Helicopters
-
-
Deluxe Helicopter Starter Shaft with One Way BearingSpecial Price $12.65 Regular Price $35.67Deluxe Helicopter Starter Shaft with One way Bearing
Suits standard starter or electric drill. Features a removable shaft and one way bearing.
Spec:
Length: 250mm (Total lenth)
Hex size: 6mm
Starter sfaft: 8mm
Learn More -
-
HobbyKing Helicopter Pitch Gauge Kit$6.26The HobbyKing helicopter pitch gauge is made from ultra-rigid fiberglass board and features dual ball bearings to ensure accurate measurements every time. This pitch gauge is supplied in kit form to keep production costs down which means we can pass the savings on to you!
Learn More
Specs:
Measurement: +/- 20 Deg
Size: 145mm x 105mm
Max Blade Width: 80mm
Note: An assembly guide can be found in the FILES tab below. -
-
-
-
FPV Tilt Camera Mount with Landing Gear$21.99The HobbyKing FPV tilt camera mounting system is a simple and easy way to mount your camera. Suitable for 450~500 class helicopters and made from light weight fibre glass material. The mounting plate features adjustable screw locations for mounting your heli and for relocating the camera mount to attain correct CoG. Kit includes screws, ball sockets, connection rods, linkages and pre-cut fiberglass board.Spec:Height: 185mm (to mounting plate)
Skid width: 190mm
Skid length: 290mm
Camera mount area width: 110mm
Camera mount area height: 100mm
Dry Weight: 188g (not including servo)Material: Fibre Glass
Required:1 x 9g ServoLearn More -
Canopy Cover - T-Rex 600EX (Red)Special Price $2.20 Regular Price $7.07Protect your canopy from scratches with a HobbyKing canopy cover. These canopy covers are made from a soft felt material and will keep your canopy looking its best.
Learn More
Suits: T-Rex 600EX
Color: Red -
-
HK-450 Glowing Tail and Light Set (Align part # HS1275)$4.06Night flying has never been more fun!
The HK-450 glow set includes flybar paddles, tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.Included.
HK-450 Flybar paddles.
HK-450 tail rotors.
HK-450 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # HS1275)Learn More -
HK-500 Glowing Tail and Light Set (Align part # H50031).$4.06Learn MoreNight flying has never been more fun!
The HK-500 glow set includes tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.
Included.
HK-500 tail rotors.
HK-500 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # H50031) -
Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)$2.11Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)
Learn More -
Hobbyking™ 0.7M Hardened Steel Helicopter Pinion Gear 6mm Shaft - 12T$2.96
Learn More
Hobbyking™ Hardened Steel Pinion gears are the last pinion gears you will ever need to purchase. The Pinion gears are machined from a special steel alloy and are hardened for ultimate strength and durability. During the manufacturing process, extremely tight tolerances are maintained so the pitch of the gear is precise. This means Hobbyking™ Pinion gears run very quietly and efficiently.
As Brass or Aluminum gears wear, the interface between the pinion and spur gears degrade. The hardened Pinions are so tough that you can eliminate the need for spare gears in your toolbox. The Pinion gears are also strong enough to survive any insane power system that you choose to fit in your 3D helicopter.
Specs:
Pitch: 0.7M
Tooth Count: 12T
Fits Shaft Size: 6mm
Weight: 2.65g -
Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)$2.42Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)
Learn More -
Flybarless Helicopter Pitch Gauge for use w/Smartphone$6.78This is a great tool for measuring the main blade pitch on your flybarless or flybar helicopter head. It is designed to hold your smartphone while using a leveling application to measure your heli blade's degrees of pitch. There are many free applications available for download on your smartphone that will work for this purpose. Just be sure to download one that displays the measurement in degrees.
Learn More
This handy tool is constructed from lightweight yet rigid glass fiber. It features spring loaded foam padded mount posts which will accommodate holding of just about any smartphone. This tool is especially helpful when measuring blade pitch on your flybarless helicopter head since there is no flybar to use for reference with a traditional style pitch gauge.
Note: All necessary hardware is included. Just add your own smartphone after downloading one of the many free IOS/Android leveling applications.
Specs:
Maximum height of adjustable mount posts: 95mm
Maximum width of main blade: 75mm -
-
FX071C 2.4GHz 4CH Flybarless RC Helicopter Replacement Plastic Main Frame PartsSpecial Price $0.34 Regular Price $1.28FX071C 2.4GHz 4CH Flybarless RC Helicopter Replacement Plastic Main Frame Parts.
Learn More -
FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement Tail Boom Set$1.88FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement Tail Boom Set.
Learn More -
FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement Swashplate$2.09FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement Swashplate.
Learn More -
FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement FuselageSpecial Price $2.75 Regular Price $9.53FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement Fuselage.
Had an accident with your FX070C?, this is a replacement fuselage that consists of the 2 sides and the tailboom, it does not include the front screen or the weapons.
Learn More -
FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement Transmitter (Mode1 & Mode2)Special Price $9.17 Regular Price $27.56FX070C 2.4GHz 4CH Flybarless RC Helicopter Replacement Transmitter (Mode1 & Mode2).
Changes easily from Mode 1 to Mode 2 just by sliding a switch on the back of the transmitter.
Learn More -
Carbon Fiber Main Frame Base Plate HK-550GT$5.78This is the carbon fiber main frame base plate for the HK-550GT helicopter.
Learn More -
Lightweight Aluminium Round Section Spacer M3x38mm (Silver) (10pcs)$10.99Lightweight Aluminium Round Section Spacer M3x38mm (Silver) (10pcs)
Lightweight aluminium spacers featuring a round cross section and a hex section (at each end) to fit a 5mm spanner. Ideal for use with helicopter and drone frames or similar applications where strong, accurate construction is required.
Specs:
Learn More
Thread: M3
Length: 38mm
Weight: 1.5g each
Login and Registration Form