Aircraft

This great-looking and superb flying AVIOS KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.

The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the AVIOS team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.

A replacement wing center section for the AVIOS KingTwin 1700 with factory-applied decals, and wiring. 

A replacement left-hand wing panel for the AVIOS KingTwin 1700 with factory-applied decals, aileron, spars, and latching catch.

A replacement right-hand wing panel for the AVIOS KingTwin 1700 with factory-applied decals, aileron, spars, and latching catch. 

A replacement vertical stabilizer for the AVIOS KingTwin 1700 with factory-applied decals, rudder, anti-collision beacon, and wiring. 

A replacement pair of horizontal stabilizers for the AVIOS KingTwin 1700 with factory-applied decals, elevators, and spars.

A replacement canopy/battery hatch with crystal clear windshield for the AVIOS KingTwin 1700.

A replacement pair of painted motor cowls with dummy exhausts for the AVIOS KingTwin 1700.

A replacement pair of spinners and backplates for the AVIOS KingTwin 1700.

A complete set of replacement pushrods for the AVIOS KingTwin 1700.

A replacement Aerostar 3748-820KV brushless motor with mount and connectors for the AVIOS KingTwin 1700.

A replacement fuselage for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement wing center section for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement set of outer wing panels for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement horizontal stabilizer and elevators for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement vertical stabilizer and rudder for the 1500mm AVIOS BushMule V2 with factory-applied decals.

A replacement set of pre-painted motor cowlings for the 1500mm Avios BushMule V2.

Note: These replacement spare parts for the Avios BushMule V2 are also compatible with V1 Avios BushMule. Please note you may need to repaint it due to the different color schemes in each version.

AVIOS BushMule V2 Twin-Motor Sports/STOL Airplane Replacement Canopy w/Decals.

Note: These replacement spare parts for the AVIOS BushMule V2 are also compatible with V1 AVIOS BushMule. Please note you may need to repaint it due to the different color schemes in each version.

A replacement decal set for the 1500mm AVIOS BushMule V2.

This version of the popular Piper J-3 Cub is in a striking new Swiss color scheme which is a must for all scale pilots. This color scheme uses a lot less paint so there is a bit of a saving in weight which further reduces the already low wing loading. The attention to detail makes it an extremely realistic model, and it comes with a nice, generous size 1400mm wingspan. Like all Cub's with its large wingspan, and stable flying characteristics it is very easy to fly, perfect for low-hour pilots and experts alike. The Swiss Cub also has a new all-metal landing gear which is virtually indestructible, this will survive the hardest of landings. Further weight saving has been achieved by the removal of the metal tail bracing wires, these have been replaced with scale-looking, easy to fit, lightweight elasticated white shock chord.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

A replacement wing set for the H-King Reno Aces P-51 "Galloping Ghost". Includes the aileron servo covers, pushrods, and factory-applied decals

A replacement fuselage set for the H-King Reno Aces P-51 "Galloping Ghost", includes factory-applied decals. Please note that the top decking, canopy, and cowl are not supplied with this fuselage set.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement hatch cover with a golden canopy for the H-King Reno Aces P-51 "Galloping Ghost".

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

A replacement pre-painted wing complete with ailerons and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted fuselage complete with rudder, motor mounting box, and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted horizontal stabilizer complete with elevator, and elevator control horn for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted motor cowl complete with dummy engine for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted hatch cover with 1 x clear canopy, and 1 x silver-painted canopy for the H-King FG-1 Corsair "Lucky Gallon".

A replacement prop adapter with domed spinner nut for the H-King FG-1 Corsair "Lucky Gallon".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".