Aircraft

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

Are you ready to be the Red Baron of your local park?  Well with the fantastic Von Stik you can be a flying ace in minutes.   

A great slow stick design, the Von Stik has been made to be a super light, fly anywhere model, with a powerful geared motor running off  a 1S 3.7V 400mAh lipoly battery.  

Supplied with its own 2.4Ghz radio for interference free flying, easy to assemble and finished in a striking Red Baron finish, with the Von Stik you will be making diving attacks and strafing runs in no time at all.

It's easy to fly with its basic rudder and elevator control system and is very forgiving for the novice pilot.  In fact, the Von Stik makes for a perfect first model for any young person or even for the experienced pilot who is looking for a totally fun-fly aircraft that can be thrown up in a local park without any fuss.

Features:
• 2.4Gh radio system
• Light weight
• Easy to assemble
• Rudder/Elevator model
• Perfect for beginners 
• Beautiful bold "Red Baron" finish

Specs:
Wingspan: 52cm
Length: 38cm
RC System: 2.4Ghz
Propeller: 6050 (slowfly)
Weight: 75g
Battery Required: 1S 3.7V 350-400mAh Lipoly
Control Distance: 150m 
Mode: 2

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

Capable of taking off from and landing on just about any surface including water, ice, snow, grass and more, the Skipper is a truly versatile model. Add to that its super low wing loading and high-performance brushless power system and you've got yourself a model that is an absolute blast to fly!

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

The H-King Teksumo is a fun combat wing made from almost unbreakable EPP foam that is easy to build and will provide hours of fun! It comes in four unique colors so you and your flying buddies can have hours of fun ripping up the sky with some high adrenalin combat.

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

You’ll slice through the sky with this brilliantly colored SkySword. The streamlined looks and elegant lines show that this plane is built for speed. It comes with a 70mm 12-blade EDF fan to provide that realistic jet sound.

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

The Durafly SlowPoke is an EPO foam model of the classic balsa design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of local fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking plane.

The H-King MX2 Extreme 30E is perfect to take a pilot from general sport flying to confidently flying 3D aerobatics. It is lightweight, has a powerful brushless motor set-up, and features large control surfaces that make it great for lively tumbling and extreme, spirited types of flying. Things such as hovering, waterfalls, harriers, knife-edge, rolling circles, and other extreme 3D aerobatics are made much easier when flying the MX2 Extreme.

This great-looking little racer can trace its lineage back to the very popular Rare Bear which we sold a few years ago. This was a very fast parkflyer based on the Reno Racers that was amazing fun to fly, was very tough and it became a firm favorite extremely quickly.

The Tundra has firmly established itself in the RC community and has now become the go-to electric RC plane model for most RC pilots. From intermediate pilots to the more experienced flier this RC plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all round toughness.