Aircraft

Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch

Pioneer 1020mm - Replacement Horizontal Stabilizer

La Belle Dame 1180mm - Propeller Nuts

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Phantom FPV Flying Wing 1550mm - Replacement Motor Cover

The HobbyKing® ™ Walrus is a very capable, fun model that appeals to both new and experienced pilots alike. Easy to fly and easy to build, the Walrus is great value for money!

Made from tough EPO foam, the Walrus is simple to assemble, the colourful decals are pre-applied, and the brushless outrunner motor, ESC, and all servos are pre-installed, even the folding prop and spinner have been factory fitted! As well as being easy to assemble, the Walrus is very practical and features a stiff, CF-reinforced 2pc Plug-in-wing and a large canopy area that allows you to fit a wide range of lipoly packs. Its somewhat portly proportions also make the Walrus super easy to hand-launch. The great-looking scheme is perfect for orientation, and its appealing size gives the Walrus plenty of presence, as well as the ability to handle a little wind.

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set

HobbyKing Bixler 2 EPO 1500mm -  Replacement Flap Hinges (6pcs/bag)

Works for both Bixler 2 and Bix3 models.

Hobbyking Bixler 2 EPO 1500mm - Replacement Aileron Hinges (10pcs/bag)

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

P-51D Shangri La - Replacement Horizontal Tail

Super Kinetic - Replacement Motor Mount

Super Kinetic - Replacement Canopy

Super Kinetic - Replacement Control Wire - Steel (With Ball Link)

Super Kinetic - Replacement Decals (2pcs/set)

Durafly™ SkyMule 1500mm - Bottom Servo Hatch

HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set

HobbyKing® Bixler 3 Trainer 1550mm - Replacement Landing Gear

HobbyKing® Bix3 Trainer 1550mm - Replacement Tail Wheel

HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set

HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter

HobbyKing™ Wingnetic 805mm - Replacement Fuselage

HobbyKing™ Bixler 3 Trainer 1550mm - Replacement Wing Spar

HobbyKing™ Bix3 Trainer 1550mm - Replacement Wing Bolts

2 Pieces Included

Hobbyking™ Super-G Autogyro - Blade Grip Bolts

Includes 3 pieces

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

HobbyKing Hall Cherokee Glider 1700mm - Fuselage Set

EPO Fuselage with decals, plastic. control rods

Durafly™ EFX Racer - Replacement Fuselage (Yellow)

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

The B-17 Flying Fortress remains one of the most famous allied bombers of WW2.  Although it served in every theatre of the war, it was in the European Theatre of Operations (ETO) with the renowned 8th Air Force in particular, that this sturdy and well-armed heavy bomber flew its way into the history books.

Building on the success of our original HobbyKing "Memphis Belle" model we have redesigned this huge 1875mm wingspan warbird and now bring to you the best flying and best-looking rendition of this iconic heavy bomber available anywhere in this size. 

Our fantastic model is simple and fast to assemble right out of the box with all of the servos and ESCs pre-installed.  It is made from EPO foam, so it's as tough as you would expect and as the one-piece wing is removable, it is also very practical to transport.

The pre-fitted electric scale wheels retract forward like the real aircraft and are large enough to tackle almost any surface.  There is also plenty of power on tap from the four upgraded 850kv brushless motors. Counter-rotating props make zero torque, smooth take off's, the order of the day and with pre-fitted split flaps, landings are also stress-free.

But it's the attention to detail on this version that is impressive.  Panel lines have been reduced and two new accurate scale color schemes are now available.  Olive drab/grey and overall silver. These two schemes represent the vast majority of B17's that went into action and as an additional feature, we've also included a choice of two 8th Air Force decal sets for each color scheme as well as an optional chin turret so that you can create either an early "F" or later "G" variant. 

As a Flying Fortress, our model also bristles with guns, with top and ball turrets as well as tail, nose, and waist gun positions.  Dummy Wright Cyclone engines are finished with three-blade counter-rotating scale props and hubs and finally, working navigation & landing lights add to the overall realism level of this impressive model.

Beneath the surface, our B-17 has been beefed up with additional wing bracing and of course, she has been test flown extensively and it's in the air that this model really comes into its own.

You will be struck at how easy it is to fly, almost like a powered glider at times and even though it's more than capable of performing non-scale aerobatics including loops and rolls, it is at slower speeds that it looks every bit the heavy bomber.

With its impressive wingspan, low passes translate into a real presence in the air and the sound of those four props driving it forward just adds to the experience.

Our B-17 is a scale pilot's dream model. It's a big airplane that looks great, flies beautifully, and definitely has the "wow" factor that will have heads turning wherever and whenever you fly it.

The Walrus is an extremely stable RC plane for the new flyer to the seasoned pro. Now you can light up the sky and enjoy the fun of night flying. LED super bright lights will light up your nightlife!

XFLY J-65 Twin 40mm EDF WHITE PNP RC plane