Aircraft

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

The Volantex RC 4-channel P-51D Mustang is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.

The Volantex RC 4-channel Messerschmitt Bf 109 is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.

Looking to make your video platform ultra-smooth? This is the ultimate in smooth high pole count purpose built brushless gimbal motors.

The 2804 motor comes with flush mounting so any DIY to PRO projects are simple and straight forward, it also comes with the standard female connector pre-installed, So wiring is as simple as plugging it in. It’s a perfect match to our Brushless Gimbal Stabilization Board and IMU.

The 2804 is the perfect size for cameras around 100-300 grams (GoPro style).

Spec:
Poles: 12N14P
KV(RPM/V): 210
Resistance: 10.4omh
Weight: 35g
Wire: 0.19mm
Torque: 240g
Bottom holes center to center: 16mm and 19mm
Top holes center to center: 12mm

Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch

FP100 Helicopter Tail Fin

The Q222K Spaceship is a real entry-level FPV quadcopter with some features that have become the standard with more expensive models including altitude hold, Headless Mode, and automatic one key return.

With stable hovering, automatic take-off, and WiFi FPV for aerial photography this is a perfect FPV training quad. It has a 720P HD camera delivering excellent images to help make the entire FPV experience more immersive and enjoyable. Simply connect your smartphone WiFi to view the entire flight on your phone in real-time.

Pioneer 1020mm - Replacement Horizontal Stabilizer

La Belle Dame 1180mm - Propeller Nuts

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

The Quad plate has 4 10x10mm slots for motor arms and 45x45mm posts for flight controller mounting. The center plate as other provisions for mounting other Bits and holes at 10mm intervals.

Specs:
Size: 100x100mm
Weight: 77g
Color: Green

The all-new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind. It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V.

It works with 2-13 cell LiPo packs and supplies an interference-free constant 5V to your receiver and 12v to a gimbal, camera, or any other 12V accessory.

Always check the input voltage of any accessory before connecting the SBEC supply to it.
 
Specs:
Type: Switching
Input Protection: Reverse polarity protection
Output (Constant): 5v/5A and 12v/10A
Input: 6v-50v (2-13 cell LiPo) 
Dimensions: 60 x 25 x 17mm
Weight: 42g

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

RotorBits Anodized Aluminum Construction Profile 250mm (Gray)

Specs:
Size (LxW): 250 x 10mm
Weight: 28g
Color: Gray

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

Composite fixture plate for mounting, bracing or assembly based on the standard 10mm hole spacing of RotorBits. 

Specs:
Size: 56x56mm
Thickness: 1.5mm
Angles: 90deg cross
Weight: 7.5g
Color: Black mate
Hole size: M2.5
Hole spacing: 10mm (RotorBits standardized)
Bag of two

R/C Helicopter Pitch Gauge, a must for when setting up your RC helicopter.

Specs:
Range: +12°, -12°
Material: Plastic
Suits: Most mini-helicopters

These new upswept upgrade arms provide improved stability and faster forward flight. The arms are manufactured from toughened plastic which provides added strength.  

The arms are designed to fit DJI Flamewheel style multirotor frames such as the V500 / H550 Frames

Specs:
Length: 210mm
Weight: 62g (per arm)
Color: White

Main Gear - Walkera V120D02S 3D Mini Helicopter

HM-V120D02S-Z-10

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Phantom FPV Flying Wing 1550mm - Replacement Motor Cover

Phantom FPV Flying Wing 1550mm - Replacement Vertical Stabilizer (1pair)

Phantom FPV Flying Wing 1550mm - Replacement Main Wing (1pair)

*Note* For V2 version only. V2 has removeable wing panels.

This is a great “bread board” pin ready accelerometer for your Arduino or other microcontroller projects

Features:
• BMA180 three-axis ultra-high performance digital accelerometer, which provides a 14-bit digital output via a 4-wire SPI or 2-wire I 2 C interface
• Full scale measurement range can be set to ± 1g balance, 1.5G, 2G, 3G, 4G, 8G or 16G
• programmable wake-up
• Low-g and high-g detection
• Tap detection
• Slope detection
• Self-test capability
• The sensor also has two operating modes: low noise, low power consumption in a tiny 3x3mm 12-pin LGA package BMA180
• The sensor can be between 1.62 to 3.6V VDD and 1.2 to 3.6V VDDIO supply will typically only consume 650uA standard mode.

Specs:
Size: 21 x 10 x 2.6mm
Voltage: 1.2-3.6v
Output: SPI or I2C

*Note: This is not an original Arduino brand product.

Superheterodyne 3310 Wireless receiver module +315RF Wireless transmitter module 

Arduino 6-DOF IMU Module Attitude Control 6DOF 3205 345

*Note: This is not an original Arduino brand product.

