Aircraft

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

A complete replacement fuselage for the Durafly Auto-G2 V2 Gyrocopter with decal.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement horizontal stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of wooden mast supports with linkage rods and screws for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A complete replacement Auto-Start system including motor, gearbox, flexi-shaft drive, etc for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement battery hatch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 4018 800KV brushless outrunner for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 blade grip assemblies for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main rotor plate for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 main blades with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main landing gear for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement pair of 90mm foam main wheels with retainers for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement tail wheel assembly for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement head button for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement spinner nut for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement motor cowl for the Durafly Auto-G2 V2 Gyrocopter.

A replacement set of fiber-reinforced pushrods for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement mast fairing with fixing screws for the Durafly Auto-G2 V2 Gyrocopter.

A replacement Auto-Start switch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 20A brushless ESC for the Durafly Auto-G2 V2 Gyrocopter includes an XT60 connector and the JST connector for the Auto-Start system.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement vertical stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement fuselage with rudder for the green Durafly MFX Racer.

A replacement wing with ailerons, pushrods, and wing tips for the Durafly MFX Racer.

A replacement horizontal stabilizer with elevators for the green Durafly MFX Racer.

A replacement battery hatch for the green Durafly MFX Racer.

A replacement motor cowl for the green Durafly MFX Racer.

A replacement set of 4 control horns and clevises for the Durafly MFX Racer.

A replacement 5x5 propeller for the Durafly MFX Racer.

These are clear versions on the popular 6x3 propeller for mini quad, the clear plastic catches the light from LED illumination to create a glowing disk in the sky great for night flying. The clear plastic is extremely durable and even stronger than some colored variants. 

Features:
• Clear frosted designed for LED night illumination
• Extremely durable material
• Standardized 5mm mounting for a direct replacement

Specs:
Size: 6x3
Hub: 5mm
Rotation: CW/CCW

Included:
2 x CW rotation
2 X CCW rotation

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Phantom FPV Flying Wing 1550mm - Replacement Motor Cover

Phantom FPV Flying Wing 1550mm - Replacement Vertical Stabilizer (1pair)

Phantom FPV Flying Wing 1550mm - Replacement Main Wing (1pair)

*Note* For V2 version only. V2 has removeable wing panels.

This is a great “bread board” pin ready accelerometer for your Arduino or other microcontroller projects

Features:
• BMA180 three-axis ultra-high performance digital accelerometer, which provides a 14-bit digital output via a 4-wire SPI or 2-wire I 2 C interface
• Full scale measurement range can be set to ± 1g balance, 1.5G, 2G, 3G, 4G, 8G or 16G
• programmable wake-up
• Low-g and high-g detection
• Tap detection
• Slope detection
• Self-test capability
• The sensor also has two operating modes: low noise, low power consumption in a tiny 3x3mm 12-pin LGA package BMA180
• The sensor can be between 1.62 to 3.6V VDD and 1.2 to 3.6V VDDIO supply will typically only consume 650uA standard mode.

Specs:
Size: 21 x 10 x 2.6mm
Voltage: 1.2-3.6v
Output: SPI or I2C

*Note: This is not an original Arduino brand product.