Aircraft

A replacement carbon landing gear for the H-King MX2 Extreme 30E.

A replacement 13x4 composite propeller for the H-King MX2 Extreme 30E.

A replacement 3720-900KV brushless motor with prop shaft for the H-King MX2 Extreme 30E.

A set of 4 replacement propeller blades for the H-King 800mm Hawker Tempest.

A replacement 3 blade propeller assembly with hub and screws for the H-King 750mm Chance Vought F4U Corsair.

A replacement spinner assembly with insert for the H-King 750mm Chance Vought F4U Corsair.

The Wargo Signature Edge 540T 3D is yet another incredible airplane in the series inspired by the renowned 3D pilot Michael Wargo. The Edge 540T was specifically designed for very precise 3D flying and aerobatic training. Michael Wargo, our team pilot, and 3D expert, wanted a foam aircraft that was stiffer, and lighter than other foamies. This was achieved by the combination of a stiff, lightweight balsa frame covered with lightweight, crash-resistant EPP foam.

A replacement painted fuselage for the H-King Swiss J-3 Piper Cub, includes the windscreen and side windows, note that the engine cowl is not supplied with the replacement fuselage.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement pair of wings for the H-King Swiss J-3 Piper Cub, includes the ailerons and decals.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement horizontal stabilizer with elevator for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement vertical stabilizer with rudder for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement cowl with dummy engine for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement 12x6 propeller for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement all-metal main landing gear set with scale wheels for the H-King Swiss J-3 Piper Cub. This main landing gear is virtually indestructible and will survive the hardest of landings.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement tailwheel assembly complete with tailwheel and mounting screws for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement set of 3 carbon wing spars for joining the wings of the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement center wing canopy for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement accessory pack for the H-King Swiss J-3 Piper Cub. This set includes: Pushrods, Control Horns, Y Lead, Screws, and an Allen Key.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement 3648-700KV brushless motor with propeller adaptor for the H-King Swiss J-3 Piper Cub, and the Durafly SlowPoke.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different as will the Durafly SlowPoke.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

A replacement wing set for the H-King Reno Aces P-51 "Galloping Ghost". Includes the aileron servo covers, pushrods, and factory-applied decals

A replacement fuselage set for the H-King Reno Aces P-51 "Galloping Ghost", includes factory-applied decals. Please note that the top decking, canopy, and cowl are not supplied with this fuselage set.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement hatch cover with a golden canopy for the H-King Reno Aces P-51 "Galloping Ghost".

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

A replacement pre-painted wing complete with ailerons and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted fuselage complete with rudder, motor mounting box, and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted horizontal stabilizer complete with elevator, and elevator control horn for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted motor cowl complete with dummy engine for the H-King FG-1 Corsair "Lucky Gallon".

A replacement pre-painted hatch cover with 1 x clear canopy, and 1 x silver-painted canopy for the H-King FG-1 Corsair "Lucky Gallon".

A replacement prop adapter with domed spinner nut for the H-King FG-1 Corsair "Lucky Gallon".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement fuselage set with factory-applied decals for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".