Aircraft

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.