USBasp AVR Programming Device for ATMEL Processors

Includes:
1 x USBasp Device
1 x Cable

Suits the HobbyKing Quadcopter Control Board.

Keep your Telemetry Radios safe! These cases are made out of slightly translucent ABS plastic, so you still can see TX/RX LEDs. They have a very tight fit and finish and are clearly labeled. These cases will make your setup look like Pro gear, while keeping them safe!

Designed to fit FPV Radio Telemetry Kit - 915Mhz/433MHz(#42846/42847,not included), But fits other brand Telemetry Radios as well.

Includes:
3M Foam Double-tape X1
Ground module Case X1
Air module Case X1

The flight mode switcher has been designed for open source autopilots such as APM, PX4 and Pix etc. It can switch the flight mode accurately and quickly and replaces the troublesome 2 stage and 3 stage switchers.

Users can set the parameters for the flight mode switcher on the unit and choose the most suitable modes for their requirements. The flight mode switcher features a stable performance, is easy to set up and is small and lightweight.

Typical flight modes are as follows:
• STA (Stabilized) Model will automatically level itself
• SIM (Simple) Allows you to control the movement of the model from the pilots point of view regardless of which way the model is facing
• ALT (Altitude Hold) When this mode is selected it will hold this altitude
• LOI (Loiter) Allows model to hover in the same spot on its own without any input from the pilot
• AUT (Auto) The model will follow a pre-programmed course stored in the autopilot
• RTL (Return to land) Once selected the model will return and land at the point of take-off

The flight mode switcher is simple to install on your transmitter but it is not "plug & play", there is a small amount of soldering involved inside the Tx. See under the "Files" tab for installation instructions.

Once installed on your transmitter and set up in "Mission Planner" it is very simple to use, just press the relevant mode button on the switcher and the model will go into that mode. There is an indicator light to show which mode has been selected and is in use.

Features:
• Allows the user to easily set 6 flight modes
• Simple and straightforward to install
• Compact and lightweight
• Status indicator lights

Specs:
Type: Flight Mode Switcher
Working Voltage: 3~5V
Modes: 6 selectable
Operating Temperature: -10°C~+60°C
Dimensions: 59 x 29 x 9.3mm
Weight: 13g

Included:
Flight Mode Switcher
Connection harness

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

The X-CAM A10-3H Gimbal it at the top of the list when it comes to gimbals, the A10 has True continuous rotation 3-Axis ability with A/V Video link transfer. Full control over Roll, Tilt, Yaw, Mode and Zero home. And charging with A/V out transfer for the GoPro hero camera.

There are a lot of 3 Axis gimbals on the market, but only a few that use a slipper for true 360Deg continues rotation and also transfers the A/V output from the GoPro to the top controller for VTX use. The A/V line also powers/charges the GoPro. Another key feature on the X-CAM is its ability to go to zero or home using referencing sensors, this is great for when transitioning from a yaw control to a forward flight mode the gimbal will auto go to the front position.

The A10 uses an advanced method of vibration control and mounting and is a full CNC aluminum frame design with integrated motors for a light 280g weight.

If you’re serious about some aerial Photography with a GoPro this is the gimbal for you

Features:
• Continuous 360deg rotation
• A/V transfer cable with power
• 5 chs of adjustment over Sbus
• Sbus and PPM support
• Home sensors
• GUI and Upgrade ability
• Wide input voltage range
• Aluminum construction

Specs:
Weight:  280g ( without GOPRO )
Stabilization frequency:  5200Hz
Input voltage:  7.4v ~ 16.8v ( 2S ~ 4S Lipo )
Tilt travel:  +-90 degree; Roll travel:  +-45 degree
YAW travel:  360 degrees unlimited rotation

These custom made aluminum extrusions are perfect for you Multi-Rotor DIY projects, no more borrowing moms shower curtain rods...they have internal riffling (ribbing) added to remain ultra-light but have increased strength and anti-vibration characteristics as well as anodized for various color options for orientation and Bling.

Specs:
Diameter:12.8 x 12.8mm (.5inch)
Length: 600mm
Color: Black
weight: 55g

These custom made aluminum extrusions are perfect for you Multi-Rotor DIY projects, no more borrowing moms shower curtain rods...they have internal riffling (ribbing) added to remain ultra-light but have increased strength and anti-vibration characteristics as well as anodized for various color options for orientation and Bling.

Specs:
Diameter:15 x 15mm
Length: 600mm
Color: Black
weight:63g

2mm 2 Blade CNC Folding Propeller Adapter CW & CCW (Gold)

Perfect for multi-rotors, pack comes complete with M2.5 mounting screws for the folding propeller blades.

Specs:
Suits Motor Shafts: 2mm
Blade Thickness: 3mm
Blade Mounting: M2.5
Direction: 1 x Clockwise, 1 x Counterclockwise
Material: Aluminum
Color: Gold
Weight: 6g each