The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

We all love to go out and fly our RC Planes on a nice day, and then have to stop when darkness comes. Now, with the Flybeam 2, you don't have to, you can carry on through dusk and into nightime with this amazing, fun to fly, but very stable EPO foam Night Flyer. The key feature of the Flybeam 2 is the pre-installed, multi-coloured RC plane LED light system, which also includes wing tip strobe lights. The new style LED lighting system on the Flybeam 2 has been redesigned from earlier versions of this model to be brighter, and much lighter in weight. They provide a distinct contrast between the upper and lower surfaces for easy orientation when flying in the dark and low light conditions.

The HobbyKing® ™ Walrus is a very capable, fun model that appeals to both new and experienced pilots alike. Easy to fly and easy to build, the Walrus is great value for money!

Made from tough EPO foam, the Walrus is simple to assemble, the colourful decals are pre-applied, and the brushless outrunner motor, ESC, and all servos are pre-installed, even the folding prop and spinner have been factory fitted! As well as being easy to assemble, the Walrus is very practical and features a stiff, CF-reinforced 2pc Plug-in-wing and a large canopy area that allows you to fit a wide range of lipoly packs. Its somewhat portly proportions also make the Walrus super easy to hand-launch. The great-looking scheme is perfect for orientation, and its appealing size gives the Walrus plenty of presence, as well as the ability to handle a little wind.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. Well known for stability, the Bixler is also an excellent choice for an inexpensive FPV platform and perfect for those lazy Sunday afternoons.

This version of the Bixler 1.1 is not supplied with a motor, ESC, servos, or RC equipment, it allows you to choose yourself the components you wish to use. Whatever you are looking for, the Bixler 1.1 has it covered.

"Learn to Fly the Tundra Way" with the Prime Tundra PT1200. This is yet another addition to the extremely popular Tundra series of STOL (Short Take-Off and Landing) airplanes from Durafly, but this one is aimed primarily, but not exclusively at the novice. The PT1200 is the perfect STOL trainer for those that want to get into this style of flying, as it inherits the excellent STOL flying characteristics of the Tundra lineage, it's also a lot of fun for seasoned Tundra fans to!

This H-King version of this very impressive F-18 Super Hornet is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-18 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The Durafly Gloster Gladiator is manufactured in strong EPO foam, to the usual high standards you have come to expect from this range of RC airplanes. As with most other Durafly models, it comes "Plug N Fly". This means it is supplied with an easy-to-assemble airframe, powerful pre-installed 3719-770KV brushless motor, Aerostar 40A ESC, and 4 pre-installed 9g digital servos. A vinyl decal sheet is included, these will need to be applied during the building process, this gives you the choice of using the silver finish as a base for creating your own color scheme. Once the model is assembled, all you require is your choice of 4ch or more receiver and a 2200mAh 4S (14.8V) LiPo battery.

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.

This version of the Vampire DH100 is finished in a Royal Canadian Air Force (RCAF) color scheme, this scheme was selected for its history and its orientation when flying. The RCAF obtained their Vampires in late 1948, and being their Air Force's first-ever jet fighter, they were an instant hit with the RCAF aircrew and pilots. The Vampire had an outstanding performance and graceful lines, this Durafly version captures these attributes beautifully.

The Durafly™ Ugly Stick V2 not only looks as good as the original but flies just as well too, perfectly capturing those excellent flight qualities of which the Ugly Stick was renown. Being the well mannered RC sports model it is, the Ugly Stick is suitable for both novice and experienced flyers alike. At the lower end of the speed range, it exhibits no bad stall tendencies and can be flown comfortably at half throttle if desired. However, when you wish to experience its true flying capabilities, open the throttle wide and the Ugly Stick will oblige, performing a full range of sport aerobatic maneuvers with the ease that made the original so popular. Due to the low current draw of the Ugly Stick V2 power system, you can also enjoy longer than average flying times with mixed power use.

Are you looking for extreme speed right out of the box? If so, we've got you covered. There is plenty of rad in the Radjet 800! With its amazing price, EPO foam, and being Plug and Fly, this brilliant model has no trouble earning the Radjet name.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

The Return of the “Stubby” Legend – Rediscover the Pure Joy of Flight

What makes a classic RC warbird stay relevant? It’s the ability to deliver maximum fun with minimum effort. The Durafly Brewster F2A Buffalo V2 920mm RC plane returns as the ultimate “grab-and-go” park-size warbird, combining authentic scale looks with modern Plug-N-Fly convenience.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

The Durafly Night Tundra follows in the footsteps of the popular and firmly established Tundra series. No longer do you have to finish flying when the sun sets, with the incredible, super-bright light system on the Night Tundra you can just carry on into the twilight and beyond. The Night Tundra retains the no-limits flying characteristics of the original Tundra. Whether it’s flying from rough bush fields, water, snow, or sand, aerobatics, glider towing, candy dropping (optional part), or just good old-fashioned super STOL slow-flying, the Night Tundra takes it all on with ease. Its lightweight yet rugged and beautifully finished EPO foam construction, powerful brushless set-up, and perfectly harmonized design give you instantly a feeling of confidence on the sticks as quickly as it puts a smile on your face.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

When Durafly released the original Auto-G it raised the bar by being the first Plug-N-Fly autogyro on the market, that bar has been raised even higher with the Auto-G2 V2. Keeping to the Durafly tradition, it is quick and simple to assemble, flies extremely well, and looks amazing in flight. The V2 upgrades include the addition of a durable 2mm fiber-reinforced nylon head plate, fiber-reinforced pushrods, a fully encased main mast, wider, stronger landing gear with large lightweight bush-style foam wheels, and a cowled-in motor, plus smaller internal electronics giving more space for the flight battery.

Want a plane that can take on anything? Born from the same stable as our best-selling SkyMule, the AVIOS BushMule is the sturdy workhorse of the sky. Taking rough terrain, water, and snow in its stride, this Plug and Fly airplane uses twin motors for great sport flying and STOL capabilities.

The AVIOS BushMule V2 carries on the BushMule pedigree but with some improvements, these include:

• Upgraded servo connection for the steerable nose-wheel
• Re-positioned main landing gear, this has been moved further back
• Brass threads in the wing mounts
• Upgraded propellers and spinners as used on the popular Avios Albatross
• New, eye-catching color scheme

XFly X1500 Twin Power FPV Aircraft 1500mm PNP

XFLY is continuing to expand its incredible range of EDF models with this fantastic-looking Lockheed Martin F-22 Raptor. It is a small, scale twin-EDF model of the supersonic all-weather stealth fighter that was developed for the United States Air Force. The US Air Force requirement was for an advanced tactical fighter to replace the F-15 Eagle and the F-16 Fighting Falcon that had the capability of competing with the Su-27 Flanker, and MiG-29 Fulcrum.

The Walrus is an extremely stable RC plane for the new flyer to the seasoned pro. Now you can light up the sky and enjoy the fun of night flying. LED super bright lights will light up your nightlife!

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.