Aircraft
-
-
-
FPV Tilt Camera Mount with Landing Gear$21.99The HobbyKing FPV tilt camera mounting system is a simple and easy way to mount your camera. Suitable for 450~500 class helicopters and made from light weight fibre glass material. The mounting plate features adjustable screw locations for mounting your heli and for relocating the camera mount to attain correct CoG. Kit includes screws, ball sockets, connection rods, linkages and pre-cut fiberglass board.Spec:Height: 185mm (to mounting plate)
Skid width: 190mm
Skid length: 290mm
Camera mount area width: 110mm
Camera mount area height: 100mm
Dry Weight: 188g (not including servo)Material: Fibre Glass
Required:1 x 9g ServoLearn More -
Canopy Cover - T-Rex 600EX (Red)Special Price $2.20 Regular Price $7.07Protect your canopy from scratches with a HobbyKing canopy cover. These canopy covers are made from a soft felt material and will keep your canopy looking its best.
Learn More
Suits: T-Rex 600EX
Color: Red -
-
HK-450 Glowing Tail and Light Set (Align part # HS1275)$4.06Night flying has never been more fun!
The HK-450 glow set includes flybar paddles, tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.Included.
HK-450 Flybar paddles.
HK-450 tail rotors.
HK-450 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # HS1275)Learn More -
HK-500 Glowing Tail and Light Set (Align part # H50031).$4.06Learn MoreNight flying has never been more fun!
The HK-500 glow set includes tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.
Included.
HK-500 tail rotors.
HK-500 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # H50031) -
Durafly™ Micro Series - Replacement Motor MountSpecial Price $0.90 Regular Price $1.15Durafly® ™ Micro Series - Replacement Motor Mount
Learn More -
Super Kinetic - Replacement Horizontal Wing (With Plastic Parts and Sticker)$11.62Super Kinetic - Replacement Horizontal Wing (With Plastic Parts and Sticker)
Learn More -
-
-
Super Kinetic - Replacement Control Wire - Steel (With Ball Link)$3.10Super Kinetic - Replacement Control Wire - Steel (With Ball Link)
Learn More -
Super Kinetic - Replacement Brushless Motor (2630-KV1000)$18.60Super Kinetic - Replacement Brushless Motor (2630-KV1000)
Learn More -
Super Kinetic - Replacement Decals (2pcs/set)$11.56Super Kinetic - Replacement Decals (2pcs/set)
Learn More -
AVIOS BushMule Sports/STOL Airplane 1500mm Optional Ski Set (3pcs)$12.99AVIOS BushMule Twin-Motor Sports/STOL Airplane 1500mm Optional Ski Set (3pcs).
Please note: With small modifications, this ski set is suitable for other models such as the Durafly Slow Poke, etc.
Learn More -
Durafly™ SkyMule 1500mm - Bottom Servo Hatch$2.67Durafly™ SkyMule 1500mm - Bottom Servo Hatch
Learn More -
HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set$3.81HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set
Learn More -
HobbyKing® Bixler 3 Trainer 1550mm - Replacement Landing Gear$4.89HobbyKing® Bixler 3 Trainer 1550mm - Replacement Landing Gear
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Tail Wheel$3.87HobbyKing® Bix3 Trainer 1550mm - Replacement Tail Wheel
Learn More -
HobbyKing™ Bix3 Trainer 1550mm - Replacement Motor 2630 1400kv$18.44HobbyKing™ Bix3 Trainer 1550mm - Replacement Motor 2630 1400kv
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set$3.87HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter$3.55HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter
Learn More -
HobbyKing™ Wingnetic 805mm - Replacement FuselageSpecial Price $17.26 Regular Price $19.99HobbyKing™ Wingnetic 805mm - Replacement Fuselage
Learn More -
HobbyKing™ Bixler 3 Trainer 1550mm - Replacement Wing Spar$2.24HobbyKing™ Bixler 3 Trainer 1550mm - Replacement Wing Spar
Learn More -
HobbyKing™ Super-G Autogyro - Auto Start SystemSpecial Price $6.60 Regular Price $27.05HobbyKing™ Super-G Autogyro - Auto Start System
Learn More -
HobbyKing Hall Cherokee Glider 1700mm - Fuselage SetSpecial Price $5.50 Regular Price $21.13HobbyKing Hall Cherokee Glider 1700mm - Fuselage Set
EPO Fuselage with decals, plastic. control rods
Learn More -
Turnigy Talon Carbon Fiber Main Frame Upper Plate (1pc/bag)Special Price $1.60 Regular Price $6.05Turnigy Talon Carbon Fiber Main Frame Upper Plate (1pc/bag)
Learn More -
Turnigy Talon Carbon Fiber Main Frame Lower Plate (1pc/bag)Special Price $1.00 Regular Price $4.86Turnigy Talon Carbon Fiber Main Frame Lower Plate (1pc/bag)
Learn More -
HobbyKing X525 V3 Hardware Set (complete)Special Price $1.99 Regular Price $4.44HobbyKing X525 V3 Hardware Set (complete)
Learn More -
Propeller Guards for the 250 Class Racer (5inch) Set of 4Special Price $1.30 Regular Price $4.44Anyone that flies the small 250 class quads has gone through a few props, whether you're trying to fit through something or had an acro mishap. These prop guards will adapt to most 250 class frames via the motor mounting bolts. The guards will not only help save your props but help protect others and property from the high speed 5 inch props.
Features:
• Adaptable to most frames
• Light weight and durable G10
• Protects your props and propertySpecs:
Learn More
Size: For 5 inch props
Weight: 4.5g each
Mounting: Via motor mounting 12,16,19mm -
Turnigy Multistar 4225-390Kv 16Pole Multi-Rotor Outrunner$34.28Looking for the ultimate power system for your next Multi-rotor project? Look no further!
Learn More
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.
The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.
These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.
Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g -
Turnigy Multistar 4225-610Kv 16Pole Multi-Rotor Outrunner$32.21Looking for the ultimate power system for your next Multi-rotor project? Look no further!
Learn More
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.
The 4225-610 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.
These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.
Spec:
KV(RPM/V): 610
Lipo cells: 4s
Max Surge Watts(W): 330
Working current: 16 amps
Max.current(10s): 22 amps
No Load Current: 0.3 amps
Intemal Resistance: 0.091 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g -
Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)$2.11Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)
Learn More
Login and Registration Form