Aircraft

The H-King Crusader 30E is based on the classic stick design. This electric RC plane can be flown by both beginners and experts. It is constructed from lightweight ply and balsa that is painted with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local hobby club.

The H-King MX2 Extreme 30E is perfect to take a pilot from general sport flying to confidently flying 3D aerobatics. It is lightweight, has a powerful brushless motor set-up, and features large control surfaces that make it great for lively tumbling and extreme, spirited types of flying. Things such as hovering, waterfalls, harriers, knife-edge, rolling circles, and other extreme 3D aerobatics are made much easier when flying the MX2 Extreme.

This great-looking little racer can trace its lineage back to the very popular Rare Bear which we sold a few years ago. This was a very fast parkflyer based on the Reno Racers that was amazing fun to fly, was very tough and it became a firm favorite extremely quickly.

The Wargo Signature Edge 540T 3D is yet another incredible airplane in the series inspired by the renowned 3D pilot Michael Wargo. The Edge 540T was specifically designed for very precise 3D flying and aerobatic training. Michael Wargo, our team pilot, and 3D expert, wanted a foam aircraft that was stiffer, and lighter than other foamies. This was achieved by the combination of a stiff, lightweight balsa frame covered with lightweight, crash-resistant EPP foam.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The H-King Viper 64 is affordable, very stable, and has predictable handling qualities, making it the ideal choice for your first venture into flying EDF jets. It has stunning looks, and the performance on its 6S set-up gives it a fantastic turn of speed and the ability to perform big, jet-style maneuvers, this makes it also the perfect sports jet for the more experienced RC pilot. The H-King Viper 64 is based on a small two-seater homebuilt jet airplane designed by the Viper Aircraft Corporation in the States during the late 1990s.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

Super Kinetic - Replacement Motor Mount

Super Kinetic - Replacement Canopy

Super Kinetic - Replacement Control Wire - Steel (With Ball Link)

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

Need spare parts for your H-King Voltigeur? Use these replacement wing panels to fix your plane.

Replacement cowling for the H-King Voltigeur