Aircraft

Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)

Hobbyking™ Hardened Steel Pinion gears are the last pinion gears you will ever need to purchase. The Pinion gears are machined from a special steel alloy and are hardened for ultimate strength and durability. During the manufacturing process, extremely tight tolerances are maintained so the pitch of the gear is precise. This means Hobbyking™ Pinion gears run very quietly and efficiently.

As Brass or Aluminum gears wear, the interface between the pinion and spur gears degrade. The hardened Pinions are so tough that you can eliminate the need for spare gears in your toolbox. The Pinion gears are also strong enough to survive any insane power system that you choose to fit in your 3D helicopter.

Specs:
Pitch: 0.7M
Tooth Count: 12T
Fits Shaft Size: 6mm
Weight: 2.65g

Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)

Hardened Helicopter Pinion Gear 6mm/1.0M 16T (1PC)

Durafly™ EFX Racer - Replacement Fuselage (Yellow)

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

Durafly™ EFX Racer - Replacement Battery Hatch (Yellow)

Durafly™ EFX Racer - Replacement Horizontal Stabilizer

Durafly™ EFX Racer - Replacement Cowl (Yellow)

This set consists of the lower front fuselage skid plate and the wing center section/belly skid plate for the Durafly EFX Racer series of airplanes.

Avios Yakovlev Yak-52 HobbyKing Scheme Replacement Canopy.

Durafly® ™ Tundra - Horizontal Tail / Elevator. This assembly is suitable for the V1, V2, and the Night versions of the Tundra.

Durafly® ™ Tundra - Foam Canopy / Battery Hatch w/Magnet

Durafly Tundra - Main Wheel Set. These wheels are suitable for the V1, V2, and the Night versions of the Tundra.

A replacement tail wheel assembly with wheel that is suitable for the 1300mm Tundra V1, V2, V3, and Night.

A kit of plywood parts for the Durafly Tundra V1, V2, V3, and Night to build a mount/tray for your FPV equipment. The Tundra series is the perfect mount for FPV flying due to its stability and slow flying characteristics.

Durafly Tundra - Propeller Adaptor / Motor Shaft. This assembly is suitable for the V1, V2, and the Night versions of the Tundra.

A replacement pair of wing struts that are suitable for the 1300mm Tundra V1, V2, V3, and Night.

A replacement set of control rods, links, bolts, and screws for the 1300mm Tundra V1, V2, V3, and Night.

A complete replacement set of landing gear, excluding wheels, for the 1300mm Tundra V1, V2, V3, and Night.

Durafly® ™ Tundra - Decal Set 

Durafly Tundra replacement 3636-900KV motor w/mount and propeller shaft that is suitable for the V1, V2, V3, and the Night versions of the Tundra.

Replacement fuselage for the Durafly Supermarine Spitfire Mk1a & Mk2a 1100mm series.  Comes with magnets and plastic fittings but does not include cowl or battery hatch. 

Replacement Durafly™ Spitfire Mk1a & Mk2a Main Wing, comes with control horns installed.

Please note:  No servos or extension leads are supplied with the replacement wing.

Stinger 64 MK2 4S EDF Sport Jet - Replacement Tail Set

Stinger 64 MK2 4S EDF Sport Jet - Replacement Nose Cone

Sonic 64 EDF Wing 1230mm - Replacement EDF w/ Motor

Spec
Motor: 5000kv
Fan Unit: 64mm
Voltage: 11.1v Lipoly Battery
ESC Required: 40amp 

Durafly Hyperbipe 900mm - Replacement Wing Struts

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)

Quanum Exoskeleton for RunCam

Are you worried about your RunCam action camera not surviving a hard landing?  Simply give your RunCam a rigid exoskeleton frame.

Manufactured from super light weight alloy and machined to allow easy access to all of the RunCams many functions while maintaining a clear view from the lens, this frame gives you peace of mind when you send your favorite action camera into the thick of it!

Features:
• Purpose made to fit the RunCam Action Camera
• Tough, exoskeleton style design
• Superlight Alloy
• Access to all camera functions
• Bolt together case
• Lens shield

Specs:
Dimensions: 69 x 46 x 23mm
Weight: 21.5g

This is a great tool for measuring the main blade pitch on your flybarless or flybar helicopter head. It is designed to hold your smartphone while using a leveling application to measure your heli blade's degrees of pitch. There are many free applications available for download on your smartphone that will work for this purpose. Just be sure to download one that displays the measurement in degrees.

This handy tool is constructed from lightweight yet rigid glass fiber. It features spring loaded foam padded mount posts which will accommodate holding of just about any smartphone. This tool is especially helpful when measuring blade pitch on your flybarless helicopter head since there is no flybar to use for reference with a traditional style pitch gauge.

Note: All necessary hardware is included. Just add your own smartphone after downloading one of the many free IOS/Android leveling applications.

Specs:
Maximum height of adjustable mount posts: 95mm
Maximum width of main blade: 75mm

Are you looking to convert your SK450 quadcopter into a flying dead cat? If so, we have just the thing! This kit allows you to convert your standard SK450 into the "Dead Cat" style configuration with or without (your choice) the mess and hassle of mounting your own dead feline to the frame.

In addition to flying your deceased family pet around at home or your favorite local flying site, this configuration is also ideal for aerial video/photography as the front arms offer an extra wide field of view. The integrated camera mount plate located at the front of the frame is perfect for mounting a GoPRO or similar sized camera.

This kit includes everything necessary to convert your SK450 quad frame into either a wicked camera rig or a morbid dead pet mobile, the choice is yours!

*Note: This is a conversion kit only, the arms and other components are not included, it requires the use of original SK450 frame parts to complete.

Specs:
Front arm width: 490mm
Rear arm width: 375mm
Weight: 460g (completed frame w/out electronics)

Includes:
Lower main frame plate
Upper main frame plate
All necessary hardware

5.6mm x 18mm M3 Nylon Tapped Spacer (10pc).

Perfect for mounting Multi-rotor control boards.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.