Aircraft

P-51D Shangri La - Replacement Horizontal Tail

Avios Yakovlev Yak-52 HobbyKing Scheme Replacement Canopy.

Replacement fuselage for the Durafly Supermarine Spitfire Mk1a & Mk2a 1100mm series.  Comes with magnets and plastic fittings but does not include cowl or battery hatch. 

Replacement Durafly™ Spitfire Mk1a & Mk2a Main Wing, comes with control horns installed.

Please note:  No servos or extension leads are supplied with the replacement wing.

Durafly® ™ Messerschmitt Bf.110 - Replacement Radiator Set (1pair)

Durafly™ Spitfire Mk24 - 5-Blade Hub Set

Durafly™ T-28 Trojan 1100mm V2 - Horizontal Tail

Durafly™ T-28 Trojan 1100mm V2 - Canopy inc FPV Pilot Tray.

Please note: This canopy will also fit the Durafly T-28 Trojan Naval Aviation Centennial Edition, but of course the color scheme is different.

Durafly™ T-28 Trojan 1100mm V2 - Control and Mounting Accessories

Durafly™ T-28 Trojan 1100mm V2 - Propeller Shaft and Spinner Nut

Hobbyking 1875mm B-17 F/G Flying Fortress (V2)(Olive  )- Replacement Vertical Stabilizer

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Olive) - Replacement Nose Glazing

Hobbyking 1875mm B-17 F/G Flying Fortress (V2)(Olive)- Replacement canopy/battery hatch.

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement fuselage 1350mm (53.33in)

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Main Wing 1875mm(72.25in)

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Horizontal Tailplane

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Vertical Stabilizer

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement canopy / battery hatch.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

Soaring the sky and hunting thermals is what this RC ASW28 electric sailplane made with EPO carbon-reinforced wings and blown plastic fuselage is designed to do. The huge wingspan and plug and fly design make this glider a must-have for all RC glider flyers.

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

The B-17 Flying Fortress remains one of the most famous allied bombers of WW2.  Although it served in every theatre of the war, it was in the European Theatre of Operations (ETO) with the renowned 8th Air Force in particular, that this sturdy and well-armed heavy bomber flew its way into the history books.

Building on the success of our original HobbyKing "Memphis Belle" model we have redesigned this huge 1875mm wingspan warbird and now bring to you the best flying and best-looking rendition of this iconic heavy bomber available anywhere in this size. 

Our fantastic model is simple and fast to assemble right out of the box with all of the servos and ESCs pre-installed.  It is made from EPO foam, so it's as tough as you would expect and as the one-piece wing is removable, it is also very practical to transport.

The pre-fitted electric scale wheels retract forward like the real aircraft and are large enough to tackle almost any surface.  There is also plenty of power on tap from the four upgraded 850kv brushless motors. Counter-rotating props make zero torque, smooth take off's, the order of the day and with pre-fitted split flaps, landings are also stress-free.

But it's the attention to detail on this version that is impressive.  Panel lines have been reduced and two new accurate scale color schemes are now available.  Olive drab/grey and overall silver. These two schemes represent the vast majority of B17's that went into action and as an additional feature, we've also included a choice of two 8th Air Force decal sets for each color scheme as well as an optional chin turret so that you can create either an early "F" or later "G" variant. 

As a Flying Fortress, our model also bristles with guns, with top and ball turrets as well as tail, nose, and waist gun positions.  Dummy Wright Cyclone engines are finished with three-blade counter-rotating scale props and hubs and finally, working navigation & landing lights add to the overall realism level of this impressive model.

Beneath the surface, our B-17 has been beefed up with additional wing bracing and of course, she has been test flown extensively and it's in the air that this model really comes into its own.

You will be struck at how easy it is to fly, almost like a powered glider at times and even though it's more than capable of performing non-scale aerobatics including loops and rolls, it is at slower speeds that it looks every bit the heavy bomber.

With its impressive wingspan, low passes translate into a real presence in the air and the sound of those four props driving it forward just adds to the experience.

Our B-17 is a scale pilot's dream model. It's a big airplane that looks great, flies beautifully, and definitely has the "wow" factor that will have heads turning wherever and whenever you fly it.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.