Aircraft

13x4.7 SF Turnigy Carbon Mixed slow fly prop w/adapters (2 pcs).

Turnigy Carbon Mixed slow fly prop w/adapters 14x4.7 SF (2 pc).

Turnigy 14x4.7 Slowfly Propeller Pusher Black (2pcs).

45mm Pocket-Quad Prop CCW (From Rear) - Green (5pc)

Suitable for 1mm shaft

The Turnigy 8045 propellers were made specifically for Multi-Rotor use. They are a direct replacement for the DJI Phantom and Walkera QR X350. They are utilizing a slot (DJI) style hub for proper centering and non-slip engagement. The Turnigy line of props come in CW and matched CCW rotations and Black or White coloring. The center hubs are beefed up, to alleviate the problem other props have of splitting hubs and tossing blades! They also have a thicker cross-section to minimize flexing and increase their durability. The 8045’s precision molding will allow these props to require very little to no balancing.

Specs:
Size: 8-4.5
Rotation: Standard
Hub: slot (DJI) style, 8mm bottom DIA 7mm flat to flat and drop down to 6mm top hole
Color: Black

Included:
Four standard rotation props

The Turnigy 8045 propellers were made specifically for Multi-Rotor use. They are a direct replacement for the DJI Phantom and Walkera QR X350. They are utilizing a slot (DJI) style hub for proper centering and non-slip engagement. The Turnigy line of props come in CW and matched CCW rotations and Black or White coloring. The center hubs are beefed up, to alleviate the problem other props have of splitting hubs and tossing blades! They also have a thicker cross-section to minimize flexing and increase their durability. The 8045’s precision molding will allow these props to require very little to no balancing.

Specs:
Size: 8-4.5
Rotation: CW
Hub: slot (DJI) style, 8mm bottom DIA 7mm flat to flat and drop down to 6mm top hole
Color: Black

Included:
Four clockwise rotation props

Made of nylon, this E-Prop is lightweight and durable. Available in both rotations, it is perfect for your multi-rotor project. Includes adaptors.

Specs:
Diameter: 10 inch
Pitch: 5 inch
Weight: 8.9g
Rotation: Standard
Color: Black

Made of nylon, this E-Prop is lightweight and durable. Available in both rotations, it is perfect for your multi-rotor projects and twin engined models. Includes adaptors.

Made of nylon, this E-Prop is lightweight and durable. Available in both rotations, it is perfect for your multi-rotor project. Includes adaptors.

Specs:
Diameter: 10 inch
Pitch: 5 inch
Weight: 8.9g
Rotation: CCW
Color: Green

Made of nylon, these E-Props are lightweight and durable. Available in both rotations, they are perfect for your twin-motor aircraft or drones, includes adaptors.

Anyone that flies the small 250 class quads has gone through a few props, whether you're trying to fit through something or had an acro mishap.  These prop guards will adapt to most 250 class frames via the motor mounting bolts. The guards will not only help save your props but help protect others and property from the high speed 5 inch props. 

Features:
• Adaptable to most frames
• Light weight and durable G10
• Protects your props and property 

Specs:
Size: For 5 inch props
Weight: 4.5g each
Mounting: Via motor mounting 12,16,19mm

These are clear versions on the popular 5x3 propeller for mini quad, the clear plastic catches the light from LED illumination to create a glowing disk in the sky great for night flying. The clear plastic is extremely durable and even stronger than some colored variants. 

Features:
• Clear frosted designed for LED night illumination
• Extremely durable material
• Standardized 5mm mounting for a direct replacement

Specs:
Size: 5x3 or 5030
Hub: 5mm
rotation: CW/CCW 

Included:
2 x CW rotation
2 X CCW rotation

Ghost 6030 Orange Propellers For Night Flying LED Illumination Set Of 4 (CW/CCW)

Specs:
Material: Nylon
Size: 6 x 3
Qty: 4pc (2 x CW 2 x CCW)
Color: Orange

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Green
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Black) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Black
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: Orange
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (White) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: White
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Green
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Orange
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 5030 Plastic Self Tightening Propellers 5 x 3 (CW/CCW) (Green) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 3
Thread: 5mm
Color: Green
Weight: 3.0g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Green
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Black) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Black
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Red) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Red
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Orange) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Orange
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

 The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

 The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

The 4225-610 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 610
Lipo cells: 4s
Max Surge Watts(W): 330
Working current: 16 amps
Max.current(10s): 22 amps
No Load Current: 0.3 amps
Intemal Resistance: 0.091 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-locking and have an insert fitted to suit 5mm motor shafts.

Specs:
Length: 5inch
Pitch: 3 inch
Center Hole:5mm
Weight:  5.3g each
Rotation: Clockwise and counterclockwise

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-tightening and have an insert fitted to suit 5mm motor shafts with colour coded hubs for easy identification.

Specs:
Length: 5inch
Pitch: 4.5 inch
Center Hole:5mm
Weight: 5g each
Rotation: Clockwise and counterclockwise

These propellers are beautifully finished and highly efficient

APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)

These propellers are beautifully finished and highly efficient

T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)

The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up, so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.

Specs:
Size: 10-4.5
rotation: CW
Hub: slot (DJI) style, 8mm bottom Dia  7mm flat to flat and drop down to 6mm top hole

Included:
Two CW Props

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)

Quanum Exoskeleton for RunCam

Are you worried about your RunCam action camera not surviving a hard landing?  Simply give your RunCam a rigid exoskeleton frame.

Manufactured from super light weight alloy and machined to allow easy access to all of the RunCams many functions while maintaining a clear view from the lens, this frame gives you peace of mind when you send your favorite action camera into the thick of it!

Features:
• Purpose made to fit the RunCam Action Camera
• Tough, exoskeleton style design
• Superlight Alloy
• Access to all camera functions
• Bolt together case
• Lens shield

Specs:
Dimensions: 69 x 46 x 23mm
Weight: 21.5g

Are you looking to convert your SK450 quadcopter into a flying dead cat? If so, we have just the thing! This kit allows you to convert your standard SK450 into the "Dead Cat" style configuration with or without (your choice) the mess and hassle of mounting your own dead feline to the frame.

In addition to flying your deceased family pet around at home or your favorite local flying site, this configuration is also ideal for aerial video/photography as the front arms offer an extra wide field of view. The integrated camera mount plate located at the front of the frame is perfect for mounting a GoPRO or similar sized camera.

This kit includes everything necessary to convert your SK450 quad frame into either a wicked camera rig or a morbid dead pet mobile, the choice is yours!

*Note: This is a conversion kit only, the arms and other components are not included, it requires the use of original SK450 frame parts to complete.

Specs:
Front arm width: 490mm
Rear arm width: 375mm
Weight: 460g (completed frame w/out electronics)

Includes:
Lower main frame plate
Upper main frame plate
All necessary hardware

5.6mm x 18mm M3 Nylon Tapped Spacer (10pc).

Perfect for mounting Multi-rotor control boards.