoke.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

A replacement pre-painted wing complete with ailerons and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted fuselage complete with rudder, motor mounting box, and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted horizontal stabilizer complete with elevator, and elevator control horn for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted motor cowl complete with dummy engine for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted hatch cover with 1 x clear canopy, and 1 x silver-painted canopy for the H-King FG-1 Corsair "Lucky Gallon".

A replacement prop adapter with domed spinner nut for the H-King FG-1 Corsair "Lucky Gallon".

A replacement fuselage set with factory-applied decals for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement horizontal stabilizer with elevator for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement vertical stabilizer with rudder, mounting screw, and factory-applied decals for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement hatch cover that is supplied with a clear, and gold canopy for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement domed spinner with propeller hub assembly for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

This version of the Yak-11 is the Red Reno Racer, this is not a totally scale color scheme, but is loosely based on the Strega P-51 Reno Mustang. As mentioned above, being the racer version it is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 95A ESC and 16x6 prop will give the Yak-11 an incredible turn of speed in excess of 100mph. It is quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform with the Yak, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

The AVIOS Albatross HU-16 is a beautiful twin-engine flying boat with a large monohull, and wing floats, the entire underneath of the front portion of the hull is reinforced with plastic. This allows it to happily take the knocks and bangs of using a grass airfield to fly from, but as mentioned before, it really does come into its own when operating from your favorite lake or waterway. Taxi-ing, and lining up for take-off are made all that much easier with the water rudder and the supplied Aerostar forward/reverse water-resistant ESCs. Built-in flaps provide plenty of lift and make the landings and take-offs that much easier and extremely scale-like.

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.