Aircraft

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

Are you ready to be the Red Baron of your local park?  Well with the fantastic Von Stik you can be a flying ace in minutes.   

A great slow stick design, the Von Stik has been made to be a super light, fly anywhere model, with a powerful geared motor running off  a 1S 3.7V 400mAh lipoly battery.  

Supplied with its own 2.4Ghz radio for interference free flying, easy to assemble and finished in a striking Red Baron finish, with the Von Stik you will be making diving attacks and strafing runs in no time at all.

It's easy to fly with its basic rudder and elevator control system and is very forgiving for the novice pilot.  In fact, the Von Stik makes for a perfect first model for any young person or even for the experienced pilot who is looking for a totally fun-fly aircraft that can be thrown up in a local park without any fuss.

Features:
• 2.4Gh radio system
• Light weight
• Easy to assemble
• Rudder/Elevator model
• Perfect for beginners 
• Beautiful bold "Red Baron" finish

Specs:
Wingspan: 52cm
Length: 38cm
RC System: 2.4Ghz
Propeller: 6050 (slowfly)
Weight: 75g
Battery Required: 1S 3.7V 350-400mAh Lipoly
Control Distance: 150m 
Mode: 2

Soaring the sky and hunting thermals is what this RC ASW28 electric sailplane made with EPO carbon-reinforced wings and blown plastic fuselage is designed to do. The huge wingspan and plug and fly design make this glider a must-have for all RC glider flyers.

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

After listening to customer feedback the Durafly team has designed this, stunningly painted, Red Edition Me-163 Komet. It is based on the plane that EK16 commander, Wolfgang Spate, flew on the first operational mission. After this flight the plane was returned to it's more traditional color scheme. As well as this stunning color the Durafly team has incorporated a wider tracked 'dolly' to improve ground handling during take-off. The Durafly Me-163 is in itself a truly a ground breaking model. Not only does this Komet feature a fully working scale 'dolly' style undercarriage, blistering performance and a high-quality finish, but it is designed out of the box to accept a model rocket engine! In its Plug and Fly (PnF) form, Durafly's 950mm (37.5") span Me-163 comes with all electronics pre-installed and ready to hook up to your choice of 6ch receiver. A minimal part count allows assembly to be completed in just a few steps. The molded EPO has a highly detailed surface finish externally, carbon reinforcement internally and features a color matched hard plastic belly skid. It also has good access to all electronics via the battery/canopy hatch, excellent cooling through out and of course a very authentic looking scheme. Quality is definitely the name of the game.

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

The H-King Teksumo is a fun combat wing made from almost unbreakable EPP foam that is easy to build and will provide hours of fun! It comes in four unique colors so you and your flying buddies can have hours of fun ripping up the sky with some high adrenalin combat.

The engineers at Durafly have come out with another easy to fly hand launcher, the Durafly Brewster F2A Buffalo. Prior to World War II the US Navy was looking for a monoplane to fly off their aircraft carriers and the Buffalo was the winner. The Durafly Buffalo comes in two stylish color schemes. The easy to see US Navy pre-war colors and the more “navelised”, early WWII US Navy colors.

You’ll slice through the sky with this brilliantly colored SkySword. The streamlined looks and elegant lines show that this plane is built for speed. It comes with a 70mm 12-blade EDF fan to provide that realistic jet sound.

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

The Durafly SlowPoke is an EPO foam model of the classic balsa design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of local fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking plane.

The Phoenix 2400 is the largest glider in the Phoenix range. It comes with an almost indestructible ABS plastic hull and strong EPO foam wings and tail section. With its smooth, stiff hull, the Phoenix is ​​durable for a lifetime and yet light enough for the glider to work without any problems. An additional canopy with camera mount is included. Once you have your camera installed, you can either enjoy FPV flying or just take pictures of your flights.

Welcome to the ultimate scale experience. The Avios Spitfire Mk5 has been built using super scale, a new modelling technique that allows for incredible detail. Featuring more artistry than the 1100mm Spitfire, the larger model has visible panel lines, exhaust, cannons, and scale split flaps with turn indicators for added realism.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

This version of the Yak-11 is based on a full-size that currently flies in Germany, the color scheme honors the French units that flew for the Russians in WW2. As mentioned above, being the warbird version it is supplied with a power train that has been developed for more torque. Using a 6S LiPo pack, the powerful and reliable H-King power system gives top speeds approaching 100mph, and the vertical performance has to be seen to be believed.  Big, scale warbird maneuvers are a dream to fly with the amount of torque and power available, and the rolling maneuvers are very axial. Impress the on-lookers with slow scale-like flypasts with flaps and the wheels down, or fast, low strafing runs and pulling up into a half Cuban eight or a similar maneuver. The Yak-11 in this commemorative color scheme looks fantastic from all angles when flying or when sitting on the ground.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

Ideal for both beginners and experienced pilots, this 1/16 scale EPP remote-control airplane delivers durability and high-performance fun. With a 695mm wingspan and lightweight design, it offers excellent stability, low stall speed, smooth gliding, and one-click aerobatics—including rolls, inverted flight, and loops! Powered by a brushless 2204 motor and 7.4V battery, it delivers up to 25 minutes of flight and supports real-time video transmission with an optional camera for immersive FPV flying.

Genuine replacement 3536 900KV brushless outrunner motor for the Durafly Curtiss P-40 Warhawk V2 "Aleutian Tiger" 1100mm (PNF).

Genuine replacement battery hatch with matching Aleutian Tiger livery for the Durafly Curtiss P-40 Warhawk V2 1100mm (PNF).

Genuine replacement tail wheel assembly for the Durafly Curtiss P-40 Warhawk V2 "Aleutian Tiger" 1100mm (PNF).

Replacement full-metal retract and landing gear set for the Durafly Curtiss P-40 Warhawk V2 "Aleutian Tiger" 1100mm (PNF).

Genuine replacement retract control module for the Durafly Curtiss P-40 Warhawk V2 "Aleutian Tiger" 1100mm (PNF).

Genuine replacement control and mounting accessories for the ailerons, flaps, elevator and rudder of the Durafly Curtiss P-40 Warhawk V2 "Aleutian Tiger" 1100mm (PNF).

Genuine replacement Aleutian Tiger decal set for the Durafly Curtiss P-40 Warhawk V2 1100mm (PNF), including tiger graphics, US Army markings and scale insignia.

Genuine replacement metal prop shaft and adapter set with propeller nut and mounting screws for the Durafly Curtiss P-40 Warhawk V2 "Aleutian Tiger" 1100mm (PNF).

Genuine lightweight EPO replacement fuselage with matching Aleutian Tiger livery for the Durafly Curtiss P-40 Warhawk V2 1100mm (PNF).

Main wing for Durafly P-40 Warhawk V2 to replace

Learn More

Horizontal Stab for Durafly P-40 Warhawk V2 to replace

Propeller blade set for Durafly P-40 Warhawk V2 to replace.

Spinner set for Durafly P-40 Warhawk V2 to replace

Learn More