Aircraft

Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch

Pioneer 1020mm - Replacement Horizontal Stabilizer

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

Telemicro 520mm - Replacement Spinner

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

Durafly® ™ Micro Series - Replacement Motor Mount

Super Kinetic - Replacement Motor Mount

Super Kinetic - Replacement Canopy

Super Kinetic - Replacement Control Wire - Steel (With Ball Link)

Super Kinetic - Replacement Decals (2pcs/set)

HobbyKing™ Wingnetic 805mm - Replacement Fuselage

Durafly™ EFX Racer - Replacement Fuselage (Yellow)

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

Durafly™ EFX Racer - Replacement Battery Hatch (Yellow)

Durafly™ EFX Racer - Replacement Horizontal Stabilizer

Durafly™ EFX Racer - Replacement Cowl (Yellow)

This set consists of the lower front fuselage skid plate and the wing center section/belly skid plate for the Durafly EFX Racer series of airplanes.

Stinger 64 MK2 4S EDF Sport Jet - Replacement Tail Set

Durafly Hyperbipe 900mm - Replacement Wing Struts

Are you ready to be the Red Baron of your local park?  Well with the fantastic Von Stik you can be a flying ace in minutes.   

A great slow stick design, the Von Stik has been made to be a super light, fly anywhere model, with a powerful geared motor running off  a 1S 3.7V 400mAh lipoly battery.  

Supplied with its own 2.4Ghz radio for interference free flying, easy to assemble and finished in a striking Red Baron finish, with the Von Stik you will be making diving attacks and strafing runs in no time at all.

It's easy to fly with its basic rudder and elevator control system and is very forgiving for the novice pilot.  In fact, the Von Stik makes for a perfect first model for any young person or even for the experienced pilot who is looking for a totally fun-fly aircraft that can be thrown up in a local park without any fuss.

Features:
• 2.4Gh radio system
• Light weight
• Easy to assemble
• Rudder/Elevator model
• Perfect for beginners 
• Beautiful bold "Red Baron" finish

Specs:
Wingspan: 52cm
Length: 38cm
RC System: 2.4Ghz
Propeller: 6050 (slowfly)
Weight: 75g
Battery Required: 1S 3.7V 350-400mAh Lipoly
Control Distance: 150m 
Mode: 2

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

After listening to customer feedback the Durafly team has designed this, stunningly painted, Red Edition Me-163 Komet. It is based on the plane that EK16 commander, Wolfgang Spate, flew on the first operational mission. After this flight the plane was returned to it's more traditional color scheme. As well as this stunning color the Durafly team has incorporated a wider tracked 'dolly' to improve ground handling during take-off. The Durafly Me-163 is in itself a truly a ground breaking model. Not only does this Komet feature a fully working scale 'dolly' style undercarriage, blistering performance and a high-quality finish, but it is designed out of the box to accept a model rocket engine! In its Plug and Fly (PnF) form, Durafly's 950mm (37.5") span Me-163 comes with all electronics pre-installed and ready to hook up to your choice of 6ch receiver. A minimal part count allows assembly to be completed in just a few steps. The molded EPO has a highly detailed surface finish externally, carbon reinforcement internally and features a color matched hard plastic belly skid. It also has good access to all electronics via the battery/canopy hatch, excellent cooling through out and of course a very authentic looking scheme. Quality is definitely the name of the game.

Specs:
Product Name: Volantex Mini T-28 Trojan
Version: RTF 
Material: EPP
Wingspan: 400 mm (15.75 inches)
Length: 317 mm (12.48 inches)
Motor: 10mm coreless motor
Receiver: 2 in 1 integrated board
Servo: 2g plastic gear *3
Propeller: 130X70mm
Remote control: 2.4GHz 4CH
Flying weight: 60g
Recommended battery: 3.7V-360MAH
Package size (length x width x height): 35X35*15.5cm
Flight time: 14mins
Charging time: 2.5 hours

Included:
1 x Volantex (RTF) Mini T-28 Trojan EPP 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane Trainer
1 x 4ch 2.4GHz transmitter
1 x 3.7V 400mAh LiPo battery
1 x USB battery charger
1 x User manual

Required:
4 x AA batteries for transmitter

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and a swept forward wing for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

Features:
• EPP material, good toughness and more resistance to falling and explosion.
• With flight control, can fly in a strong wind of level 5.
• Simple assembly, convenient disassenbly.
• Compatible with Futaba receivers (5V for S-BUS, 3V for DSM).
• With low signal and voltage alarm,timely remind the return.
• Strong power motor,quick response and fast locking.
• Support two takeoff methods: ground takeoff and hand throw takeoff.
• With self-stabilization system, you can get start quickly.
• 6 channel glider remote controlled aircraft (rise, descent, left turn, right turn, forward roll, 3D crane flight)
• Support one-key 3D stunts - With 6-Axis gyroscope, automatically balance, suitable for beginners.

Specs:
Item Name: QIDI-550
Material: EPP
Wingspan: 505mm
Fuselage Length: 620mm
Motor: 2004 KV2800 brushless motor
Servo: 4.3g digital *3pcs
ESC: 12A brushless
Propeller: 6x3cm 2-blade
Battery: 7.4V 500mAh
Vertical Flight Time: 20mins
Normal Flight Time: 20mins
Charging Time: 20mins
Remote Control: 2.4G 6CH Mode 2
Control Range: About 400m
Takeoff Weight: 140g
Product Size: 50x62x10cm
Package Size: 54.6x11.8x19.3cm
Assembly: Required

Included:
1 x QIDI 550 (RTF) SWIFT-ONE Sky Challenger EPP 6CH Profile 3D Aerobatic Plane w/6-Axis Gyro Stabilization System (505mm)
1 x 6ch 2.4GHz transmitter
1 x 7.4V 500mAh LiPo battery
1 x Spare propeller
1 x Screwdriver
1 x USB battery charger
1 x User manual

Required:
4 x AA batteries for transmitter